tiomap-dev team mailing list archive

[Botao Sun <botao.sun@xxxxxxxxxx>]

Although now can press F1 key to wake the board up, but during the board
suspend, there are many "Automatic Resume Actions" happened, refer to
attachment to get the detailed log output.

Build is 12.06 RC2 image:

https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47
-tilt-tracking-blob/#build=87

** Attachment added: "Many_Automatic_Resumes.tar.bz2"
   https://bugs.launchpad.net/linaro-landing-team-ti/+bug/910758/+attachment/3195939/+files/Many_Automatic_Resumes.tar.bz2

-- 
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to linaro-landing-team-ti.
https://bugs.launchpad.net/bugs/910758

Title:
  Panda: Resume failing on tracking-panda build

Status in Linaro Android:
  New
Status in Linaro Texas Instruments Landing Team:
  New

Bug description:
  Description:
  ==========

  Once device enters Suspend mode it cannot come out of it.
  Tried USB Mouse/Keyboard(F1 and other keys) events to wake up device but it does not work.

  Using https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=131
  ( Linux-3.2.0-rc7+ )

  Reproducible:
  ===========
  Yes, 5/5 time

  IMPACT:
  ========
  Suspend Failure - Need to reboot device to use it again - once it enters suspend mode.

  Steps:
  ==========
  Method-1
  1. Flash  https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=131

  2. Bootup device and Leave device idle for 1-2 minutes(as default sleep value is after 1 minute)
  Issue: Once device enters suspend mode it never wakes up. Need to reboot device now if any functionality has to be used.

  Method-2
  1. Flash  https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=131
  2. Bootup device
  3. Type "input keyevent 6" on serial console.

  Issue:Device hangs after this. Unable to resume.

  Hardware:
  ==========
  8GB SD card
  Pandaboard
  HDMI out to Dell Monitor.
  USB Mouse/Keyboard connected, Ethernet cable plugged in.

  Software:
  ==========
   https://android-build.linaro.org/builds/~linaro-android/tracking-panda/#build=131

  Logs:
  =========
  Serial logs attached.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-android/+bug/910758/+subscriptions