sslug-teknik team mailing list archive

[Jan Kirk <jankirk@xxxxxxxx>]

>> Her er det sidste output fra opstarten
>> ---------------------------------------------------------------------
>> ------ Ext-fs: INFO: recovery required on readonly filesystem.
>> Ext-fs: Write access will be enabled during recovery.
>> hda: dma_intr: status=0x51 {DriveReady SeekComplete Error}
>> hda: dma_intr: error=0x40 {UncorrectableError}, LBAsect=1285264,
>> sector=64 end_request: I/O error, dev 03:03 (hda), sector 64
>> Ext3-fserror (device ide0(3,3)): ext3_get_inode_loc: unable to read
>> inode block - inode=8, block=8 Ext3-fs: invalid journal inode.
>> Ext2-fs: ide0(3,3): Coulden't mount because of unsupported optional
>> features (4). Fat: bogus logical sectorsize 0
>> hda: dma_intr: status=0x51 {DriveReady SeekComplete Error}
>> hda: dma_intr: error=0x40 {UncorrectableError}, LBAsect=1285264,
>> sector=64 end_request: I/O error, dev 03:03 (hda), sector 64
>> isofs_read_super: bread failed, dev=03:03, iso_blknum=16,block=32
>> kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno=2
>> kernel panic: vfs: Unable to mount root fs on 03:03
>> ---------------------------------------------------------------------


>Den kan tydeligvis ikke finde din roddisk, altså /

>Ummidelbart ser det ud til at din disk er død. Hvad står der tidligere i
>opstarten, omkring hda og IDE devices ?

Her er output fra dmesg (kørt på knoppix):
========================================================
root@ttyp0[knoppix]# dmesg
.02 loaded.
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 781k freed
VFS: Mounted root (ext2 filesystem).
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: TOSHIBA   Model: DVD-ROM SD-M1612  Rev: 1004
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
GDT: Storage RAID Controller Driver. Version: 2.05
GDT: Found 0 PCI Storage RAID Controllers
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
Guestimating sector 160085503 for superblock
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array 
found
Medley RAID: No usable RAID sets found
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:50:50 Aug  9 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
blk: queue c03661a0, I/O limit 4095Mb (mask 0xffffffff)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.01
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 29596 blocks, 65536 bytes/block, largest block 
is 65562 bytes.
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 144k freed
Real Time Clock Driver v1.10f
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1, 2 throttling states)
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usbdevfs: remount parameter error
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
eth0: DC21143 at 0xe000 (PCI bus 0, device 8), h/w address 00:40:c7:97:73:8d,
eth0: Using generic MII device control. If the board doesn't operate,
please mail the following dump to the author:

MII device address: 1
MII CR:  3100
MII SR:  7809
MII ID0: 181
MII ID1: b802
MII ANA: 5e1
MII ANC: 0
MII 16:  640
MII 17:  f010
MII 18:  6800

      and requires IRQ11 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@xxxxxxxxxxxxxxxxxxx
eth1: DC21143 at 0xe400 (PCI bus 0, device 9), h/w address 00:40:c7:97:5f:2a,
eth1: Using generic MII device control. If the board doesn't operate,
please mail the following dump to the author:

MII device address: 1
MII CR:  3100
MII SR:  7809
MII ID0: 181
MII ID1: b802
MII ANA: 5e1
MII ANC: 0
MII 16:  640
MII 17:  f010
MII 18:  6800

      and requires IRQ10 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@xxxxxxxxxxxxxxxxxxx
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected AMD 761 chipset
agpgart: AGP aperture is 32M @ 0xf8000000
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=0
end_request: I/O error, dev 03:03 (hda), sector 0
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=2
end_request: I/O error, dev 03:03 (hda), sector 2
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=4
end_request: I/O error, dev 03:03 (hda), sector 4
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=6
end_request: I/O error, dev 03:03 (hda), sector 6
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=8
end_request: I/O error, dev 03:03 (hda), sector 8
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=10
end_request: I/O error, dev 03:03 (hda), sector 10
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=12
end_request: I/O error, dev 03:03 (hda), sector 12
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=14
end_request: I/O error, dev 03:03 (hda), sector 14
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=16
end_request: I/O error, dev 03:03 (hda), sector 16
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=18
end_request: I/O error, dev 03:03 (hda), sector 18
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=20
end_request: I/O error, dev 03:03 (hda), sector 20
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=22
end_request: I/O error, dev 03:03 (hda), sector 22
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=24
end_request: I/O error, dev 03:03 (hda), sector 24
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=26
end_request: I/O error, dev 03:03 (hda), sector 26
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=28
end_request: I/O error, dev 03:03 (hda), sector 28
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=30
end_request: I/O error, dev 03:03 (hda), sector 30
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=32
end_request: I/O error, dev 03:03 (hda), sector 32
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=34
end_request: I/O error, dev 03:03 (hda), sector 34
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=36
end_request: I/O error, dev 03:03 (hda), sector 36
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=38
end_request: I/O error, dev 03:03 (hda), sector 38
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=40
end_request: I/O error, dev 03:03 (hda), sector 40
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=42
end_request: I/O error, dev 03:03 (hda), sector 42
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=44
end_request: I/O error, dev 03:03 (hda), sector 44
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=46
end_request: I/O error, dev 03:03 (hda), sector 46
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=48
end_request: I/O error, dev 03:03 (hda), sector 48
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=50
end_request: I/O error, dev 03:03 (hda), sector 50
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=52
end_request: I/O error, dev 03:03 (hda), sector 52
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=54
end_request: I/O error, dev 03:03 (hda), sector 54
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=56
end_request: I/O error, dev 03:03 (hda), sector 56
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=58
end_request: I/O error, dev 03:03 (hda), sector 58
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=60
end_request: I/O error, dev 03:03 (hda), sector 60
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=62
end_request: I/O error, dev 03:03 (hda), sector 62
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=64
end_request: I/O error, dev 03:03 (hda), sector 64
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=0
end_request: I/O error, dev 03:04 (hda), sector 0
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=2
end_request: I/O error, dev 03:04 (hda), sector 2
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=4
end_request: I/O error, dev 03:04 (hda), sector 4
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=6
end_request: I/O error, dev 03:04 (hda), sector 6
spurious 8259A interrupt: IRQ7.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=8
end_request: I/O error, dev 03:04 (hda), sector 8
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=10
end_request: I/O error, dev 03:04 (hda), sector 10
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=12
end_request: I/O error, dev 03:04 (hda), sector 12
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=14
end_request: I/O error, dev 03:04 (hda), sector 14
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=16
end_request: I/O error, dev 03:04 (hda), sector 16
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=18
end_request: I/O error, dev 03:04 (hda), sector 18
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=20
end_request: I/O error, dev 03:04 (hda), sector 20
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=22
end_request: I/O error, dev 03:04 (hda), sector 22
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=24
end_request: I/O error, dev 03:04 (hda), sector 24
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=26
end_request: I/O error, dev 03:04 (hda), sector 26
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=28
end_request: I/O error, dev 03:04 (hda), sector 28
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=30
end_request: I/O error, dev 03:04 (hda), sector 30
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=32
end_request: I/O error, dev 03:04 (hda), sector 32
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974568, sector=34
end_request: I/O error, dev 03:04 (hda), sector 34
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974568, sector=36
end_request: I/O error, dev 03:04 (hda), sector 36
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974568, sector=38
end_request: I/O error, dev 03:04 (hda), sector 38
Adding Swap: 530136k swap-space (priority -1)
eth0: media is 100Mb/s.
eth0: media is 100Mb/s.
eth1: media is TP.
eth1: media is unconnected, link down or incompatible connection.
eth1: media is TP.
eth1: media is unconnected, link down or incompatible connection.
eth1: media is TP.
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1285264, sector=64
end_request: I/O error, dev 03:03 (hda), sector 64
EXT3-fs error (device ide0(3,3)): ext3_get_inode_loc: unable to read inode 
block - inode=8, block=8
EXT3-fs: invalid journal inode.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=143974563, sector=32
end_request: I/O error, dev 03:04 (hda), sector 32
EXT3-fs error (device ide0(3,4)): ext3_get_inode_loc: unable to read inode 
block - inode=8, block=4
EXT3-fs: invalid journal inode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
========================================================

>> eller at der er en der har været inde at "lege" på maskinen.

>Det _tror_ jeg ikke, men man kan aldrig vide. Fysiske fejl på hardware
>er svære at lave for en hacker.

>> Jeg har leget lidt med rescue fra boot cd'en, brugte:
>> rescbf24 root=/dev/hda3 init=/bin/bash
>> men det giver stadig en panic.

>Jeg bruger tit en Knoppix til at finde og reparere fejl med.

Jeg fik lavet en KNOPPIX cd.

>> Hvis jeg går ind i installationen kan jeg godt se alle mine partioner:
>> /dev/hda1     /boot
>> /dev/hda2     swap
>> /dev/hda3     /
>> /dev/hda4    (misc backup, men ikke alle vigtige data)
>> men hvis jeg forsøger at mounte /dev/hda3 skriver den: No such device

>Igen, står der ikke noget om hda i kernebeskederne, dem du får hvis du
>kører kommandoen dmesg ?

Kørte dmesg fra knoppix se ovenfor.

>> ps !  Jeg har en ekstra disk, så som sidste udvej havde jeg tænkt mig
>> at benytte den til at lave en frisk 
>>        installation, og så redde dataene fra den gamle disk (hvis
>>        muligt (har ikke prøvet det før)) fra et fungerende system.

>Jeg ville starte med at se på hvilke måder man kan snakke med disken på,
>om det er filsystemet der er smadret, eller hvad der er galt. Og til det
>ville jeg bruge en Knoppix. Der har du nemlig alle de værktøjer der skal
>til. e2fsck og fdisk blandt andet, måske og badblocks programmet.

Jeg prøvede at køre:
--------------------------------------------------------------------------
skulle køre readonly med badblockcheck (-n og -c option), og angivelse
af alternativ superblock, samt blockstørrelse (-b og -B option)
--------------------------------------------------------------------------
root@ttyp0[knoppix]# e2fsck -n -c -b 8193 -B 1024 -C 0 /dev/hda1
e2fsck 1.35 (28-Feb-2004)
Checking for bad blocks (read-only test): done
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information

/dev/hda1: ***** FILE SYSTEM WAS MODIFIED *****
/dev/hda1: 26/26208 files (3.8% non-contiguous), 10879/104422 blocks
-----------------------------------------------------------------------------
Da jeg startede knoppix viste det sig at de to små partioner :
/dev/hda1       /boot
/dev/hda2       (swap)
var ok, så denne test var som 'ventet'

Værre er det med de vigtige partioner:
/dev/hda3     /
/dev/hda4    (backup)
Her fik jeg:
---------------------------------------------------------------------------
root@ttyp0[knoppix]# e2fsck -n -c -b 8193 -B 1024 -C 0 /dev/hda3
e2fsck 1.35 (28-Feb-2004)
e2fsck: Bad magic number in super-block while trying to open /dev/hda3

The superblock could not be read or does not describe a correct ext2
filesystem.  If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
---------------------------------------------------------------------------
Og uden angivelse af alternativ superblock:
-------------------------------------------------------------------
root@ttyp0[knoppix]# e2fsck -n -c -B 1024 -C 0 /dev/hda3
e2fsck 1.35 (28-Feb-2004)
e2fsck: Attempt to read block from filesystem resulted in short read while 
trying to open /dev/hda3
Could this be a zero-length partition?
--------------------------------------------------------------------

Hvis jeg prøver at køre badblocks alene på feks /dev/hda3 med:
root@ttyp1[knoppix]# badblocks -n -s  /dev/hda3
- Så er der mange badblocks, men feks 8193 som skulle være en alternativ
  superblock var tilsyneladende ikke bad,
  hvorfor ville e2fsck så ikke acceptere denne ?

I 'man e2fsck' står der:
------------------------------------------------------------------------
Additional backup superblocks can be determined by using the  mke2fs  program  
using  the  -n option  to  print  out  where  the superblocks were created.   
The -b option to mke2fs, which specifies blocksize of the filesystem must be 
specified in order for the superblock locations that are printed out to be 
accurate.
------------------------------------------------------------------------
- Vil det sige at der er andre superblocks som jeg kan prøve at angive ?
- Jeg kunne ikke se oplysninger om andre superblocks når jeg kørte
  e2fsck med -n option på /dev/hda1 ?


- Er der nogen der kan hjælpe mig videre, hvad skal jeg prøve nu ?
- Sådan som jeg har forstået det så er jeg lost hvis e2fsck ikke kan finde
  en brugbar superblock for så kan den ikke rette fejl.
- Er der evt andre værktøjer jeg kan bruge ?



>Hvis det viser sig at data kan læses, var det måske en god ide at
>installere på en anden disk,og så hive data ind fra den gamle disk.

>Mvh. Jesper (Og god kamp)