sslug-teknik team mailing list archive

[Jens Bang <mailinglists@xxxxxxx>]

On Monday 14 March 2005 17:17, Jesper Krogh wrote:
> >  [root@localhost cdimages]# cdrecord dev=/dev/cdrom:1,0,0 datatestcd.iso
>
> Prøv med:
> driveropts=burnproof

Det virkede heller ikke:

[root@localhost cdimages]# cdrecord driveropts=burnproof dev=/dev/cdrom:1,0,0 
datatestcd.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent 
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg 
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to 
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this 
version.
scsidev: '/dev/cdrom:1,0,0'
devname: '/dev/cdrom'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - 
Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c      1.83 04/05/20 
Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PLEXTOR '
Identifikation : 'CD-R   PX-W4012A'
Revision       : '1.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION 
HIDECDR
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Turning forcespeed off
resid: 8
Speed set to 7056 KB/s
Starting to write CD/DVD at speed  40.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
trackno=0
cdrecord: Success. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 38.321s timeout 60s
cdrecord: OPC failed.
resid: 4

-- 

        |\     _,,,---,,_       Greetings, Jens
 ZZZzz /,`.-'`'    -.  ;-;;,_
      |,4-  ) )-,_. ,\ (  `'-'  jens@xxxxxxx
     '---''(_/--'  `-'\_)
----------------------------------------------------
software piracy: stealing a ship's program