touch-packages team mailing list archive
-
touch-packages team
-
Mailing list archive
-
Message #15133
[Bug 1366152] Re: System crash when Vasco-card-reader is plugged in at powerup
Thank you Ludovic for your quick response.
I generated to log-files,
LogCardReader@xxxxxxxxxxx in case it goes wrong (only when the card-reader is plugged in while the computer is starting-up or rebooting
LogCardReaderOK.txt after the crash - removed the reader and sudo
service pcscd start
/usr/sbin/pcscd --version
pcsc-lite version 1.8.10.
Copyright (C) 1999-2002 by David Corcoran <corcoran@xxxxxxxxxxxx>.
Copyright (C) 2001-2011 by Ludovic Rousseau <ludovic.rousseau@xxxxxxx>.
Copyright (C) 2003-2004 by Damien Sauveron <sauveron@xxxxxxxx>.
Report bugs to <muscle@xxxxxxxxxxxxxxxxxxxx>.
Enabled features: Linux x86_64-pc-linux-gnu serial usb libudev usbdropdir=/usr/lib/pcsc/drivers ipcdir=/var/run/pcscd configdir=/etc/reader.conf.d
pcsc_scan (when the reader is ok)
PC/SC device scanner
V 1.4.22 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@xxxxxxx>
Compiled with PC/SC lite version: 1.8.10
Using reader plug'n play mechanism
Scanning present readers...
0: VASCO DP905v1.1 00 00
Sat Sep 6 10:18:48 2014
Reader 0: VASCO DP905v1.1 00 00
Card state: Card removed,
apt-cache policy pcscd
pcscd:
Geïnstalleerd: 1.8.10-1ubuntu1
Kandidaat: 1.8.10-1ubuntu1
Versietabel:
*** 1.8.10-1ubuntu1 0
500 http://be.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages
100 /var/lib/dpkg/status
Middleware = eid-mw
low-level support for Belgian Electronic Identity Card
apt-cache policy eid-mw
eid-mw:
Geïnstalleerd: 4.0.6r1620-0trusty1
Kandidaat: 4.0.6r1620-0trusty1
Versietabel:
*** 4.0.6r1620-0trusty1 0
500 http://files.eid.belgium.be/debian/ trusty/main amd64 Packages
100 /var/lib/dpkg/status
** Attachment added: "LogCardReader@xxxxxxxxxxx"
https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1366152/+attachment/4196927/+files/LogCardReader%40Powerup.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pcsc-lite in Ubuntu.
https://bugs.launchpad.net/bugs/1366152
Title:
System crash when Vasco-card-reader is plugged in at powerup
Status in “pcsc-lite” package in Ubuntu:
New
Bug description:
I'm using VASCO Data Security International Digipass 905 SmartCard Reader which is working fine. However if the device is plugged in at power-up, the device isn't handled well. Although the device is in the ilisted usb-devices, pcsc-scan doesn't find the device at all (Which is normal as the green-led is going out after the kernel starts). If one tries to remove the card-reader,
a system-crash happens. After that the pcscd-service seems to be halted :
pcsc_scan
PC/SC device scanner
V 1.4.22 (c) 2001-2011, Ludovic Rousseau <ludovic.rousseau@xxxxxxx>
Compiled with PC/SC lite version: 1.8.10
SCardEstablishContext: Service not available.
One can recover from this problem by
1. Unplugging the reader
2. Manually starting the service again by sudo service pcscd start
3. Plugging back the reader in (green led stays on, red led goes on when a card is put in)
The bug is not related to a 64-bit architecture as it happens also
with 32-bit machines.
Info about the device
Bus 001 Device 005: ID 1a44:0001 VASCO Data Security International Digipass 905 SmartCard Reader
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1a44 VASCO Data Security International
idProduct 0x0001 Digipass 905 SmartCard Reader
bcdDevice 1.02
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 11 Chip/SmartCard
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
ChipCard Interface Descriptor:
bLength 54
bDescriptorType 33
bcdCCID 1.00
nMaxSlotIndex 0
bVoltageSupport 3 5.0V 3.0V
dwProtocols 3 T=0 T=1
dwDefaultClock 3700
dwMaxiumumClock 3700
bNumClockSupported 1
dwDataRate 9946 bps
dwMaxDataRate 318280 bps
bNumDataRatesSupp. 53
dwMaxIFSD 254
dwSyncProtocols 00000007 2-wire 3-wire I2C
dwMechanical 00000000
dwFeatures 000404BE
Auto configuration based on ATR
Auto activation on insert
Auto voltage selection
Auto clock change
Auto baud rate change
Auto PPS made by CCID
Auto IFSD exchange
Short and extended APDU level exchange
dwMaxCCIDMsgLen 272
bClassGetResponse echo
bClassEnvelope echo
wlcdLayout none
bPINSupport 0
bMaxCCIDBusySlots 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 0
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: pcscd 1.8.10-1ubuntu1
ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6
Uname: Linux 3.13.0-35-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.3
Architecture: amd64
CurrentDesktop: Unity
Date: Fri Sep 5 19:55:38 2014
InstallationDate: Installed on 2014-05-10 (118 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
SourcePackage: pcsc-lite
UpgradeStatus: No upgrade log present (probably fresh install)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pcsc-lite/+bug/1366152/+subscriptions
References
