sslug-teknik team mailing list archive

["morten@xxxxxxxxxxxxxx" <morten@xxxxxxxxxxxxxx>]

Hej

Jeg har nu brugt et par uger på at få min parallelprinter (HPLaserJet 6L )
til at virke - uden held.

Jeg kører debian og unstabel, med 2.4.22. Jeg ved ikke helt, hvor jeg skal
begynde, at beskrive mit problem. 

Dog har jeg disse tanker: 

1) Jeg tror ikke mit parallelport er i "funktion", da der ikke står parallel
på listen (men alt muligt andet) se evt. denne her:
------------
home:~# lpinfo -v
network socket
network http
network ipp
network lpd
direct scsi
serial serial:/dev/ttyS0?baud=115200
serial serial:/dev/ttyS1?baud=115200
serial serial:/dev/ttyS2?baud=115200
serial serial:/dev/ttyS3?baud=115200
direct usb:/dev/usb/lp0
direct usb:/dev/usb/lp1
direct usb:/dev/usb/lp2
direct usb:/dev/usb/lp3
direct usb:/dev/usb/lp4
direct usb:/dev/usb/lp5
direct usb:/dev/usb/lp6
direct usb:/dev/usb/lp7
direct usb:/dev/usb/lp8
direct usb:/dev/usb/lp9
direct usb:/dev/usb/lp10
direct usb:/dev/usb/lp11
direct usb:/dev/usb/lp12
direct usb:/dev/usb/lp13
direct usb:/dev/usb/lp14
direct usb:/dev/usb/lp15
-------------

2) Jeg har forsøgt at loade kernel/drivers/parport (parallelport) via
modconf:
--------
Installing module parport_pc. If the device isn't there, or isn't configured
correctly, this could cause your system to pause for up to a minute.

/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_ecp_write_data_Rb2be757e
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_read_nibble_R8a3a0013
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_epp_read_addr_R485a0f16
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_epp_write_data_R6257a65f
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_register_port_R6a1aa91f
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_proc_register_Rfccf7f06
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_proc_unregister_Rfc1985ed
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_wait_peripheral_R0786bf50
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_epp_write_addr_R15924867
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_read_byte_R496f0e65
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_enumerate_Rb019f67c
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_ecp_read_data_R3e9bd2d6
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_unregister_port_R53435cc1
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_ecp_write_addr_Rc57b9b46
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_interrupt_Rb3ec0c3b
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_parse_dmas_Rc976df0b
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_write_compat_Rca60e714
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_wait_event_Re3049e50
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_parse_irqs_Rfe3a2867
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_ieee1284_epp_read_data_Race74130
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: unresolved symbol
parport_announce_port_R9e4a6cda
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: insmod /lib
modules/2.4.22/kernel/drivers/parport/parport_pc.o failed
/lib/modules/2.4.22/kernel/drivers/parport/parport_pc.o: insmod parport_pc
failed

Installation failed.
depmod: *** Unresolved symbols in /lib/modules/2.4.22/kernel/drivers
parport/parport_pc.o

Please press ENTER when you are ready to continue.
-----------------
3) jeg har også compilet min egen kerne.. (aner ikke om det "konflikter" med
modconf?)

home: ~# make menuconfig

Jeg har sat alt til under parallel port support -->

Hjælp mig venligst, hvis der er nogen som har en ide?

Med venlig hilsen
Morten Therkildsen