sslug-teknik team mailing list archive

[Atte André Jensen <atte@xxxxxxxxxxxxxx>]

Mogens Kjaer wrote:

> Kan du så ikke bare bruge cdrecord i stedet for cdrdao?
>
> cdrecord ... cuefile=transformers_1.svcd.cue

Åbenbart ikke. Den slutter af med den glimrende opfordring "Please 
properly read the error message above". Problemet er jo bare at

atte@ajstrup:~/tmp/dvdrip/transformers/avi/001$ cdrecord -dao 
cuefile=transforme 

rs_1.svcd.cue
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 
Joerg Schi 

lling
NOTE: this version of cdrecord is an inofficial (modified) release of 
cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to 
<cdrtools@packages.debian. 

org>.
      The original author should not be bothered with problems of this 
version.

cdrecord: Warning: Running on Linux-2.6.15-26-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/cdrw'
devname: '/dev/cdrw'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'debian-0.8debian2'.
cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 
'@(#)sc 

sitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4242N'
Revision       : '0201'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD at speed 24 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Turning BURN-Free off
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.002s timeout 200s
write track pad data: error after 0 bytes
BFree: 1605 K BSize: 1605 K
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.004s timeout 200s
write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.

--
peace, love & harmony
Atte