sslug-teknik team mailing list archive

[Peter Maersk-Moller <peter@xxxxxxxxxxxxxxxxx>]

Hej Jesper.

Jesper Krogh wrote:
> Mon ikke nærmere det skyldes at USB-drivere loades efter raid-systemet
> er startet op. 

Jo, det er vist det. Se nedenstaaende fra dmesg. Men hvordan kan man 
goere noget ved det ?

mvh.

Peter


IP-Config: Got DHCP answer from 192.168.1.45, my address is 192.168.1.22
IP-Config: Complete:
      device=eth0, addr=192.168.1.22, mask=255.255.255.0, gw=192.168.1.2,
     host=192.168.1.22, domain=optimalstream.net, nis-domain=(none),
     bootserver=192.168.1.45, rootserver=192.168.1.45, rootpath=
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hda6 ...
md:  adding hda6 ...
md: hda5 has different UUID to hda6
md: hda3 has different UUID to hda6
md: hda1 has different UUID to hda6
md: created md3
md: bind<hda6>
md: running: <hda6>
raid1: raid set md3 active with 1 out of 2 mirrors
md: considering hda5 ...
md:  adding hda5 ...
md: hda3 has different UUID to hda5
md: hda1 has different UUID to hda5
md: created md2
md: bind<hda5>
md: running: <hda5>
raid1: raid set md2 active with 1 out of 2 mirrors
md: considering hda3 ...
md:  adding hda3 ...
md: hda1 has different UUID to hda3
md: created md1
md: bind<hda3>
md: running: <hda3>
raid1: raid set md1 active with 1 out of 2 mirrors
md: considering hda1 ...
md:  adding hda1 ...
md: created md0
md: bind<hda1>
md: running: <hda1>
raid1: raid set md0 active with 1 out of 2 mirrors
md: ... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 228k freed
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
Adding 2008116k swap on /dev/hda2.  Priority:-1 extents:1 across:2008116k
scsi 2:0:0:0: Direct-Access     ST332082 0AS                   PQ: 0 
ANSI: 2 CCS
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
sda: assuming drive cache: write through
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 38 00 00
sda: assuming drive cache: write through
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 2:0:0:0: Attached scsi disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete