tiomap-dev team mailing list archive

[Abhishek Paliwal <965091@xxxxxxxxxxxxxxxxxx>]

** Description changed:

  Description:
  ==========
- Not getting control of serial port. 
+ Not getting control of serial port.
  
  Bootup pandaboard with build:
  https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88
  
  Serial logs are printed but I do not get control of serial console(no #
  prompt available to enter any text)
+ 
+ Also,
+ adb shell (over usb) does not yield a shell. Other adb commands work fine.
+ 
  
  Reproducible:
  ===========
  Yes, 5/5 time
  
  IMPACT:
  ========
  Can't get hold of serial console, blocks all debugging which can be done via serial console
  
  Steps:
  ==========
  1. Flash sd card with image https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 - follow instructions on this page.
  2. Put sd card in pandaboard 4430 or 4460 and bootup. Serial cable connected from board to host machine.
  3. Run command "minicom -D /dev/ttyS0 " on host machine.
  Issue:  I can see logs getting printed on serial console but I do not get # prompt on serial port.
  
+ Also,
+ adb shell (over usb) does not yield a shell. Other adb commands work fine.
  
  Hardware:
  ==========
  Pandaboard 4430 /4460
  Serial cable  from Device to Host PC.
  USB Mouse connected
  HDMI out to TV
  8GB SD card
  
  Software:
  ==========
  https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88
  
  Logs:
  =====
  minicom logs attached.

-- 
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to linaro-landing-team-ti.
https://bugs.launchpad.net/bugs/965091

Title:
  Panda: Can't enter commands on serial console for "panda-master-gcc44
  -aosp-stable-blob"

Status in Linaro Android:
  New
Status in Linaro Texas Instruments Landing Team:
  New

Bug description:
  Description:
  ==========
  Not getting control of serial port.

  Bootup pandaboard with build:
  https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88

  Serial logs are printed but I do not get control of serial console(no
  # prompt available to enter any text)

  Also,
  adb shell (over usb) does not yield a shell. Other adb commands work fine.

  
  Reproducible:
  ===========
  Yes, 5/5 time

  IMPACT:
  ========
  Can't get hold of serial console, blocks all debugging which can be done via serial console

  Steps:
  ==========
  1. Flash sd card with image https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88 - follow instructions on this page.
  2. Put sd card in pandaboard 4430 or 4460 and bootup. Serial cable connected from board to host machine.
  3. Run command "minicom -D /dev/ttyS0 " on host machine.
  Issue:  I can see logs getting printed on serial console but I do not get # prompt on serial port.

  Also,
  adb shell (over usb) does not yield a shell. Other adb commands work fine.

  Hardware:
  ==========
  Pandaboard 4430 /4460
  Serial cable  from Device to Host PC.
  USB Mouse connected
  HDMI out to TV
  8GB SD card

  Software:
  ==========
  https://android-build.linaro.org/builds/~linaro-android/panda-master-gcc44-aosp-stable-blob/#build=88

  Logs:
  =====
  minicom logs attached.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-android/+bug/965091/+subscriptions