sslug-teknik team mailing list archive

[Jørgen Heesche <heesche@xxxxxxxxxx>]

Hi!
Det er ikke muligt at kalde op til min ISP med kinternet.
Min opsætning er flg.:
provider0:
 BOOTPROTO='none'
 DIALCOMMAND='ATDT'
 DIALPREFIX=''
 INIT1='ATZ'
 INIT2='AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0'
 INIT8='ATM0'
 INIT9=''
 MODEM_DEVICE='/dev/ttyS1'
 PPPD_OPTIONS=''
 PROVIDER='provider0'
 SPEED='115200'
 STARTMODE='manual'
 UNIQUE='i7s0.aC9wNk5A1q1'
 [jph@newpc SuSE]$more provider
 ASKPASSWORD='no'
 DEMAND='yes'
 DNS1='195.82.195.101'
 DNS2='129.142.7.101'
 DSLSUPPORTED='no'
 FIREWALL='no'
 IDLETIME='300'
 ISDNSUPPORTED='no'
 MODEMSUPPORTED='yes'
 MODIFYDNS='yes'
 PASSWORD='<password>'
 PHONE='100177407734'
 PROVIDER='Get2net'
 STUPIDMODE='no'
 USERNAME='<user>'

ifcfg-ppp0:
 BOOTPROTO='none'
 DIALCOMMAND='ATDT'
 DIALPREFIX=''
 INIT1='ATZ'
 INIT2='AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0'
 INIT8='ATM0'
 INIT9=''
 MODEM_DEVICE='/dev/ttyS1'
 PPPD_OPTIONS=''
 PROVIDER='provider0'
 SPEED='115200'
 STARTMODE='manual'
 UNIQUE='i7s0.aC9wNk5A1q1'

Ved opkald ses flg. i logggen:
 SuSE Meta pppd (smpppd-ifcfg), Version 1.06 on linux.
 Status is: disconnected
 trying to connect to smpppd
 connect to smpppd
 Status is: disconnected
 Status is: connecting
 pppd[0]: Plugin passwordfd.so loaded.
 pppd[0]: --> WvDial: Internet dialer version 1.42
 pppd[0]: --> Initializing modem.
 pppd[0]: --> Sending: ATZ
 pppd[0]: ATZ
 pppd[0]: OK
 pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
 pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
 pppd[0]: ERROR
 pppd[0]: --> Bad init string.
 pppd[0]: --> stdin not read/write and $MODEM not set
 pppd[0]: Connect script failed
 Status is: disconnected
 pppd[0] died: Connect script failed (exit code 8)

Ved i ifcfg-ppp0 at sætte INIT"='' fås flg.
 SuSE Meta pppd (smpppd-ifcfg), Version 1.06 on linux.
 Status is: disconnected
 trying to connect to smpppd
 connect to smpppd
 Status is: disconnected
 Status is: connecting
 pppd[0]: Plugin passwordfd.so loaded.
 pppd[0]: --> WvDial: Internet dialer version 1.42
 pppd[0]: --> Initializing modem.
 pppd[0]: --> Sending: ATZ
 pppd[0]: ATZ
 pppd[0]: --> Sending: ATQ0
 pppd[0]: ATQ0
 pppd[0]: OK
 pppd[0]: --> Re-Sending: ATZ
 pppd[0]: ATZ
 pppd[0]: OK
 pppd[0]: --> stdin not read/write and $MODEM not set
 pppd[0]: Connect script failed
 Status is: disconnected
 pppd[0] died: Connect script failed (exit code 8)

Scriptet smpppd-ifcfg går altså ned før det når til at kalde op.
Opsætning er foretaget med Yast, som godt kan se, at det er et Diva ISDN 
Modem. Hvordan skal kinternet konfigureres for at kunne virke?

Der er også en wvdial.conf:
[Dialer Defaults]
Modem = /dev/modem
Baud = 57600
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 =
Area Code =
Phone = 0
Username =
Password =
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1

og en smpppd.conf:
# see "man smpppd" and "man smpppd.conf" for more information
stop-on-disconnect = notdemand
open-inet-socket = no
number-of-loglines = 250

Jeg ved ikke om disse to conf-filer bruges.

Med venlig hilsen

Jørgen Heesche