← Back to team overview

sslug-teknik team mailing list archive

Re: Zolid Digital Camera SX-410 Z3

 


Den Tue, 10 Feb 2004 17:50:47 +0100. skrev Jesper K. Pedersen:

>>>>>Klip<<<<<
> Har du prøvet og checke /var/log/messages imens du tilslutter kameraet,
> for at se om systemet genkender den som "usb mass storage" og at den
> henter modulerne ind for at bruge den? (lav evt. lsmod efter du har
> tilsluttet kameraet og vis os listen sammen med eventuelle USB beskeder i
> /var/log/messages filen)
> 
> Mvh
> Jesper K. Pedersen

Hej

Jeg har prøvet at mounte op til /dev/sdh1.... Still no bell.

Min lsmod ser således ud:
Module                  Size  Used by    Not tainted
vfat                   11820   0  (autoclean)
fat                    38040   0  (autoclean) [vfat]
scsimon                 9312   0  (unused)
usb-storage            91616   0  (unused)
sd_mod                 13804   0  (autoclean) (unused)
lp                      8160   0
parport_pc             25544   1
parport                34472   1  [lp parport_pc]
snd-seq-midi            5056   0  (autoclean) (unused)
snd-opl3-synth         12680   0  (autoclean) (unused)
snd-seq-instr           7204   0  (autoclean) [snd-opl3-synth]
snd-seq-midi-emul       6924   0  (autoclean) [snd-opl3-synth]
snd-ainstr-fm           2928   0  (autoclean) [snd-opl3-synth]
snd-seq-oss            32000   0  (unused)
snd-seq-midi-event      6080   0  [snd-seq-midi snd-seq-oss]
snd-seq                42544   2  [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-midi-emul snd-seq-oss snd-seq-midi-event]
snd-pcm-oss            43652   0
snd-mixer-oss          14200   1  [snd-pcm-oss]
snd-cmipci             23800   1
snd-pcm                79588   0  [snd-pcm-oss snd-cmipci]
snd-page-alloc          9044   0  [snd-pcm]
snd-mpu401-uart         4704   0  [snd-cmipci]
snd-rawmidi            17760   0  [snd-seq-midi snd-mpu401-uart]
snd-opl3-lib            8004   0  [snd-opl3-synth snd-cmipci]
snd-timer              18436   0  [snd-seq snd-pcm snd-opl3-lib]
snd-seq-device          5832   0  [snd-seq-midi snd-opl3-synth snd-seq-oss snd-seq snd-rawmidi snd-opl3-lib]
snd-hwdep               6304   0  [snd-opl3-lib]
snd                    41380   0  [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-mpu401-uart snd-rawmidi snd-opl3-lib snd-timer snd-seq-device snd-hwdep]
soundcore               6340   0  [snd]
nfsd                   75280   0  (autoclean)
af_packet              14856   1  (autoclean)
sr_mod                 19384   0  (autoclean)
floppy                 55932   0
softdog                 2888   1
tulip                  43968   1  (autoclean)
mod_quickcam          102912   0
videodev                7936   1  [mod_quickcam]
supermount             84032   4  (autoclean)
ide-cd                 33956   0
cdrom                  32608   0  [sr_mod ide-cd]
ide-scsi               11376   0
scsi_mod              106176   6  [scsimon usb-storage sd_mod sr_mod ide-scsi]
ehci-hcd               19212   0  (unused)
usb-uhci               25136   0  (unused)
usbcore                74988   1  [usb-storage mod_quickcam ehci-hcd usb-uhci]
rtc                     9004   0  (autoclean)
ext3                   60048   2
jbd                    39264   2  [ext3]

/var/log/messages ser således ud:
Feb 12 00:21:11 localhost kernel: hub.c: new USB device 00:10.2-1, assigned address 2
Feb 12 00:21:11 localhost kernel: usb.c: USB device 2 (vend/prod 0xd96/0x410a) is not claimed by any active driver.
Feb 12 00:21:14 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product d96/410a/1
Feb 12 00:21:14 localhost kernel: Initializing USB Mass Storage driver...
Feb 12 00:21:14 localhost kernel: usb.c: registered new driver usb-storage
Feb 12 00:21:14 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 1700
Feb 12 00:21:14 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices
feb 12 00:21:44 localhost su(pam_unix)[2961]: session opened for user root by ulrich(uid=501)
Feb 12 00:22:04 localhost kernel: usb.c: USB disconnect on device 00:10.2-1 address 2
Feb 12 00:22:04 localhost kernel: hub.c: new USB device 00:10.2-1, assigned address 3
Feb 12 00:22:09 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1488
Feb 12 00:22:09 localhost kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 0 lun 0
Feb 12 00:22:09 localhost kernel: USB Mass Storage support registered.
Feb 12 00:22:09 localhost /etc/hotplug/usb.agent: Module setup usb-storage for USB product d96/410a/1
Feb 12 00:22:09 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Feb 12 00:22:09 localhost /etc/hotplug/usb/usb-storage: Load scsimon
Feb 12 00:22:09 localhost /etc/hotplug/usb/usb-storage: loading ... scsimon
Feb 12 00:22:09 localhost kernel: resize_dma_pool: unknown device type -1
Feb 12 00:22:09 localhost /etc/hotplug/scsi.agent: sr_mod allready loaded
Feb 12 00:22:09 localhost /etc/hotplug/scsi.agent: Unknown type: -1
Feb 12 00:23:04 localhost kernel: usb-storage: host_reset() requested but not implemented
Feb 12 00:23:14 localhost kernel: scsi: device set offline - command error recover failed: host 2 channel 0 id 0 lun 0
Feb 12 00:23:17 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product d96/410a/1


Håber at der er nogen der kan hjælpe....

/UlrichHej

Jeg har prøvet at mounte op til /dev/sdh1.... Still no bell.

Min lsmod ser således ud:
Module                  Size  Used by    Not tainted
vfat                   11820   0  (autoclean)
fat                    38040   0  (autoclean) [vfat]
scsimon                 9312   0  (unused)
usb-storage            91616   0  (unused)
sd_mod                 13804   0  (autoclean) (unused)
lp                      8160   0
parport_pc             25544   1
parport                34472   1  [lp parport_pc]
snd-seq-midi            5056   0  (autoclean) (unused)
snd-opl3-synth         12680   0  (autoclean) (unused)
snd-seq-instr           7204   0  (autoclean) [snd-opl3-synth]
snd-seq-midi-emul       6924   0  (autoclean) [snd-opl3-synth]
snd-ainstr-fm           2928   0  (autoclean) [snd-opl3-synth]
snd-seq-oss            32000   0  (unused)
snd-seq-midi-event      6080   0  [snd-seq-midi snd-seq-oss]
snd-seq                42544   2  [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-midi-emul snd-seq-oss snd-seq-midi-event]
snd-pcm-oss            43652   0
snd-mixer-oss          14200   1  [snd-pcm-oss]
snd-cmipci             23800   1
snd-pcm                79588   0  [snd-pcm-oss snd-cmipci]
snd-page-alloc          9044   0  [snd-pcm]
snd-mpu401-uart         4704   0  [snd-cmipci]
snd-rawmidi            17760   0  [snd-seq-midi snd-mpu401-uart]
snd-opl3-lib            8004   0  [snd-opl3-synth snd-cmipci]
snd-timer              18436   0  [snd-seq snd-pcm snd-opl3-lib]
snd-seq-device          5832   0  [snd-seq-midi snd-opl3-synth snd-seq-oss snd-seq snd-rawmidi snd-opl3-lib]
snd-hwdep               6304   0  [snd-opl3-lib]
snd                    41380   0  [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-mpu401-uart snd-rawmidi snd-opl3-lib snd-timer snd-seq-device snd-hwdep]
soundcore               6340   0  [snd]
nfsd                   75280   0  (autoclean)
af_packet              14856   1  (autoclean)
sr_mod                 19384   0  (autoclean)
floppy                 55932   0
softdog                 2888   1
tulip                  43968   1  (autoclean)
mod_quickcam          102912   0
videodev                7936   1  [mod_quickcam]
supermount             84032   4  (autoclean)
ide-cd                 33956   0
cdrom                  32608   0  [sr_mod ide-cd]
ide-scsi               11376   0
scsi_mod              106176   6  [scsimon usb-storage sd_mod sr_mod ide-scsi]
ehci-hcd               19212   0  (unused)
usb-uhci               25136   0  (unused)
usbcore                74988   1  [usb-storage mod_quickcam ehci-hcd usb-uhci]
rtc                     9004   0  (autoclean)
ext3                   60048   2
jbd                    39264   2  [ext3]

/var/log/messages ser således ud:
Feb 12 00:21:11 localhost kernel: hub.c: new USB device 00:10.2-1, assigned address 2
Feb 12 00:21:11 localhost kernel: usb.c: USB device 2 (vend/prod 0xd96/0x410a) is not claimed by any active driver.
Feb 12 00:21:14 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product d96/410a/1
Feb 12 00:21:14 localhost kernel: Initializing USB Mass Storage driver...
Feb 12 00:21:14 localhost kernel: usb.c: registered new driver usb-storage
Feb 12 00:21:14 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 1700
Feb 12 00:21:14 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices
feb 12 00:21:44 localhost su(pam_unix)[2961]: session opened for user root by ulrich(uid=501)
Feb 12 00:22:04 localhost kernel: usb.c: USB disconnect on device 00:10.2-1 address 2
Feb 12 00:22:04 localhost kernel: hub.c: new USB device 00:10.2-1, assigned address 3
Feb 12 00:22:09 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1488
Feb 12 00:22:09 localhost kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 0 lun 0
Feb 12 00:22:09 localhost kernel: USB Mass Storage support registered.
Feb 12 00:22:09 localhost /etc/hotplug/usb.agent: Module setup usb-storage for USB product d96/410a/1
Feb 12 00:22:09 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Feb 12 00:22:09 localhost /etc/hotplug/usb/usb-storage: Load scsimon
Feb 12 00:22:09 localhost /etc/hotplug/usb/usb-storage: loading ... scsimon
Feb 12 00:22:09 localhost kernel: resize_dma_pool: unknown device type -1
Feb 12 00:22:09 localhost /etc/hotplug/scsi.agent: sr_mod allready loaded
Feb 12 00:22:09 localhost /etc/hotplug/scsi.agent: Unknown type: -1
Feb 12 00:23:04 localhost kernel: usb-storage: host_reset() requested but not implemented
Feb 12 00:23:14 localhost kernel: scsi: device set offline - command error recover failed: host 2 channel 0 id 0 lun 0
Feb 12 00:23:17 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product d96/410a/1


Håber at der er nogen der kan hjælpe....

/Ulrich


References