tiomap-dev team mailing list archive

[warmcat <1039941@xxxxxxxxxxxxxxxxxx>]

Some of the firmware is slightly different on my side, not sure which
ones it is actually using

529d85a8b24131fe65c75a273c5efa01  TIInit_7.2.31.bts
3c94a2f7c3173d8811009307ec140195  TIInit_7.6.15.bts
48ea42d9b8ec6a6cff606cfc07c4f05c  wl1271-fw-2.bin
238586509daf93b9a19eb2658945f8c0  wl1271-fw-ap.bin
094517dc9a2b67132dda0692ce0bfa1b  wl1271-fw.bin
170b227c9cc5f3020ae58ce25eb93f21  wl1271-nvs.bin
f0fdc227f7f90f016c4fbb4fde6c6fae  wl127x-fw-3.bin
db8a232eb9585b1411aa2e13d8f2d0a0  wl127x-fw-4-mr.bin
e6e5fd20ddc3d62f85b85a326b413113  wl127x-fw-4-plt.bin
c34980c7073bcb979630eae678b06aa7  wl127x-fw-4-sr.bin
03f7bf217391fbf8c403397deffd229e  wl127x-fw-plt-3.bin
170b227c9cc5f3020ae58ce25eb93f21  wl127x-nvs.bin
348e52d906d53d2c981600a73f950750  wl128x-fw-3.bin
6ea2c3105be37a4ea667a53fd0cfa44b  wl128x-fw-4-mr.bin
84fd299867b22a0b53faef9b6849bb2e  wl128x-fw-4-plt.bin
ecc4349c039367b07e2d95f63ea25e3b  wl128x-fw-4-sr.bin
31350833555fec024902ea054065d0bd  wl128x-fw-ap.bin
8dfbf6a59fa2be51a6124a00be57368b  wl128x-fw-plt-3.bin
93222394f055b31546f47ee16a92e004  wl128x-fw.bin
387ee1359ecac0e1546290cec4892a31  wl128x-nvs.bin
170b227c9cc5f3020ae58ce25eb93f21  wl12xx-nvs.bin

I attach a tarball in case it's anything to do with anything.

Previously IIRC patches were needed on wpa_supplicant for Android, did
that need go away?

You might also try reducing wpa_supplicant.conf to just the passphrase
stanza, that's all I had in mine when testing with Ubuntu above.

** Attachment added: "Firmware workable on Ubuntu"
   https://bugs.launchpad.net/linaro-android/+bug/1039941/+attachment/3305368/+files/ti-connectivity.tar.gz

-- 
You received this bug notification because you are a member of TI OMAP
Developers, which is subscribed to linaro-landing-team-ti.
https://bugs.launchpad.net/bugs/1039941

Title:
  WIFI not working with panda android jellybean tracking-blob build

Status in Linaro Android:
  New
Status in Linaro Texas Instruments Landing Team:
  Invalid

Bug description:
  observed with panda android jellybean tracking-blob build 
  https://android-build.linaro.org/builds/~linaro-android/panda-jb-gcc47-tilt-tracking-blob/#build=28

  
  Turning wifi on and searching for access point works fine but it fails to connect to any access point. 

  root@android:/ # [  977.788970] wl12xx: loaded
  [  978.376678] wl12xx: firmware booted (Rev 6.3.5.0.98)
  [  978.401153] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  [  980.303466] wl12xx: Association completed.
  [  980.336120] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  [  980.342315] wl12xx_driver wl12xx: wlan0: failed to set key 0
  [ 1010.873565] cfg80211: Calling CRDA to update world regulatory domain
  [ 1012.303466] wl12xx: Association completed.
  [ 1012.328308] wl12xx_driver wl12xx: wlan0: failed to set key 0
  [ 1012.334960] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-android/+bug/1039941/+subscriptions