sslug-teknik team mailing list archive

[Jens Bang <mailinglists@xxxxxxx>]

Jeg har problemer med at brænde en musik-CD under kerne 2.6.10 (FC2). Jeg har 
genereret 2 tracks (hver på ca. 30 min) fra en musik CD, som jeg vil brænde 
på en tom CD. Men det vil cdrecord ikke (har også prøvet med k3b, men det 
virker heller ikke). Det ser godt nok ud som om det virker, men man kan altså 
endnu ikke brænde ca. 1 times musik på 37 sek.  :-)

Det skal nævnes at det er et IDE drev jeg brænder med, hvilket vist nok giver 
nogle problemer under kerne 2.6.10, fordi der er noget der er ændret. Jeg har 
hørt noget med at man måske skal bruge en patch til cdrecord, men har ikke 
kunnet finde denne patch.

Jeg får dette output fra cdrecord:

[root@localhost hhgttg1]# cdrecord speed=16 track01.cdda.wav track02.cdda.wav
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent 
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg 
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to 
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this 
version.
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - 
Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c      1.83 04/05/20 
Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PLEXTOR '
Identifikation : 'CD-R   PX-W4012A'
Revision       : '1.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION 
HIDECDR
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Turning forcespeed off
resid: 8
Speed set to 2822 KB/s
Starting to write CD/DVD at speed  16.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
trackno=0
Turning BURN-Free on
cdrecord: Success. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 38.007s timeout 60s
cdrecord: OPC failed.
resid: 4

-- 

        |\     _,,,---,,_       Greetings, Jens
 ZZZzz /,`.-'`'    -.  ;-;;,_
      |,4-  ) )-,_. ,\ (  `'-'  jens@xxxxxxx
     '---''(_/--'  `-'\_)
----------------------------------------------------
Anyone can hold the helm when the sea is calm.
                                                     -- Publilius Syrus