sslug-teknik team mailing list archive

[john@xxxxxxxxxxxxxxx]

Jeg byggede på denne svar fra linuxquestions.org m.h.t. opsætningen af
/etc/wvdial.conf:

[Dialer cingular]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyUSB0
Username = ISP@xxxxxxxxxxxxxxxx
Password = CINGULAR1
Phone = *99***1#
Stupid Mode = 1
Init3 = AT+CGDCONT=1,"IP","isp.cingular"
Dial Attempts = 3

Dette kan ikke være helt forkert.

Har ændret lidt selvfølgelig:

[Dialer 3]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyUSB0
Username = 3
Password = 3
Phone = *99#
Stupid Mode = 1
Init3 = AT+CGDCONT=1,"IP","3.dk"
Dial Attempts = 3


Jeg henter dette ud af /var/log/messages:

pppd 2.4.4 started by root, uid 0
Aug 31 01:06:05 JVPLaptop pppd[6089]: Using interface ppp0
Aug 31 01:06:05 JVPLaptop pppd[6089]: Connect: ppp0 <--> /dev/ttyUSB0
Aug 31 01:06:05 JVPLaptop pppd[6089]: CHAP authentication succeeded
Aug 31 01:06:05 JVPLaptop pppd[6089]: CHAP authentication succeeded
Aug 31 01:06:07 JVPLaptop pppd[6089]: Modem hangup
Aug 31 01:06:07 JVPLaptop pppd[6089]: Connection terminated.
Aug 31 01:06:07 JVPLaptop pppd[6089]: Exit.

Hvad er forkert?

Mvh.

John Poulsen