tiomap-dev team mailing list archive
-
tiomap-dev team
-
Mailing list archive
-
Message #01614
Re: [Bug 881362] Re: lava-test powermanagement fails on panda
Hi Botao,
I cannot open each log page either.
On 13 June 2012 19:21, Amit Kucheria <881362@xxxxxxxxxxxxxxxxxx> wrote:
> Botao, I see 404 errors for each of the detail log output links above.
> Same for the LAVA job id.
>
> ** Changed in: linaro-ubuntu
> Status: Confirmed => Incomplete
>
> --
> You received this bug notification because you are a bug assignee.
> https://bugs.launchpad.net/bugs/881362
>
> Title:
> lava-test powermanagement fails on panda
>
> Status in Linaro Texas Instruments Landing Team:
> New
> Status in Linaro Ubuntu Evaluation Builds:
> Incomplete
>
> Bug description:
> Hwpack: http://snapshots.linaro.org/oneiric/lt-panda-x11-base-
> oneiric/20111023/0/images/hwpack/hwpack_linaro-lt-
> panda-x11-base_20111023-0_armel_supported.tar.gz
>
> Image: http://snapshots.linaro.org/oneiric/linaro-o-ubuntu-
> desktop/20111023/0/images/tar/linaro-o-ubuntu-desktop-
> tar-20111023-0.tar.gz
>
> 'lava-test run pwrmgmt' generates following log:
>
> $ cat
> ~/.local/share/lava_test/results/pwrmgmt.2011-10-24T13\:04\:11Z/testoutput.log
> make[1]: Entering directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils'
> make[1]: Nothing to be done for `check'.
> make[1]: Leaving directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils'
> make[1]: Entering directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq'
> rm -f cpufreq_01.log cpufreq_02.log cpufreq_03.log cpufreq_04.log
> cpufreq_05.log cpufreq_06.log cpufreq_07.log cpufreq_08.log cpufreq_09.log
> ###
> ### cpufreq_01:
> ### test the cpufreq framework is available for frequency
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_01
> ###
> cpufreq_01.0/cpu0: checking 'scaling_available_frequencies' exists...
> pass
> cpufreq_01.1/cpu0: checking 'scaling_cur_freq' exists...
> pass
> cpufreq_01.2/cpu0: checking 'scaling_setspeed' exists...
> pass
> cpufreq_01.0/cpu1: checking 'scaling_available_frequencies' exists...
> pass
> cpufreq_01.1/cpu1: checking 'scaling_cur_freq' exists...
> pass
> cpufreq_01.2/cpu1: checking 'scaling_setspeed' exists...
> pass
> ###
> ### cpufreq_02:
> ### test the cpufreq framework is available for governor
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_02
> ###
> cpufreq_02.0/cpu0: checking 'scaling_available_governors' exists...
> pass
> cpufreq_02.1/cpu0: checking 'scaling_governor' exists...
> pass
> cpufreq_02.0/cpu1: checking 'scaling_available_governors' exists...
> pass
> cpufreq_02.1/cpu1: checking 'scaling_governor' exists...
> pass
> ###
> ### cpufreq_03:
> ### test the governor change is effective
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_03
> ###
> cpufreq_03.0: run as non-root...
> skip
> ###
> ### cpufreq_04:
> ### test the change of the frequency is effective in 'userspace' mode
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_04
> ###
> cpufreq_04.0: run as non-root...
> skip
> ###
> ### cpufreq_05:
> ### test 'ondemand' and 'conservative' trigger correctly the
> configuration directory
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_05
> ###
> cpufreq_05.0: run as non-root...
> skip
> ###
> ### cpufreq_06:
> ### test the change of the frequencies affect the performances of a test
> program
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_06
> ###
> cpufreq_06.0: run as non-root...
> skip
> ###
> ### cpufreq_07:
> ### test the load of the cpu affects the frequency with 'ondemand'
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_07
> ###
> cpufreq_07.0: run as non-root...
> skip
> ###
> ### cpufreq_08:
> ### test the load of the cpu does not affect the frequency with
> 'userspace'
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_08
> ###
> cpufreq_08.0: run as non-root...
> skip
> ###
> ### cpufreq_09:
> ### test the load of the cpu does not affect the frequency with
> 'powersave'
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_09
> ###
> cpufreq_09.0: run as non-root...
> skip
> make[1]: Leaving directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq'
> make[1]: Entering directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug'
> rm -f 1_sanity_check.log cpuhotplug_01.log cpuhotplug_02.log
> cpuhotplug_03.log cpuhotplug_04.log cpuhotplug_05.log cpuhotplug_06.log
> cpuhotplug_07.log cpuhotplug_08.log z_sanity_check.log
> ###
> ### 1_sanity_check:
> ### ensure all the cpus are online before the tests
> ### ###
> 1_sanity_check.0: checking all cpu are online...
> pass
> ###
> ### cpuhotplug_01:
> ### test the sysfs files are present
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_01
> ###
> cpuhotplug_01.0: checking 'online' exists...
> pass
> cpuhotplug_01.1: checking 'offline' exists...
> pass
> cpuhotplug_01.2: checking 'possible' exists...
> pass
> cpuhotplug_01.3: checking 'present' exists...
> pass
> cpuhotplug_01.0/cpu0: checking 'online' exists...
> pass
> cpuhotplug_01.0/cpu1: checking 'online' exists...
> pass
> ###
> ### cpuhotplug_02:
> ### test the cpu state is reflected in sysfs
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_02
> ###
> cpuhotplug_02.0/cpu1: checking cpu is offline...
> fail
> ###
> ### cpuhotplug_03:
> ### test the affinity does not work on an offline cpu
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_03
> ###
> cpuhotplug_03.0/cpu1: checking setting affinity on cpu fails...
> fail
> ###
> ### cpuhotplug_04:
> ### test task is migrated with task affinity
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_04
> ###
> cpuhotplug_04.0/cpu1: checking affinity is set...
> fail
> cpuhotplug_04.1/cpu1: checking offlining a cpu with affinity succeed...
> fail
> cpuhotplug_04.2/cpu1: checking affinity changed...
> pass
> ###
> ### cpuhotplug_05:
> ### test cpus are reflected on /proc/cpuinfo correctly
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_05
> ###
> processor : 1
> cpuhotplug_05.0/cpu1: checking offline processor not found in cpuinfo...
> fail
> ###
> ### cpuhotplug_06:
> ### test interrupts show the right configuration in /proc/interrupts
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_06
> ###
> CPU0 CPU1
> cpuhotplug_06.0/cpu1: checking offline processor not found in
> interrupts... fail
> ###
> ### cpuhotplug_07:
> ### test userspace notification
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_07
> ###
> cpuhotplug_07.0/cpu1: checking offline event was received...
> fail
> cpuhotplug_07.1/cpu1: checking online event was received...
> fail
> ###
> ### cpuhotplug_08:
> ### test userspace notification
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_08
> ###
> cpuhotplug_08.0: checking cpu1 is offline...
> fail
> cpuhotplug_08.1: checking cpu1 is online...
> fail
> ###
> ### z_sanity_check:
> ### ensure all the cpus are online when the tests are finished
> ### ###
> z_sanity_check.0: checking all cpu are back online...
> pass
> make[1]: Leaving directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug'
> make[1]: Entering directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/sched_mc'
> rm -f sched_01.log sched_02.log sched_03.log sched_04.log
> ###
> ### sched_01:
> ### test the presence of the 'sched_mc_power_savings' file
> ###
> https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#sched_mc_01
> ###
> sched_01.0: checking 'sched_mc_power_savings' exists...
> fail
> make[1]: Leaving directory
> `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/sched_mc'
>
> To manage notifications about this bug go to:
>
> https://bugs.launchpad.net/linaro-landing-team-ti/+bug/881362/+subscriptions
>
--
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to linaro-landing-team-ti.
https://bugs.launchpad.net/bugs/881362
Title:
lava-test powermanagement fails on panda
Status in Linaro Texas Instruments Landing Team:
New
Status in Linaro Ubuntu Evaluation Builds:
Incomplete
Bug description:
Hwpack: http://snapshots.linaro.org/oneiric/lt-panda-x11-base-
oneiric/20111023/0/images/hwpack/hwpack_linaro-lt-
panda-x11-base_20111023-0_armel_supported.tar.gz
Image: http://snapshots.linaro.org/oneiric/linaro-o-ubuntu-
desktop/20111023/0/images/tar/linaro-o-ubuntu-desktop-
tar-20111023-0.tar.gz
'lava-test run pwrmgmt' generates following log:
$ cat ~/.local/share/lava_test/results/pwrmgmt.2011-10-24T13\:04\:11Z/testoutput.log
make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/utils'
make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq'
rm -f cpufreq_01.log cpufreq_02.log cpufreq_03.log cpufreq_04.log cpufreq_05.log cpufreq_06.log cpufreq_07.log cpufreq_08.log cpufreq_09.log
###
### cpufreq_01:
### test the cpufreq framework is available for frequency
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_01
###
cpufreq_01.0/cpu0: checking 'scaling_available_frequencies' exists... pass
cpufreq_01.1/cpu0: checking 'scaling_cur_freq' exists... pass
cpufreq_01.2/cpu0: checking 'scaling_setspeed' exists... pass
cpufreq_01.0/cpu1: checking 'scaling_available_frequencies' exists... pass
cpufreq_01.1/cpu1: checking 'scaling_cur_freq' exists... pass
cpufreq_01.2/cpu1: checking 'scaling_setspeed' exists... pass
###
### cpufreq_02:
### test the cpufreq framework is available for governor
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_02
###
cpufreq_02.0/cpu0: checking 'scaling_available_governors' exists... pass
cpufreq_02.1/cpu0: checking 'scaling_governor' exists... pass
cpufreq_02.0/cpu1: checking 'scaling_available_governors' exists... pass
cpufreq_02.1/cpu1: checking 'scaling_governor' exists... pass
###
### cpufreq_03:
### test the governor change is effective
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_03
###
cpufreq_03.0: run as non-root... skip
###
### cpufreq_04:
### test the change of the frequency is effective in 'userspace' mode
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_04
###
cpufreq_04.0: run as non-root... skip
###
### cpufreq_05:
### test 'ondemand' and 'conservative' trigger correctly the configuration directory
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_05
###
cpufreq_05.0: run as non-root... skip
###
### cpufreq_06:
### test the change of the frequencies affect the performances of a test program
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_06
###
cpufreq_06.0: run as non-root... skip
###
### cpufreq_07:
### test the load of the cpu affects the frequency with 'ondemand'
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_07
###
cpufreq_07.0: run as non-root... skip
###
### cpufreq_08:
### test the load of the cpu does not affect the frequency with 'userspace'
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_08
###
cpufreq_08.0: run as non-root... skip
###
### cpufreq_09:
### test the load of the cpu does not affect the frequency with 'powersave'
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpufreq_09
###
cpufreq_09.0: run as non-root... skip
make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpufreq'
make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug'
rm -f 1_sanity_check.log cpuhotplug_01.log cpuhotplug_02.log cpuhotplug_03.log cpuhotplug_04.log cpuhotplug_05.log cpuhotplug_06.log cpuhotplug_07.log cpuhotplug_08.log z_sanity_check.log
###
### 1_sanity_check:
### ensure all the cpus are online before the tests
### ###
1_sanity_check.0: checking all cpu are online... pass
###
### cpuhotplug_01:
### test the sysfs files are present
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_01
###
cpuhotplug_01.0: checking 'online' exists... pass
cpuhotplug_01.1: checking 'offline' exists... pass
cpuhotplug_01.2: checking 'possible' exists... pass
cpuhotplug_01.3: checking 'present' exists... pass
cpuhotplug_01.0/cpu0: checking 'online' exists... pass
cpuhotplug_01.0/cpu1: checking 'online' exists... pass
###
### cpuhotplug_02:
### test the cpu state is reflected in sysfs
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_02
###
cpuhotplug_02.0/cpu1: checking cpu is offline... fail
###
### cpuhotplug_03:
### test the affinity does not work on an offline cpu
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_03
###
cpuhotplug_03.0/cpu1: checking setting affinity on cpu fails... fail
###
### cpuhotplug_04:
### test task is migrated with task affinity
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_04
###
cpuhotplug_04.0/cpu1: checking affinity is set... fail
cpuhotplug_04.1/cpu1: checking offlining a cpu with affinity succeed... fail
cpuhotplug_04.2/cpu1: checking affinity changed... pass
###
### cpuhotplug_05:
### test cpus are reflected on /proc/cpuinfo correctly
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_05
###
processor : 1
cpuhotplug_05.0/cpu1: checking offline processor not found in cpuinfo... fail
###
### cpuhotplug_06:
### test interrupts show the right configuration in /proc/interrupts
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_06
###
CPU0 CPU1
cpuhotplug_06.0/cpu1: checking offline processor not found in interrupts... fail
###
### cpuhotplug_07:
### test userspace notification
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_07
###
cpuhotplug_07.0/cpu1: checking offline event was received... fail
cpuhotplug_07.1/cpu1: checking online event was received... fail
###
### cpuhotplug_08:
### test userspace notification
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#cpuhotplug_08
###
cpuhotplug_08.0: checking cpu1 is offline... fail
cpuhotplug_08.1: checking cpu1 is online... fail
###
### z_sanity_check:
### ensure all the cpus are online when the tests are finished
### ###
z_sanity_check.0: checking all cpu are back online... pass
make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/cpuhotplug'
make[1]: Entering directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/sched_mc'
rm -f sched_01.log sched_02.log sched_03.log sched_04.log
###
### sched_01:
### test the presence of the 'sched_mc_power_savings' file
### https://wiki.linaro.org/WorkingGroups/PowerManagement/Doc/QA/Scripts#sched_mc_01
###
sched_01.0: checking 'sched_mc_power_savings' exists... fail
make[1]: Leaving directory `/home/linaro/.local/share/lava_test/installed-tests/pwrmgmt/pm-qa/sched_mc'
To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-landing-team-ti/+bug/881362/+subscriptions
References
