tiomap-dev team mailing list archive
-
tiomap-dev team
-
Mailing list archive
-
Message #01782
[Bug 920872] Re: Manual ethernet configuration required to enable browsing
Observed on:
https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47
-tilt-tracking-blob/#build=111
--
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to linaro-landing-team-ti.
https://bugs.launchpad.net/bugs/920872
Title:
Manual ethernet configuration required to enable browsing
Status in Linaro Android:
Confirmed
Status in Linaro Texas Instruments Landing Team:
Invalid
Bug description:
Description:
==========
1. Correct ethernet configurations are not set up after bootup , so accessing internet does not work.
2. After Manual configurations browsing works.
eg:
after bootup
#netcfg
eth0 UP 192.168.0.188/24 0x00001043 32:eb:18:e4:3f:f3
Expected: here the IP should be in the range (192.168.1.xx) as dhcp assigns ip in that range.
reassing ip to device.
#netcfg eth0 dhcp
eth0 UP 192.168.1.7/24 0x00001043 0a:95:f2:8e:f4:ec
Correct ip now , but Browsing still doesn't work works.
Still dns settings needs to be done. see below
#setprop net.dns1 8.8.8.8
Now browsing works(can open google.com using browser app)
Reproducible:
===========
Yes, 5/5 time
IMPACT:
========
Can't boot up and do internet browsing straightaway.
Steps:
==========
1. Connect device with ethernet cable with proper internet connection. Device connected behind a router.
2. Bootup device and check network configurations via netcfg command.
Issue 1- device does not get proper ip as expected , gets ip 192.168.0.xx instead of 192.168.1.xx
3. reassigning ip via dhcp "#netcfg eth0 dhcp '
Issue2- now device gets ip in correct range (192.168.1.xx) - buts still dns configurations need to be done to enable browsing
4. 'setprop net.dns1 8.8.8.8' - now browsing works.
Hardware:
==========
Pandaboard 4430
USB Mouse connected
HDMI out to TV
8GB SD card
Software:
==========
https://android-build.linaro.org/builds/~linaro-android/landing-panda-12.01-release/#build=3
Logs:
======
serial logs attached.
To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-android/+bug/920872/+subscriptions