sslug-teknik team mailing list archive

[Mogens Kjaer <mk@xxxxxx>]

Doc Nielsen wrote:
> On Fri, Aug 29, 2008 at 10:31 AM, Mogens Kjaer <mk@xxxxxx> wrote:
>>> Når jeg "unmounter" dem under Fedora8 slukker lyset IKKE.
>> Hvordan kan en disk vide at den er unmounted?
> 
> Prøv med 'eject' ;)

Den unmounter bare. Lampen (på en USB memory dims) lyser stadigvæk.
På W2K slukker LED'en når man vælger safely remove hardware.

Jeg har også prøvet remove-single-device efter umount:

[root@mk mk]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: ST3250310AS      Rev: 3.AH
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: ATAPI    Model: DVD A  DH16A1L   Rev: KH3B
  Type:   CD-ROM                           ANSI  SCSI revision: 05
Host: scsi7 Channel: 00 Id: 00 Lun: 00
  Vendor: USB      Model: FLASH DISK       Rev: 0.00
  Type:   Direct-Access                    ANSI  SCSI revision: 02
[root@mk mk]# echo "scsi remove-single-device 7 0 0 0">/proc/scsi/scsi
[root@mk mk]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: ST3250310AS      Rev: 3.AH
  Type:   Direct-Access                    ANSI  SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: ATAPI    Model: DVD A  DH16A1L   Rev: KH3B
  Type:   CD-ROM                           ANSI  SCSI revision: 05

Men LED'en lyser endnu.

Mogens

-- 
Mogens Kjaer, Carlsberg A/S, Computer Department
Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark
Phone: +45 33 27 53 25, Fax: +45 33 27 47 08
Email: mk@xxxxxx Homepage: http://www.crc.dk