tiomap-dev team mailing list archive
-
tiomap-dev team
-
Mailing list archive
-
Message #00683
[Bug 817282] Re: SGX deadlock with panda lt x11 hwpack
** Changed in: linaro-landing-team-ti
Importance: Undecided => Low
--
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to ubuntu-omap4-extras-graphics.
https://bugs.launchpad.net/bugs/817282
Title:
SGX deadlock with panda lt x11 hwpack
Status in Linaro Texas Instruments Landing Team:
New
Status in Linaro Ubuntu Evaluation Builds:
Confirmed
Status in Ubuntu OMAP4 graphics addons:
New
Bug description:
on panda, using the lt-x11 hwpack. LEB 11.07 RC rootfs
boot log:
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 3.0.0-1402-linaro-lt-omap (buildd@kaylaberry) (gcc version 4.5.2 (Ubuntu/Linaro)
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] Reserving 50331648 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
[ 0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to complete transition
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c202f000 s8160 r8192 d12320 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 233472
[ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=55f80ec9-c0a5-481a-a4c9-30
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 456MB 464MB = 920MB total
[ 0.000000] Memory: 916132k/916132k available, 75100k reserved, 212992K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0053000 ( 300 kB)
[ 0.000000] .text : 0xc0053000 - 0xc08c2d08 (8640 kB)
[ 0.000000] .data : 0xc08c4000 - 0xc0958160 ( 593 kB)
[ 0.000000] .bss : 0xc0958184 - 0xc0ec2378 (5545 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000122] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
[ 0.062561] pid_max: default: 32768 minimum: 301
[ 0.063354] Security Framework initialized
[ 0.063354] AppArmor: AppArmor initialized
[ 0.063537] Yama: becoming mindful.
[ 0.063537] Mount-cache hash table entries: 512
[ 0.063537] CPU: Testing write buffer coherency: ok
[ 0.068786] twd_timer_setup: no clock found
[ 0.068786] Calibrating local timer... 491.42MHz.
[ 0.109680] L310 cache controller enabled
[ 0.109680] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[ 0.170684] CPU1: Booted secondary processor
[ 0.239349] Brought up 2 CPUs
[ 0.239410] SMP: Total of 2 processors activated (3963.96 BogoMIPS).
[ 0.240875] devtmpfs: initialized
[ 0.251464] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[ 0.251464] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
[ 0.251464] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
[ 0.251464] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
[ 0.251464] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[ 0.251617] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[ 0.251617] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[ 0.251617] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[ 0.251708] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
[ 0.251708] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp
[ 0.251708] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for ipu
[ 0.251708] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.260009] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.264648] print_constraints: dummy:
[ 0.264648] NET: Registered protocol family 16
[ 0.264648] Trying to unpack rootfs image as initramfs...
[ 0.406768] Freeing initrd memory: 2168K
[ 0.407623] GPMC revision 6.0
[ 0.413604] omap_device: omap_gpio.0: new worst case activate latency 0: 335693
[ 0.415191] OMAP GPIO hardware version 0.1
[ 0.416107] OMAP GPIO hardware version 0.1
[ 0.416687] OMAP GPIO hardware version 0.1
[ 0.418029] OMAP GPIO hardware version 0.1
[ 0.418548] OMAP GPIO hardware version 0.1
[ 0.419403] OMAP GPIO hardware version 0.1
[ 0.424346] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.424346] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.430816] omap_device: omap_uart.0: new worst case activate latency 0: 61035
[ 0.432342] omap_device: omap_uart.2: new worst case activate latency 0: 122070
[ 0.454956] pm_dbg_init: only OMAP3 supported
[ 0.456298] OMAP DMA hardware revision 0.0
[ 0.515014] bio: create slab <bio-0> at 0
[ 0.517761] print_constraints: vwl1271: 1800 mV
[ 0.522216] SCSI subsystem initialized
[ 0.523498] omap_device: omap2_mcspi.1: new worst case deactivate latency 0: 274658
[ 0.524230] omap_device: omap2_mcspi.3: new worst case activate latency 0: 91552
[ 0.527069] usbcore: registered new interface driver usbfs
[ 0.527709] usbcore: registered new interface driver hub
[ 0.528137] usbcore: registered new device driver usb
[ 0.531188] omap_device: omap_i2c.1: new worst case activate latency 0: 122070
[ 0.544311] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[ 0.547576] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 0.548919] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.551330] print_constraints: VUSB: 3300 mV normal standby
[ 0.751800] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.754028] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.755432] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.756774] print_constraints: VCXIO: 1800 mV normal standby
[ 0.758056] print_constraints: VDAC: 1800 mV normal standby
[ 0.759399] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.760833] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.762176] print_constraints: CLK32KG:
[ 0.763336] print_constraints: VANA: 2100 mV normal standby
[ 0.763732] omap_device: omap_i2c.2: new worst case activate latency 0: 396728
[ 0.765441] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[ 0.787902] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[ 0.802886] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[ 0.805847] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.808502] Bluetooth: Core ver 2.16
[ 0.808807] NET: Registered protocol family 31
[ 0.808807] Bluetooth: HCI device and connection manager initialized
[ 0.808959] Bluetooth: HCI socket layer initialized
[ 0.808959] Bluetooth: L2CAP socket layer initialized
[ 0.809143] Bluetooth: SCO socket layer initialized
[ 0.811340] NetLabel: Initializing
[ 0.811370] NetLabel: domain hash size = 128
[ 0.811370] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.811401] NetLabel: unlabeled traffic allowed by default
[ 0.813354] Switching to clocksource 32k_counter
[ 0.818115] Switched to NOHz mode on CPU #0
[ 0.818786] Switched to NOHz mode on CPU #1
[ 0.823699] cfg80211: Calling CRDA to update world regulatory domain
[ 0.845092] AppArmor: AppArmor Filesystem Enabled
[ 0.890258] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
[ 0.890563] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
[ 0.891296] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[ 0.891937] NET: Registered protocol family 2
[ 0.892700] omap_device: musb-omap2430.-1: new worst case deactivate latency 0: 213623
[ 0.892761] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.892761] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.896759] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
[ 0.913330] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.913330] TCP reno registered
[ 0.913574] UDP hash table entries: 512 (order: 3, 49152 bytes)
[ 0.913574] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
[ 0.914764] NET: Registered protocol family 1
[ 0.915618] RPC: Registered named UNIX socket transport module.
[ 0.915618] RPC: Registered udp transport module.
[ 0.915802] RPC: Registered tcp transport module.
[ 0.915863] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.915893] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.942077] audit: initializing netlink socket (disabled)
[ 0.942596] type=2000 audit(0.953:1): initialized
[ 1.093811] highmem bounce pool size: 64 pages
[ 1.094970] VFS: Disk quotas dquot_6.5.2
[ 1.094970] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.097198] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 1.098297] JFFS2 version 2.2. (NAND) (SUMMARY) ?© 2001-2006 Red Hat, Inc.
[ 1.098297] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.100006] Btrfs loaded
[ 1.100067] msgmni has been set to 1377
[ 1.103057] io scheduler noop registered
[ 1.103057] io scheduler deadline registered
[ 1.103057] io scheduler cfq registered (default)
[ 1.179534] OMAP DSS rev 4.0
[ 1.185363] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.329528] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 1.375244] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 1.406738] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.430053] console [ttyO2] enabled
[ 2.450164] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 2.512268] brd: module loaded
[ 2.526763] loop: module loaded
[ 2.526763] (stk) :sysfs entries created
[ 2.534454] (stk) : debugfs entries created
[ 2.546112] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.554046] omap2-nand driver initializing
[ 2.558929] OneNAND driver initializing
[ 2.567535] usbcore: registered new interface driver asix
[ 2.573577] usbcore: registered new interface driver cdc_ether
[ 2.580139] usbcore: registered new interface driver smsc95xx
[ 2.586486] usbcore: registered new interface driver net1080
[ 2.592834] usbcore: registered new interface driver cdc_subset
[ 2.599517] usbcore: registered new interface driver zaurus
[ 2.602355] cdc_ncm: 01-June-2011
[ 2.609924] usbcore: registered new interface driver cdc_ncm
[ 2.616882] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.624267] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
[ 2.632904] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.640838] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.648681] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 2.660858] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.666931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.675384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.683044] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.688690] usb usb1: Manufacturer: Linux 3.0.0-1402-linaro-lt-omap ehci_hcd
[ 2.696136] usb usb1: SerialNumber: ehci-omap.0
[ 2.704467] hub 1-0:1.0: USB hub found
[ 2.704467] hub 1-0:1.0: 3 ports detected
[ 2.750152] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.756958] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
[ 2.764129] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
[ 2.772155] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
[ 2.848876] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.848876] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.863800] usb usb2: Product: OMAP3 OHCI Host Controller
[ 2.869506] usb usb2: Manufacturer: Linux 3.0.0-1402-linaro-lt-omap ohci_hcd
[ 2.876953] usb usb2: SerialNumber: ohci-omap3.0
[ 2.883453] hub 2-0:1.0: USB hub found
[ 2.887481] hub 2-0:1.0: 3 ports detected
[ 2.893585] usbcore: registered new interface driver cdc_wdm
[ 2.899658] Initializing USB Mass Storage driver...
[ 2.905212] usbcore: registered new interface driver usb-storage
[ 2.911773] USB Mass Storage support registered.
[ 2.917480] usbcore: registered new interface driver libusual
[ 3.034149] usb 1-1: new high speed USB device number 2 using ehci-omap
[ 3.722564] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.729766] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.739227] hub 1-1:1.0: USB hub found
[ 3.743530] hub 1-1:1.0: 5 ports detected
[ 4.157165] usbcore: registered new interface driver usbtest
[ 4.164520] mousedev: PS/2 mouse device common for all mice
[ 4.176696] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 4.183776] twl_rtc twl_rtc: Power up reset detected.
[ 4.190338] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 4.195739] i2c /dev entries driver
[ 4.203399] lirc_dev: IR Remote Control driver registered, major 251
[ 4.210327] IR NEC protocol handler initialized
[ 4.215148] IR RC5(x) protocol handler initialized
[ 4.220245] IR RC6 protocol handler initialized
[ 4.220245] IR JVC protocol handler initialized
[ 4.229827] IR Sony protocol handler initialized
[ 4.234710] IR RC5 (streamzap) protocol handler initialized
[ 4.234710] IR LIRC bridge handler initialized
[ 4.245300] Linux video capture interface: v2.00
[ 4.255157] Driver for 1-wire Dallas network protocol.
[ 4.263061] omap_device: omap_wdt.-1: new worst case activate latency 0: 91552
[ 4.272003] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 4.278747] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517
[ 4.288574] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx
[ 4.297546] Bluetooth: HCI UART driver ver 2.2
[ 4.302276] Bluetooth: HCI H4 protocol initialized
[ 4.305419] Bluetooth: HCI BCSP protocol initialized
[ 4.308624] Bluetooth: HCILL protocol initialized
[ 4.317718] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[ 4.327209] (stc): st_register(2)
[ 4.328002] cpuidle: using governor ladder
[ 4.328216] cpuidle: using governor menu
[ 4.331176] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
[ 4.332916] _regulator_get: omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
[ 4.335510] _regulator_get: omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
[ 4.336212] omap_device: omap_i2c.1: new worst case activate latency 0: 671386
[ 4.355834] usbcore: registered new interface driver usbhid
[ 4.355834] usbhid: USB HID core driver
[ 4.367065] SDP4430 SoC init
[ 4.371124] omap_device: aess.-1: new worst case activate latency 0: 2777099
[ 4.392547] (stc): chnl_id list empty :2
[ 4.397430] (stk) : st_kim_start
[ 4.403137] omap_device: omap_i2c.1: new worst case deactivate latency 0: 91552
[ 4.418243] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[ 4.428009] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[ 4.436279] asoc: null-codec-dai <-> Voice mapping ok
[ 4.442596] asoc: null-codec-dai <-> Tones mapping ok
[ 4.449676] asoc: null-codec-dai <-> Vibra mapping ok
[ 4.457366] asoc: null-codec-dai <-> MODEM mapping ok
[ 4.463562] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[ 4.470825] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 4.478332] omap_device: omap-mcpdm.-1: new worst case activate latency 0: 30517
[ 4.486450] usb 1-1.1: new high speed USB device number 3 using ehci-omap
[ 4.494567] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
[ 4.502410] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
[ 4.503784] (stk) :ldisc_install = 1
[ 4.515777] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
[ 4.526336] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 4.533111] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 4.539642] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 4.546325] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 4.553466] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 4.560424] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 4.567504] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[ 4.574615] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
[ 4.581634] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
[ 4.589355] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
[ 4.605651] input: Panda Headset Jack as /devices/platform/soc-audio.0/sound/card0/input0
[ 4.613555] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 4.623474] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 4.631134] mmc0: new SDHC card at address b368
[ 4.636840] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.645812] mmcblk0: mmc0:b368 PNY 7.51 GiB
[ 4.648468] Error: Driver 'hdmi-audio-dai' is already registered, aborting...
[ 4.648468] OMAP4 HDMI audio SoC init
[ 4.649780] asoc: omap4-hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[ 4.652618] ALSA device list:
[ 4.652740] #0: TI OMAP4 Board
[ 4.652740] #1: TI OMAP4 HDMI Board
[ 4.652740] oprofile: hardware counters not available
[ 4.652740] oprofile: using timer interrupt.
[ 4.689453] TCP cubic registered
[ 4.692993] Initializing XFRM netlink socket
[ 4.698028] NET: Registered protocol family 10
[ 4.702148] mmcblk0: p1 p2
[ 4.707000] smsc95xx v1.0.4
[ 4.711822] IPv6 over IPv4 tunneling driver
[ 4.718292] NET: Registered protocol family 17
[ 4.723602] NET: Registered protocol family 15
[ 4.728637] Bluetooth: RFCOMM TTY layer initialized
[ 4.730133] Bluetooth: RFCOMM socket layer initialized
[ 4.739318] Bluetooth: RFCOMM ver 1.11
[ 4.741638] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.749267] Bluetooth: BNEP filters: protocol multicast
[ 4.754821] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.761413] lib80211: common routines for IEEE802.11 drivers
[ 4.767822] Registering the dns_resolver key type
[ 4.767822] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 4.780456] ThumbEE CPU extension supported.
[ 4.785949] Registering SWP/SWPB emulation handler
[ 4.798095] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethern6
[ 4.800292] Power Management for TI OMAP4.
[ 4.800506] sr_init: No PMIC hook to init smartreflex
[ 4.800506] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 4.800506] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 4.801483] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
[ 4.802124] SmartReflex Class3 initialized
[ 4.872680] mmc1: card claims to support voltages below the defined range. These will be ignored.
[ 4.901123] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 4.908233] mmc1: new SDIO card at address 0001
[ 5.110107] Console: switching to colour frame buffer device 80x30
[ 5.126342] omapdss HDMI: fallback to VGA
[ 5.184478] omapdss HDMI: cannot lock PLL
[ 5.187164] omapdss HDMI: CFG1 0xc00
[ 5.187164] omapdss HDMI: CFG2 0x2004
[ 5.187164] omapdss HDMI: CFG4 0x23955
[ 5.187194] hdmi_pll_init says 65426
[ 5.187194] omapdss HDMI error: failed to power on device
[ 5.187225] omapdss error: failed to power on
[ 5.240142] usb 1-1.2: new high speed USB device number 4 using ehci-omap
[ 5.251373] omap_device: omap_i2c.1: new worst case deactivate latency 0: 152587
[ 5.264739] regulator_init_complete: VANA: incomplete constraints, leaving on
[ 5.275665] regulator_init_complete: CLK32KG: incomplete constraints, leaving on
[ 5.290161] regulator_init_complete: VDAC: incomplete constraints, leaving on
[ 5.301422] regulator_init_complete: VCXIO: incomplete constraints, leaving on
[ 5.315368] regulator_init_complete: VUSB: incomplete constraints, leaving on
[ 5.326965] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 5.344238] omapdss HDMI: fallback to VGA
[ 5.404724] omapdss HDMI: cannot lock PLL
[ 5.404724] omapdss HDMI: CFG1 0xc00
[ 5.404724] omapdss HDMI: CFG2 0x2004
[ 5.404754] omapdss HDMI: CFG4 0x23955
[ 5.404754] hdmi_pll_init says 65426
[ 5.404785] omapdss HDMI error: failed to power on device
[ 5.404785] omapdss error: failed to power on
[ 5.458984] omapdss HDMI: fallback to VGA
[ 5.468200] usb 1-1.2: New USB device found, idVendor=1234, idProduct=2088
[ 5.468200] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.468200] usb 1-1.2: Product: V88
[ 5.468292] usb 1-1.2: Manufacturer: V88
[ 5.468292] usb 1-1.2: SerialNumber: 18165700C0D7BC09
[ 5.470764] scsi0 : usb-storage 1-1.2:1.0
[ 5.511505] (stk) :line disc installation timed out
[ 5.511505] (stk) :ldisc_install = 0
[ 5.524505] omapdss HDMI: cannot lock PLL
[ 5.524505] omapdss HDMI: CFG1 0xc00
[ 5.524505] omapdss HDMI: CFG2 0x2004
[ 5.524749] omapdss HDMI: CFG4 0x23955
[ 5.524749] hdmi_pll_init says 65426
[ 5.524780] omapdss HDMI error: failed to power on device
[ 5.524780] omapdss error: failed to power on
[ 5.603240] (stk) :ldisc_install = 1
[ 5.614288] omap_vout omap_vout: Buffer Size = 3686400
[ 5.638275] omap_vout omap_vout: : registered and initialized video device 1
[ 5.662292] Freeing init memory: 300K
Loading, please wait...
[ 5.813751] usb 1-1.3: new high speed USB device number 5 using ehci-omap
[ 5.856658] udev[804]: starting version 167
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... [ 5.949615] usb 1-1.3: New USB device found, idVendor=05ac, idProduc5
Begin: Running /scripts/local-top ... done.
[ 6.037841] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.160797] usb 1-1.3: Product: Keyboard Hub
[ 6.173187] usb 1-1.3: Manufacturer: Apple Inc.
[ 6.180114] usb 1-1.3: SerialNumber: 000000000000
[ 6.201660] hub 1-1.3:1.0: USB hub found
[ 6.208435] hub 1-1.3:1.0: 3 ports detected
Begin: Running /scripts/local-premount ... done.
[ 6.509582] EXT3-fs: barriers not enabled
[ 6.516540] usb 1-1.3.1: new low speed USB device number 6 using ehci-omap
[ 6.526641] scsi 0:0:0:0: Direct-Access V88 V88 5.00 PQ: 0 ANSI: 2
[ 6.527221] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 6.528503] kjournald starting. Commit interval 5 seconds
[ 6.528686] (stk) :line disc installation timed out
[ 6.528686] (stk) :ldisc_install = 0Begin: Running /scripts/local-bottom ... done.
done.
[ 6.666381] sd 0:0:0:0: [sda] 3901440 512-byte logical blocks: (1.99 GB/1.86 GiB)
Begin: Running /scripts/init-bottom ... [ 6.695434] usb 1-1.3.1: New USB device found, idVendor=046d, idPe
[ 6.722991] sd 0:0:0:0: [sda] Write Protect is off
[ 6.732635] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.760009] sd 0:0:0:0: [sda] No Caching mode page present
[ 6.774444] usb 1-1.3.1: Product: USB-PS/2 Optical Mouse
[ 6.787994] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.809265] usb 1-1.3.1: Manufacturer: Logitech
[ 6.836730] sd 0:0:0:0: [sda] No Caching mode page present
[ 6.882324] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-11
[ 6.902709] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.925811] (stk) :ldisc_install = 1
[ 6.935821] sda: sda1
[ 6.955413] generic-usb 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]0
done.
[ 6.986053] sd 0:0:0:0: [sda] No Caching mode page present
[ 6.999206] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 7.008850] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 7.063964] usb 1-1.3.2: new low speed USB device number 7 using ehci-omap
[ 7.205047] usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=021d
[ 7.215576] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.229461] usb 1-1.3.2: Product: Apple Keyboard
[ 7.238769] usb 1-1.3.2: Manufacturer: Apple Inc.
[ 7.923065] (stk) :line disc installation timed out
[ 7.929046] (stk) :ldisc_install = 0
[ 8.053192] (stk) :ldisc_install = 1[ 9.056304] (stk) :line disc installation timed out
fsck from util-linux-ng 2.17.2
rootfs: Superblock last write time is in the future.
(by less than a day, probably due to the hardware clock being incorrectly set). FIXED.
rootfs: clean, 158629/489600 files, 509687/1956608 blocks
[ 11.735626] (stk) :line disc installation timed out
[ 12.845397] (stk) :line disc installation timed out
[ 12.853454] (stc): KIM failure complete callback
[ 12.861236] ti_st_open: st_register failed -22
[ 12.861236] fmdrv: ST reg comp CB called with error status 146
[ 12.861236] fmdrv: Unable to prepare FM CORE
* Starting mDNS/DNS-SD daemon[ OK ]
fsck from util-linux-ng 2.17.2
rootfs: Superblock last write time is in the future.
(by less than a day, probably due to the hardware clock being incorrectly set). FIXED.
rootfs: clean, 158629/489600 files, 509687/1956608 blocks
* Starting mDNS/DNS-SD daemon[ OK ]
[ 19.272979]
[ 19.272979] =============================================
[ 19.274322] [ INFO: possible recursive locking detected ]
[ 19.286407] 3.0.0-1402-linaro-lt-omap #3~ppa~natty-Ubuntu
[ 19.289916] ---------------------------------------------
[ 19.297790] Xorg/1341 is trying to acquire lock:
[ 19.297943] (psPVRSRVMutex){+.+.+.}, at: [<bf0a0434>] LinuxMMapPerProcessDisconnect+0x18/0x64 [pvrsrvkm]
[ 19.305572]
[ 19.305572] but task is already holding lock:
[ 19.319030] (psPVRSRVMutex){+.+.+.}, at: [<bf0a0640>] PVRSRVRelease+0x14/0x80 [pvrsrvkm]
[ 19.323120]
[ 19.323120] other info that might help us debug this:
[ 19.330108] Possible unsafe locking scenario:
[ 19.330108]
[ 19.336639] CPU0
[ 19.343170] ----
[ 19.344726] lock(psPVRSRVMutex);
[ 19.349578] lock(psPVRSRVMutex);
[ 19.349578]
[ 19.349578] *** DEADLOCK ***
[ 19.353179]
[ 19.355041] May be due to missing lock nesting notation
[ 19.355041]
[ 19.361938] 1 lock held by Xorg/1341:
[ 19.361938] #0: (psPVRSRVMutex){+.+.+.}, at: [<bf0a0640>] PVRSRVRelease+0x14/0x80 [pvrsrvkm]
[ 19.361938]
[ 19.361938] stack backtrace:
[ 19.379852] [<c0063990>] (unwind_backtrace+0x0/0xe0) from [<c00c5abc>] (print_deadlock_bug+0xb0/0xdc)
[ 19.393920] [<c00c5abc>] (print_deadlock_bug+0xb0/0xdc) from [<c00c7724>] (validate_chain.clone.16+0x4cc/)
[ 19.395477] [<c00c7724>] (validate_chain.clone.16+0x4cc/0x51c) from [<c00c88e4>] (__lock_acquire+0x6e0/0x)
[ 19.408386] [<c00c88e4>] (__lock_acquire+0x6e0/0x7ac) from [<c00c8fd4>] (lock_acquire+0x114/0x138)
[ 19.408386] [<c00c8fd4>] (lock_acquire+0x114/0x138) from [<c0657890>] (mutex_lock_nested+0x60/0x398)
[ 19.434204] [<c0657890>] (mutex_lock_nested+0x60/0x398) from [<bf0a0434>] (LinuxMMapPerProcessDisconnect+)
[ 19.440277] [<bf0a0434>] (LinuxMMapPerProcessDisconnect+0x18/0x64 [pvrsrvkm]) from [<bf0a2088>] (OSPerPro)
[ 19.460357] [<bf0a2088>] (OSPerProcessPrivateDataDeInit+0x10/0x34 [pvrsrvkm]) from [<bf0af558>] (BridgedD)
[ 19.465240] [<bf0af558>] (BridgedDispatchKM+0x190/0x1c0 [pvrsrvkm]) from [<bf0af710>] (PVRSRVPerProcessDa)
[ 19.485748] [<bf0af710>] (PVRSRVPerProcessDataDisconnect+0x40/0x58 [pvrsrvkm]) from [<bf0a0678>] (PVRSRVR)
[ 19.499511] [<bf0a0678>] (PVRSRVRelease+0x4c/0x80 [pvrsrvkm]) from [<bf0b5e44>] (PVRSRVDrmRelease+0x18/0x)
[ 19.510925] [<bf0b5e44>] (PVRSRVDrmRelease+0x18/0x20 [pvrsrvkm]) from [<c012a4f4>] (__fput+0xf8/0x1c0)
[ 19.510925] [<c012a4f4>] (__fput+0xf8/0x1c0) from [<c01272cc>] (filp_close+0x70/0x7c)
[ 19.524505] [<c01272cc>] (filp_close+0x70/0x7c) from [<c0127364>] (sys_close+0x8c/0xcc)
[ 19.532287] [<c0127364>] (sys_close+0x8c/0xcc) from [<c005cf80>] (ret_fast_syscall+0x0/0x3c)
[ 19.735321] type=1400 audit(1311811130.367:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhc"
[ 19.771179] type=1400 audit(1311811130.398:3): apparmor="STATUS" operation="profile_replace" name="/sbin/"
[ 19.793457] type=1400 audit(1311811130.421:4): apparmor="STATUS" operation="profile_replace" name="/sbin/"
[ 19.808441] type=1400 audit(1311811130.437:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/"
[ 19.826934] type=1400 audit(1311811130.460:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/"
[ 19.844482] type=1400 audit(1311811130.476:7): apparmor="STATUS" operation="profile_replace" name="/usr/l"
[ 19.863067] type=1400 audit(1311811130.492:8): apparmor="STATUS" operation="profile_replace" name="/usr/l"
[ 19.884429] type=1400 audit(1311811130.515:9): apparmor="STATUS" operation="profile_replace" name="/usr/l"
[ 19.905212] type=1400 audit(1311811130.531:10): apparmor="STATUS" operation="profile_replace" name="/sbin"
[ 19.928741] type=1400 audit(1311811130.554:11): apparmor="STATUS" operation="profile_replace" name="/usr/"
* Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
[ 23.385192] wl1271: firmware booted (Rev 6.1.3.50.55)
[ 23.391937] ieee80211 phy0: device now idle
[ 23.418304] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.158874] ieee80211 phy0: device no longer idle - scanning
[ 25.047790] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 25.886535] ieee80211 phy0: device now idle
[ 33.835815] eth0: no IPv6 routers present
[ 43.997924] ieee80211 phy0: device no longer idle - scanning
[ 45.722503] ieee80211 phy0: device now idle
[ 52.739562] audit_printk_skb: 48 callbacks suppressed
[ 52.739562] type=1400 audit(1311811163.367:28): apparmor="STATUS" operation="profile_load" name="/usr/bin"
[ 72.001190] type=1400 audit(1311811182.632:29): apparmor="STATUS" operation="profile_load" name="/usr/bin"
[ 72.024566] type=1400 audit(1311811182.656:30): apparmor="STATUS" operation="profile_load" name="/usr/bin"
[ OK ]
[ 73.998229] ieee80211 phy0: device no longer idle - scanning
[ 75.697875] ieee80211 phy0: device now idle
speech-dispatcher disabled; edit /etc/default/speech-dispatcher
[ OK ]rting bluetooth
[ 107.603332] ti_st_open: hci0 efb14000
[ 107.608123] (stc): st_register(2) *
[ 107.611907] (stc): chnl_id list empty :2 PulseAudio confi
[ 107.617492] (stk) : st_kim_startgured for per-user sessions
[ 107.711853] (stk) :ldisc_install = 1
[ 108.913604] (stk) :line disc installation timed out
[ 108.913635] (stk) :ldisc_install = 0
[ 109.022308] (stk) :ldisc_install = 1
[ 110.054687] (stk) :line disc installation timed out
[ 110.059936] (stk) :ldisc_install = 0saned disabled; edit /etc/default/saned
[ 110.180572] (stk) :ldisc_install = 1 * Enabling additional
executable binary formats binfmt-support )
To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-landing-team-ti/+bug/817282/+subscriptions
