touch-packages team mailing list archive
-
touch-packages team
-
Mailing list archive
-
Message #14763
[Bug 1317552] Re: usb modem doesn't recognized by system until wired network connected
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: network-manager (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1317552
Title:
usb modem doesn't recognized by system until wired network connected
Status in “network-manager” package in Ubuntu:
Confirmed
Bug description:
I have an usb 3g modem huawei, configured as standalone network
device. When I connect it, dmesg shows some error messages, but
nothing happens. After connect and futher disconnect wired network
(eth0), it succesful recognized by the system as eth1 device and all
works fine. Problem is that sometimes I have no wired network to start
usb-3g connection this way.
Part of dmesg with connect/disconnect manipulations
[ 27.606224] init: libvirt-bin main process (979) terminated with status 127
[ 27.606239] init: libvirt-bin main process ended, respawning
[ 27.915799] r8169 0000:01:00.0 eth0: link down
[ 27.915869] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.916229] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.938186] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.941688] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.566084] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=0036
[ 28.566089] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 28.775155] init: plymouth-upstart-bridge main process ended, respawning
[ 34.989561] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 55.380263] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[ 55.397190] usb 3-3: New USB device found, idVendor=12d1, idProduct=1f01
[ 55.397202] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 55.397207] usb 3-3: Product: HUAWEI HiLink
[ 55.397212] usb 3-3: Manufacturer: HUAWEI
[ 55.465739] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 55.465795] scsi7 : usb-storage 3-3:1.0
[ 55.465865] usbcore: registered new interface driver usb-storage
[ 56.464794] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 56.472835] sr1: scsi-1 drive
[ 56.472989] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 56.473080] sr 7:0:0:0: Attached scsi generic sg3 type 5
[ 56.558838] audit_printk_skb: 156 callbacks suppressed
[ 56.558842] type=1400 audit(1399561168.962:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2017 comm="apparmor_parser"
[ 56.558850] type=1400 audit(1399561168.962:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2017 comm="apparmor_parser"
[ 56.559369] type=1400 audit(1399561168.962:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2017 comm="apparmor_parser"
[ 56.638660] Buffer I/O error on device sr1, logical block 0
[ 56.638668] Buffer I/O error on device sr1, logical block 0
[ 56.638685] Buffer I/O error on device sr1, logical block 0
[ 56.638693] Buffer I/O error on device sr1, logical block 0
[ 56.638701] Buffer I/O error on device sr1, logical block 1
[ 56.638708] Buffer I/O error on device sr1, logical block 1
[ 56.638716] Buffer I/O error on device sr1, logical block 512
[ 56.640490] systemd-udevd[2001]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 56.640501] systemd-udevd[2001]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 56.651401] systemd-udevd[1987]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 56.651427] systemd-udevd[1987]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 107.810564] usb 3-3: USB disconnect, device number 3
[ 116.952712] usb 3-3: new high-speed USB device number 4 using xhci_hcd
[ 116.969698] usb 3-3: New USB device found, idVendor=12d1, idProduct=1f01
[ 116.969709] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 116.969715] usb 3-3: Product: HUAWEI HiLink
[ 116.969720] usb 3-3: Manufacturer: HUAWEI
[ 116.971391] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 116.971653] scsi8 : usb-storage 3-3:1.0
[ 117.969336] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 117.971006] sr1: scsi-1 drive
[ 117.971389] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 117.974632] sr 8:0:0:0: Attached scsi generic sg3 type 5
[ 118.063825] quiet_error: 1 callbacks suppressed
[ 118.063836] Buffer I/O error on device sr1, logical block 9
[ 118.063849] Buffer I/O error on device sr1, logical block 9
[ 118.063943] Buffer I/O error on device sr1, logical block 0
[ 118.063951] Buffer I/O error on device sr1, logical block 0
[ 118.063970] Buffer I/O error on device sr1, logical block 2
[ 118.063978] Buffer I/O error on device sr1, logical block 2
[ 118.063991] Buffer I/O error on device sr1, logical block 0
[ 118.064004] Buffer I/O error on device sr1, logical block 0
[ 118.064021] Buffer I/O error on device sr1, logical block 0
[ 118.064036] Buffer I/O error on device sr1, logical block 1
[ 118.069131] systemd-udevd[2224]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 118.069143] systemd-udevd[2224]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 118.073776] systemd-udevd[2224]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 118.073788] systemd-udevd[2224]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 185.892567] r8169 0000:01:00.0 eth0: link up
[ 185.892589] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 189.653532] r8169 0000:01:00.0 eth0: link down
[ 194.156060] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 214.512890] usb 3-3: USB disconnect, device number 4
[ 224.968105] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[ 224.985171] usb 3-3: New USB device found, idVendor=12d1, idProduct=1f01
[ 224.985182] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 224.985188] usb 3-3: Product: HUAWEI HiLink
[ 224.985192] usb 3-3: Manufacturer: HUAWEI
[ 224.987223] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 224.987477] scsi9 : usb-storage 3-3:1.0
[ 225.984189] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 225.985842] sr1: scsi-1 drive
[ 225.986758] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 225.989684] sr 9:0:0:0: Attached scsi generic sg3 type 5
[ 226.092064] quiet_error: 4 callbacks suppressed
[ 226.092076] Buffer I/O error on device sr1, logical block 8
[ 226.092089] Buffer I/O error on device sr1, logical block 8
[ 226.092153] Buffer I/O error on device sr1, logical block 0
[ 226.092161] Buffer I/O error on device sr1, logical block 0
[ 226.092180] Buffer I/O error on device sr1, logical block 2
[ 226.092187] Buffer I/O error on device sr1, logical block 2
[ 226.092200] Buffer I/O error on device sr1, logical block 0
[ 226.092214] Buffer I/O error on device sr1, logical block 0
[ 226.092230] Buffer I/O error on device sr1, logical block 0
[ 226.092246] Buffer I/O error on device sr1, logical block 1
[ 226.095748] systemd-udevd[2501]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 226.095772] systemd-udevd[2501]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 226.254225] usb 3-3: USB disconnect, device number 5
[ 226.395979] systemd-udevd[2501]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 226.396004] systemd-udevd[2501]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 226.994443] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 227.011625] usb 3-3: New USB device found, idVendor=12d1, idProduct=14db
[ 227.011637] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 227.011644] usb 3-3: Product: HUAWEI HiLink
[ 227.011648] usb 3-3: Manufacturer: HUAWEI
[ 227.015179] cdc_ether 3-3:1.0 eth1: register 'cdc_ether' at usb-0000:00:14.0-3, CDC Ethernet Device, 58:2c:80:13:92:63
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: network-manager 0.9.8.8-0ubuntu7
ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9
Uname: Linux 3.13.0-24-generic x86_64
ApportVersion: 2.14.1-0ubuntu3
Architecture: amd64
Date: Fri May 9 00:08:31 2014
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
InstallationDate: Installed on 2014-04-27 (10 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
IpRoute:
default via 192.168.1.1 dev eth0 proto static
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.103 metric 1
192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.100 metric 1
NetworkManager.state:
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
ProcEnviron:
LANGUAGE=ru
TERM=xterm
PATH=(custom, no user)
LANG=ru_RU.UTF-8
SHELL=/bin/bash
SourcePackage: network-manager
UpgradeStatus: No upgrade log present (probably fresh install)
mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2014-05-04T16:25:42.688173
nmcli-dev:
DEVICE TYPE STATE DBUS-PATH
eth1 802-3-ethernet connected /org/freedesktop/NetworkManager/Devices/2
wlan0 802-11-wireless disconnected /org/freedesktop/NetworkManager/Devices/1
eth0 802-3-ethernet connected /org/freedesktop/NetworkManager/Devices/0
nmcli-nm:
RUNNING VERSION STATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN
running 0.9.8.8 connected enabled enabled enabled enabled disabled
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1317552/+subscriptions