sslug-teknik team mailing list archive

[Ivar Madsen <spam.sslug.news@xxxxxxxx>]

Ivar Madsen wrote:

> Hmm, den er helt kold at følge på. Jeg må kunne installere noget til at
> kunne få udlæst temp. og sådan noget fra bundkkortes følere, hvad er det
> nu den slags soft hedder?

lm_sensors er det.

,----[ sensors-detect output ]
| I will now generate the commands needed to load the I2C modules.
|  Sometimes, a chip is available both through the ISA bus and an I2C bus.
|  ISA bus access is faster, but you need to load an additional driver
module
|  for it. If you have the choice, do you want to use the ISA bus or the
|  I2C/SMBus (ISA/smbus)?
| 
| To make the sensors modules behave correctly, add these lines to
| /etc/modules.conf:
| 
| #----cut here----
| # I2C module options
| alias char-major-89 i2c-dev
| #----cut here----

Det kan jeg finde udaf, men


| To load everything that is needed, add this to some /etc/rc* file:

Hvilken en skal jeg lægge det i?

| #----cut here----
| # I2C adapter drivers
| modprobe i2c-piix4
| modprobe i2c-isa
| # I2C chip drivers
| modprobe eeprom
| modprobe bmcsensors
| # sleep 2 # optional
| /usr/local/bin/sensors -s # recommended
| #----cut here----
| 
| WARNING! If you have some things built into your kernel, the list above
| will contain too many modules. Skip the appropriate ones! You really
should
| try these commands right now to make sure everything is working properly.
| Monitoring programs won't work until it's done.
`----




-- 
Med venlig hilsen
Ivar Madsen
Hjælp til med at få overblik over CC's ADSL priser på
http://milli.dk/index.php/CC_ADSL_priser
--------------------------------------------------------------------------------