tiomap-dev team mailing list archive

[Botao Sun <botao.sun@xxxxxxxxxx>]

Now the eth0 interface is enabled automatically, the whole Ethernet
works well. Observed on:

https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47
-tilt-tracking-blob-12.07-release/#build=3

-- 
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to linaro-landing-team-ti.
https://bugs.launchpad.net/bugs/920872

Title:
  Manual ethernet configuration required to enable browsing

Status in Linaro Android:
  Confirmed
Status in Linaro Texas Instruments Landing Team:
  Invalid

Bug description:
  Description:
  ==========
  1. Correct ethernet configurations are not set up after bootup , so accessing internet does not work.
  2. After Manual configurations browsing  works.
  eg:
  after bootup
  #netcfg
  eth0     UP                               192.168.0.188/24  0x00001043 32:eb:18:e4:3f:f3
  Expected: here the IP should be in the range (192.168.1.xx) as dhcp assigns ip in that range.

  reassing ip to device.
  #netcfg eth0 dhcp
  eth0     UP                                 192.168.1.7/24  0x00001043 0a:95:f2:8e:f4:ec
  Correct ip now , but Browsing still doesn't work works.
  Still dns settings needs to be done. see below

  #setprop net.dns1 8.8.8.8
  Now browsing works(can open google.com using browser app)

  Reproducible:
  ===========
  Yes, 5/5 time

  IMPACT:
  ========
  Can't boot up and do internet browsing straightaway.

  Steps:
  ==========
  1. Connect device with ethernet cable with proper internet connection. Device connected behind a router.
  2. Bootup device and check network configurations via netcfg command.
  Issue 1- device does not get proper ip as expected , gets ip 192.168.0.xx instead of 192.168.1.xx
  3. reassigning ip via dhcp "#netcfg eth0 dhcp '
  Issue2- now device gets ip in correct range (192.168.1.xx) - buts still dns configurations need to be done to enable browsing
  4. 'setprop net.dns1 8.8.8.8' - now browsing works.

  Hardware:
  ==========
  Pandaboard 4430
  USB Mouse connected
  HDMI out to TV
  8GB SD card

  Software:
  ==========
  https://android-build.linaro.org/builds/~linaro-android/landing-panda-12.01-release/#build=3

  
  Logs:
  ======
  serial logs attached.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-android/+bug/920872/+subscriptions