← Back to team overview

sslug-teknik team mailing list archive

Re: ethtool og trigon3

 

On Tue, November 27, 2007 20:31, Doc Nielsen wrote:
> On Nov 27, 2007 4:02 PM, Mogens Melander <mogens@xxxxxxxxxxxxx> wrote:
>> # ethtool eth0
>> Settings for eth0:
>>         Supported ports: [ MII ]
>
> mon ikke mii-diag og mii-tool kunne bruges på det kort?

Det er en anden ting google fortæller om. Stol ikke på mii-tool:

# mii-tool -v
eth0: negotiated, link ok
  product info: vendor 00:08:18, model 24 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
eth1: negotiated, link ok
  product info: vendor 00:08:18, model 24 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

Hmmm, har de ikke hørt om gigabit ?

-- 
Later

Mogens Melander
+45 40 85 71 38
+66 870 133 224



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



References