sslug-teknik team mailing list archive

[info@xxxxxxxxxxxxx (Per Jørgensen)]

Frank Vestergaard Pedersen skrev:
> Hej Per

> Jeg tro ikke at dit problem ligger i din firewall (jeg har ikke nærlæst 
> scriptet) men i din routning!
> vil du ikke lige sende outputtet af en "ifconfig" og en "netstat -n"

> /Frank
Hej Frank. 
Jeg tror vist nok et eller andet sted du har ret i dette omkring 
routningen.
Her er min ifconfig:
ifconfig
eth0      Link encap:Ethernet  HWaddr 00:00:24:C6:A0:FC
         inet addr:83.95.44.14  Bcast:83.255.255.255  Mask:255.255.255.252
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:7045382 errors:0 dropped:0 overruns:0 frame:0
         TX packets:7956285 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:4209354623 (3.9 GiB)  TX bytes:2716253344 (2.5 GiB)
         Interrupt:10 Base address:0x9000

eth0:0    Link encap:Ethernet  HWaddr 00:00:24:C6:A0:FC
         inet addr:87.50.193.217  Bcast:87.255.255.255  
Mask:255.255.255.252
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         Interrupt:10 Base address:0x9000

eth1      Link encap:Ethernet  HWaddr 00:00:24:C6:A0:FD
         inet addr:172.16.0.1  Bcast:172.16.0.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:5720299 errors:0 dropped:2067 overruns:185 frame:0
         TX packets:5063988 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:3865147047 (3.5 GiB)  TX bytes:3439924330 (3.2 GiB)
         Interrupt:10 Base address:0xd000

eth2      Link encap:Ethernet  HWaddr 00:00:24:C6:A0:FE
         inet addr:172.16.10.1  Bcast:172.16.10.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:2904336 errors:0 dropped:0 overruns:0 frame:0
         TX packets:2212159 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:3593546398 (3.3 GiB)  TX bytes:642418482 (612.6 MiB)
         Interrupt:10 Base address:0xf000

eth3      Link encap:Ethernet  HWaddr 00:00:24:C6:2E:BC
         inet addr:172.16.20.1  Bcast:172.16.20.255  Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:312394 errors:0 dropped:9695 overruns:833 frame:0
         TX packets:419415 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:23294111 (22.2 MiB)  TX bytes:573871127 (547.2 MiB)
         Interrupt:5 Base address:0x1000

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:7639 errors:0 dropped:0 overruns:0 frame:0
         TX packets:7639 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:389481 (380.3 KiB)  TX bytes:389481 (380.3 KiB)

Og netstat -n:
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 172.16.0.1:22           172.16.0.12:58572       
ESTABLISHED
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags       Type       State         I-Node Path
unix  8      [ ]         DGRAM                    1466     /dev/log
unix  2      [ ]         DGRAM                    799400
unix  3      [ ]         STREAM     CONNECTED     799399
unix  3      [ ]         STREAM     CONNECTED     799398
unix  2      [ ]         DGRAM                    557765
unix  2      [ ]         DGRAM                    482633
unix  2      [ ]         DGRAM                    355529
unix  2      [ ]         DGRAM                    1802
unix  2      [ ]         DGRAM                    1507

og så en route:route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
83.95.44.12     *               255.255.255.252 U     0      0        0 
eth0
87.50.193.216   *               255.255.255.252 U     0      0        0 
eth0
172.16.20.0     *               255.255.255.0   U     0      0        0 
eth3
172.16.0.0      *               255.255.255.0   U     0      0        0 
eth1
172.16.10.0     *               255.255.255.0   U     0      0        0 
eth2
default         atm2-0-10470.na 0.0.0.0         UG    0      0        0 
eth0

Nu har jeg så aldrig brugt route før i min tid med Linux, så jeg håber da 
lidt at du evt kunne forklare lidt dybere omkring hvad der lige skal gøre 
her