sslug-teknik team mailing list archive

[Robert Larsen <rcl@xxxxxxxxxx>]

Hej

Jeg sendte følgende til sslug-grafik i går morges men fik intet svar. 
Jeg håber lidt at der er nogen her som kan hjælpe i stedet for.

Robert Larsen wrote:

> Hej alle
>
> Jeg har i en måned kæmpet med mit nye grafikkort uden held.
> Jeg har prøvet at følge instruktionerne på ATI's hjemmeside og kom da 
> også op i opløsning med dem men "glxinfo | grep OpenGL" siger at det 
> er Mesa som renderer.
> Da jeg bruger Debian har jeg også prøvet at følge instruktionerne på 
> http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html
>
> Men med samme resultat og det er ved at drive mig til vanvid.
>
> Lidt info:
> robert@codemachine:~$ dpkg -l|grep fglrx
> rc  fglrx          4.3.0-4.11     XFree86 display driver for the ATI 
> graphics
> ii  fglrx-4.3.0-dr 3.12.0-2       Video driver for the ATI graphics 
> accelerato
> ii  fglrx-4.3.0-ke 3.12.0-2+10.00 ATI binary kernel module for Linux 
> 2.4.26-fl
> ii  fglrx-4.3.0-ke 3.12.0-2       Kernel module source for the ATI 
> graphics ac
> robert@codemachine:~$ glxinfo | grep OpenGL
> OpenGL vendor string: Mesa project: www.mesa3d.org
> OpenGL renderer string: Mesa GLX Indirect
> OpenGL version string: 1.3 Mesa 4.0.4
> OpenGL extensions:
> robert@codemachine:~$ lsmod|grep fglrx
> fglrx                 180200   0
>
> Jeg brugte fglrxconfig til at konfigurere X og så har jeg prøvet at 
> ændre forskellige indstillinger.
> Lige nu ser de relevante dele af XF86Config-4 således ud:
> Section "Module"
> # This loads the DBE extension module.
>  Load        "dbe"   # Double buffer extension
> # This loads the miscellaneous extensions module, and disables
> # initialisation of the XFree86-DGA extension within that module.
>  SubSection  "extmod"
>    Option    "omit xfree86-dga"   # don't initialise the DGA extension
>  EndSubSection
> # This loads the Type1 and FreeType font modules
>  Load        "type1"
>  Load        "freetype"
> # This loads the GLX module
>  Load        "glx"   # libglx.a
>  Load        "dri"   # libdri.a
> EndSection
>
> Section "Device"
>  Identifier                          "ATI Graphics Adapter"
>  Driver                              "fglrx"
> # ### generic DRI settings ###
> # === disable PnP Monitor  ===
>  #Option                              "NoDDC"
> # === disable/enable XAA/DRI ===
>  Option "no_accel"                   "no"
>  Option "no_dri"                     "no"
> # === misc DRI settings ===
>  Option "mtrr"                       "off" # disable DRI mtrr mapper, 
> driver has its own code for mtrr
> # ### FireGL DDX driver module specific settings ###
> # === Screen Management ===
>  Option "DesktopSetup"               "0x00000000"
>  Option "MonitorLayout"              "AUTO, AUTO"
>  Option "IgnoreEDID"                 "off"
>  Option "HSync2"                     "unspecified"
>  Option "VRefresh2"                  "unspecified"
>  Option "ScreenOverlap"              "0"
> # === TV-out Management ===
>  Option "NoTV"                       "no"
>  Option "TVStandard"                 "PAL-B"
>  Option "TVHSizeAdj"                 "0"
>  Option "TVVSizeAdj"                 "0"
>  Option "TVHPosAdj"                  "0"
>  Option "TVVPosAdj"                  "0"
>  Option "TVHStartAdj"                "0"
>  Option "TVColorAdj"                 "0"
>  Option "GammaCorrectionI"           "0x00000000"
>  Option "GammaCorrectionII"          "0x00000000"
> # === OpenGL specific profiles/settings ===
>  Option "Capabilities"               "0x00000000"
> # === Video Overlay for the Xv extension ===
>  Option "VideoOverlay"               "on"
> # === OpenGL Overlay ===
> # Note: When OpenGL Overlay is enabled, Video Overlay
> #       will be disabled automatically
>  Option "OpenGLOverlay"              "off"
> # === Center Mode (Laptops only) ===
>  Option "CenterMode"                 "off"
> # === Pseudo Color Visuals (8-bit visuals) ===
>  Option "PseudoColorVisuals"         "off"
> # === QBS Management ===
>  Option "Stereo"                     "off"
>  Option "StereoSyncEnable"           "1"
> # === FSAA Management ===
>  Option "FSAAEnable"                 "no"
>  Option "FSAAScale"                  "1"
>  Option "FSAADisableGamma"           "no"
>  Option "FSAACustomizeMSPos"         "no"
>  Option "FSAAMSPosX0"                "0.000000"
>  Option "FSAAMSPosY0"                "0.000000"
>  Option "FSAAMSPosX1"                "0.000000"
>  Option "FSAAMSPosY1"                "0.000000"
>  Option "FSAAMSPosX2"                "0.000000"
>  Option "FSAAMSPosY2"                "0.000000"
>  Option "FSAAMSPosX3"                "0.000000"
>  Option "FSAAMSPosY3"                "0.000000"
>  Option "FSAAMSPosX4"                "0.000000"
>  Option "FSAAMSPosY4"                "0.000000"
>  Option "FSAAMSPosX5"                "0.000000"
>  Option "FSAAMSPosY5"                "0.000000"
> # === Misc Options ===
>  Option "UseFastTLS"                 "0"
>  Option "BlockSignalsOnLock"         "on"
>  Option "UseInternalAGPGART"         "yes"
>  Option "ForceGenericCPU"            "no"
>  BusID "PCI:2:0:0"    # vendor=1002, device=4150
>  Screen 0
> EndSection
>
> Section "Screen"
>  Identifier  "Screen0"
>  Device      "ATI Graphics Adapter"
>  Monitor     "Monitor0"
>  DefaultDepth 24
>  #Option "backingstore"
>
>  Subsection "Display"
>      Depth       24
>      Modes       "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600"
>      ViewPort    0 0  # initial origin if mode is smaller than desktop
> #        Virtual     1280 1024
>  EndSubsection
> EndSection
>
> UseInternalAGPGART var sat til "no" på 
> http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html 
> og det har jeg også prøvet men der stod at hvis OpenGL rendering ikke 
> virkede så kunne man prøve at sætte den til "yes".
>
> Hvad gør jeg galt ?
>
> VH
> Robert