sslug-teknik team mailing list archive

[Peter Øgaard Meyland <peter@xxxxxxxxxx>]

Hejsa

Jeg har købet et DCF-77 ur fra Gude (http://www.gude.info) model 'Expert 
mouseCLOCK USB II <index.php?lng=0&section=products&product=emcusb>'

Uret virker perfekt under Windows, meeen jeg kan overhovedet ikke få det 
til at virke under Linux

Jeg har prøvet på en fuld opdateret Centos5.2 med en selvkompileret 
(--enableRAWDCF) samt Fedora 9 med ntpd version 4.2.4p4

Min ntp.conf omkring DCF-77 ser således ud:
   server 127.127.8.0 mode 19
   logfile /var/log/ntp
   logconfig =all

Og min udev regel ser således ud:
   KERNEL=="ttyUSB*", SYSFS{idProduct}=="e88a", SYMLINK+="refclock-%m"

Udev opdager uret når det tilsluttes, /dev/refclock-0 bliver oprettet

Men uanset hvad jeg gør får jeg nedenstående i ntp loggen:

7 Sep 11:57:13 ntpd[27995]: frequency initialized 60.134 PPM from 
/var/lib/ntp/drift
7 Sep 11:57:13 ntpd[27995]: system event 'event_restart' (0x01) status 
'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
7 Sep 11:57:15 ntpd[27995]: peer 90.184.101.171 event 'event_reach' 
(0x84) status 'unreach, conf, 1 event, event_reach' (0x8014)
7 Sep 11:57:16 ntpd[27995]: peer 217.157.183.54 event 'event_reach' 
(0x84) status 'unreach, conf, 1 event, event_reach' (0x8014)
7 Sep 11:57:17 ntpd[27995]: peer 130.225.92.237 event 'event_reach' 
(0x84) status 'unreach, conf, 1 event, event_reach' (0x8014)
7 Sep 11:57:27 ntpd[27995]: parse: convert_rawdcf: INCOMPLETE DATA - 
time code only has 2 bits

7 Sep 11:57:27 ntpd[27995]: PARSE receiver #0: conversion status 
"CONVERSION FAILED; DATE ILLEGAL"
7 Sep 11:57:27 ntpd[27995]: PARSE receiver #0: interval for following 
error message class is at least 00:01:00
7 Sep 11:57:27 ntpd[27995]: PARSE receiver #0: FAILED TIMECODE: "#" 
(check receiver configuration / wiring)
7 Sep 11:57:27 ntpd[27995]: clock GENERIC(0) event 'clk_baddate' (0x05)
7 Sep 11:57:27 ntpd[27995]: peer GENERIC(0) event 'event_peer_clock' 
(0x85) status 'unreach, conf, 1 event, event_peer_clock' (0x8015)
7 Sep 11:57:31 ntpd[27995]: parse: convert_rawdcf: INCOMPLETE DATA - 
time code only has 1 bits

7 Sep 11:57:31 ntpd[27995]: PARSE receiver #0: conversion status 
"CONVERSION FAILED; DATE ILLEGAL"
7 Sep 11:57:36 ntpd[27995]: parse: convert_rawdcf: INCOMPLETE DATA - 
time code only has 2 bits

og de sidste 2 linier gentages hele tiden :-(

Er her en eller anden venlig sjæl der kan hjælpe mig videre?

/Peter