touch-packages team mailing list archive

[Adam Conrad <adconrad@xxxxxxx>]

You can safely ignore the previous comment, it was made by a "helpful"
bot.

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to kmod in Ubuntu.
https://bugs.launchpad.net/bugs/1378648

Title:
  ISST-KVM:R2-0:No login prompt displayed on FB console after Ubuntu
  14.10 installation

Status in “kmod” package in Ubuntu:
  Confirmed
Status in “linux” package in Ubuntu:
  Triaged

Bug description:
  == Comment: #0 - Richard M. Scheller <rschelle@xxxxxxxxxx> - 2014-10-06 13:42:47 ==
  ---Problem Description---
  After installing Ubuntu 14.10 (3.16.0-20-generic kernel) using a qemu virtual VGA framebuffer console and rebooting the installed system, there is no login prompt displayed on the fb console.  This is a regression from 14.04.1, where the login prompt is displayed on the console.  

  (Note that this is *not* related to IBM bug#113591/LauchPad
  bug#1346851, which has been fixed in the latest daily builds.)

  The OS installation completes without any errors, then the guest reboots from the installed virtual disk.  The guest comes up without any problems (it is possible to ssh into the guest) but no login prompt is displayed on the fb console.
   
  Machine Type = 8247-22L (PowerKVM guest) 
   
  ---Steps to Reproduce---
   Configure guest with framebuffer console and USB keyboard/mouse and install through that interface.
   
  ---uname output---
  Linux netg7 3.16.0-20-generic #27-Ubuntu SMP Wed Oct 1 17:24:38 UTC 2014 ppc64le ppc64le ppc64le GNU/Linux
   
  ---Debugger---
  A debugger is not configured
   
  Install ISO Information: 2014-10-06 daily build (network install)
   
  Install disk info: n/a
   
  Install method: TFTP boot of kernel/initrd from local server, then direct download from ports.ubuntu.com
   
  == Comment: #4 - Richard M. Scheller <rschelle@xxxxxxxxxx> - 2014-10-06 14:34:43 ==
  I should also point out that there is no login prompt displayed on the virtual serial console (/dev/hvc0) either.  Here is a list of the getty processes which are started on reboot:

  root@netg7:~# ps -ef|grep getty|grep -v grep
  root       869     1  0 12:23 tty4     00:00:00 /sbin/getty -8 38400 tty4
  root       871     1  0 12:23 tty5     00:00:00 /sbin/getty -8 38400 tty5
  root       874     1  0 12:23 tty2     00:00:00 /sbin/getty -8 38400 tty2
  root       875     1  0 12:23 tty3     00:00:00 /sbin/getty -8 38400 tty3
  root       881     1  0 12:23 tty6     00:00:00 /sbin/getty -8 38400 tty6
  root      1026     1  0 12:23 tty1     00:00:00 /sbin/getty -8 38400 tty1
  root@netg7:~#

  == Comment: #10 - Richard M. Scheller <rschelle@xxxxxxxxxx> - 2014-10-06 17:31:23 ==
  OK, I think I'm getting closer to the root cause.  I'm pretty sure it's the framebuffer device.

  These are the related kernel messages from Ubuntu 14.04.1 (netg9):

  root@netg9:~# dmesg|egrep -i 'buffer|offb|vga'
  [    0.099978] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
  [    0.099979] vgaarb: loaded
  [    0.099980] vgaarb: bridge control possible 0000:00:05.0
  [    0.581438] Using unsupported 800x600 vga at 100a0000000, depth=32, pitch=3200
  [    0.583419] Console: switching to colour frame buffer device 100x37
  [    0.584748] fb0: Open Firmware frame buffer device on /pci@800000020000000/vga@5
  root@netg9:~# 

  And here are the related messages from 14.10 (netg7):

  root@netg7:~# dmesg|egrep -i 'buffer|offb|vga'
  [    0.136665] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
  [    0.136701] vgaarb: loaded
  [    0.136733] vgaarb: bridge control possible 0000:00:05.0
  [    0.580147] Using unsupported 800x600 vga at 100a0000000, depth=32, pitch=3200
  [    0.583407] Console: switching to colour frame buffer device 100x37
  [    0.585721] fb0: Open Firmware frame buffer device on /pci@800000020000000/vga@5
  [    4.264808] fb: switching to bochsdrmfb from OFfb vga
  [    4.266985] [drm:bochs_hw_init] *ERROR* Cannot request framebuffer
  root@netg7:~# 

  Everything looks pretty much the same on both guests until 14.10 tries
  to switch to the "bochsdrmfb" device.  I'm going to assume that device
  only works on x86.

  On 14.10, the kernel has a new driver that doesn't exist on 14.04:

  14.10:
  root@netg7:~# grep -i bochs /boot/config-3.16.0-20-generic 
  CONFIG_DRM_BOCHS=m
  root@netg7:~# 

  14.04.1:
  root@netg9:~# grep -i bochs /boot/config-3.13.0-36-generic 
  root@netg9:~#

  == Comment: #11 - Richard M. Scheller <rschelle@xxxxxxxxxx> - 2014-10-06 18:28:25 ==
  I disabled the bochs framebuffer on 14.10 by adding the following line to /etc/modprobe.d/blacklist.conf:

  blacklist bochs-drm

  On the next guest reboot, the login prompt appeared on the VGA console
  as expected and I was able to login interactively through the Kimchi
  web VNC interface.

  So, the problem is definitely the bochs DRM device. I don't know if
  the appropriate long-term solution is to fix the boch-drm driver or if
  it should simply be disabled, but one or the other needs to be done
  for 14.10 and future releases.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/kmod/+bug/1378648/+subscriptions