touch-packages team mailing list archive
-
touch-packages team
-
Mailing list archive
-
Message #27469
[Bug 1382462] Re: Desktop/windows painted incorrectly in dual monitor configuration
** Description changed:
My setup: Dell M4600 laptop with Dell U3011 2560x1600 monitor attached
to DisplayPort.
I was using Nvidia 331.38 prioprietary driver for quite a long time with
Ubuntu 14.04 LTS and everything worked perfectly. Today I upgraded to
Ubuntu 14.10, which comes with Nvidia 331.89 and observed the following
problem:
1. When I boot up the computer with the monitor connected, the login
screen looks fine. Both displays get detected properly and resolutions
are ok (1920x1080 on the builtin laptop display and 2560x1600 on U3011)
and screen contents scaled properly.
2. Then I log into my account, for 3 seconds U3011 displays some rubbish
(but it was always like that) and when it finally logs in, it displays
everything stretched horizontally through both my screens. It looks as
if it tried to paint the contents of a single display on two of them, by
stretching the content horizontally, so everything (icons, windows,
wallpaper) has wrong aspect-ratio. Funny, the top status bar seem to
render correctly. Physical resolution of both screens is ok. I'll attach
a photo, because it is hard to describe how it looks.
3. I cannot use system in this state - mouse click position seems to not
be synchronized with what's on the display - e.g. I can start
applications, but then they don't react to mouseclicks.
However: booting up without the second display connected, logging in and
*then* connecting the second display works fine.
If I boot up with connected monitor and log in (desktop distorted), disconnecting and connecting monitor does *not* help. After disconnecting the U3011, the builtin display is painted ok, but after connecting, it returns back to the incorrect state and both are rendered incorrectly.
- The only thing that helps recovering from this state seems to be disconnecting the second monitor, reboot, loggin in and then connecting.
+ The only thing that helps recovering from this state seems to be disconnecting the second monitor, reboot, logging in and then connecting.
+
+ Suspending to memory and waking up does not change the layout of the
+ screen (neither fixes the "broken" one nor destroys the "good" one).
BTW: I'm using a docking station - not sure if it is related - if you
think it might be, I can try with connecting the monitor directly.
-
I tried deleting ~/.compiz and ~/.config/compiz-1 directories but the problem remains.
I also tried to go into the Displays configuration when everything is ok, apply the settings there (without any changes) in hope it will persist them somehow, but after restart it is broken again.
I also tried reinstalling nvidia 331.89 drivers, because it complained
about not being able to install nvidia-uvm during the upgrade process
(reported separately), and now all nvidia packages installed cleanly.
Before that I also got rid of all the ppa mainline kernels I had, just
in case they mess something up.
I remember the same problem happened on Ubuntu 14.04 when I tried to
upgrade nvidia from ppa/xorg-edgers to 331.89, but then the easy
workaround was to downgrade back to official 331.38. Now I have no
choice :(
ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: xorg 1:7.7+7ubuntu2
ProcVersionSignature: Ubuntu 3.16.0-22.29-generic 3.16.4
Uname: Linux 3.16.0-22-generic x86_64
NonfreeKernelModules: nvidia
.proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0'
.proc.driver.nvidia.registry: Binary: ""
.proc.driver.nvidia.version:
NVRM version: NVIDIA UNIX x86_64 Kernel Module 331.89 Tue Jul 1 13:30:18 PDT 2014
GCC version: gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6)
.tmp.unity.support.test.0:
ApportVersion: 2.14.7-0ubuntu7
Architecture: amd64
CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
CurrentDesktop: Unity
CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied
Date: Fri Oct 17 11:02:50 2014
DistUpgraded: 2014-10-17 10:20:38,145 DEBUG enabling apt cron job
DistroCodename: utopic
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes, including running git bisection searches
GraphicsCard:
Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:04a3]
NVIDIA Corporation GF108GLM [Quadro 1000M] [10de:0dfa] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:14a3]
InstallationDate: Installed on 2012-03-21 (939 days ago)
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
MachineType: Dell Inc. Precision M4600
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-22-generic root=UUID=37dce0bb-1e68-402b-8cba-78a6e04193de ro quiet splash reboot=pci acpi_backlight=vendor resume=UUID=4b9dc764-1ab9-4d9f-b661-1561bfe83648
SourcePackage: xorg
Symptom: display
UpgradeStatus: Upgraded to utopic on 2014-10-17 (0 days ago)
dmi.bios.date: 10/18/2011
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A08
dmi.board.name: 08V9YG
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 9
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA08:bd10/18/2011:svnDellInc.:pnPrecisionM4600:pvr01:rvnDellInc.:rn08V9YG:rvrA00:cvnDellInc.:ct9:cvr:
dmi.product.name: Precision M4600
dmi.product.version: 01
dmi.sys.vendor: Dell Inc.
version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
version.ia32-libs: ia32-libs 20090808ubuntu36
version.libdrm2: libdrm2 2.4.56+git20140920.77dce9a0-0ubuntu0ricotz~trusty
version.libgl1-mesa-dri: libgl1-mesa-dri 10.4.0~git20140925.23247e80-0ubuntu0ricotz~trusty
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 10.4.0~git20140925.23247e80-0ubuntu0ricotz~trusty
version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1382462
Title:
Desktop/windows painted incorrectly in dual monitor configuration
Status in “xorg” package in Ubuntu:
New
Bug description:
My setup: Dell M4600 laptop with Dell U3011 2560x1600 monitor attached
to DisplayPort.
I was using Nvidia 331.38 prioprietary driver for quite a long time
with Ubuntu 14.04 LTS and everything worked perfectly. Today I
upgraded to Ubuntu 14.10, which comes with Nvidia 331.89 and observed
the following problem:
1. When I boot up the computer with the monitor connected, the login
screen looks fine. Both displays get detected properly and resolutions
are ok (1920x1080 on the builtin laptop display and 2560x1600 on
U3011) and screen contents scaled properly.
2. Then I log into my account, for 3 seconds U3011 displays some
rubbish (but it was always like that) and when it finally logs in, it
displays everything stretched horizontally through both my screens. It
looks as if it tried to paint the contents of a single display on two
of them, by stretching the content horizontally, so everything (icons,
windows, wallpaper) has wrong aspect-ratio. Funny, the top status bar
seem to render correctly. Physical resolution of both screens is ok.
I'll attach a photo, because it is hard to describe how it looks.
3. I cannot use system in this state - mouse click position seems to
not be synchronized with what's on the display - e.g. I can start
applications, but then they don't react to mouseclicks.
However: booting up without the second display connected, logging in
and *then* connecting the second display works fine.
If I boot up with connected monitor and log in (desktop distorted), disconnecting and connecting monitor does *not* help. After disconnecting the U3011, the builtin display is painted ok, but after connecting, it returns back to the incorrect state and both are rendered incorrectly.
The only thing that helps recovering from this state seems to be disconnecting the second monitor, reboot, logging in and then connecting.
Suspending to memory and waking up does not change the layout of the
screen (neither fixes the "broken" one nor destroys the "good" one).
BTW: I'm using a docking station - not sure if it is related - if you
think it might be, I can try with connecting the monitor directly.
I tried deleting ~/.compiz and ~/.config/compiz-1 directories but the problem remains.
I also tried to go into the Displays configuration when everything is ok, apply the settings there (without any changes) in hope it will persist them somehow, but after restart it is broken again.
I also tried reinstalling nvidia 331.89 drivers, because it complained
about not being able to install nvidia-uvm during the upgrade process
(reported separately), and now all nvidia packages installed cleanly.
Before that I also got rid of all the ppa mainline kernels I had, just
in case they mess something up.
I remember the same problem happened on Ubuntu 14.04 when I tried to
upgrade nvidia from ppa/xorg-edgers to 331.89, but then the easy
workaround was to downgrade back to official 331.38. Now I have no
choice :(
ProblemType: Bug
DistroRelease: Ubuntu 14.10
Package: xorg 1:7.7+7ubuntu2
ProcVersionSignature: Ubuntu 3.16.0-22.29-generic 3.16.4
Uname: Linux 3.16.0-22-generic x86_64
NonfreeKernelModules: nvidia
.proc.driver.nvidia.gpus.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/0'
.proc.driver.nvidia.registry: Binary: ""
.proc.driver.nvidia.version:
NVRM version: NVIDIA UNIX x86_64 Kernel Module 331.89 Tue Jul 1 13:30:18 PDT 2014
GCC version: gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6)
.tmp.unity.support.test.0:
ApportVersion: 2.14.7-0ubuntu7
Architecture: amd64
CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins'
CompositorRunning: compiz
CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0'
CompositorUnredirectFSW: true
CurrentDesktop: Unity
CurrentDmesg: Error: command ['sh', '-c', 'dmesg | comm -13 --nocheck-order /var/log/dmesg -'] failed with exit code 1: comm: /var/log/dmesg: Permission denied
Date: Fri Oct 17 11:02:50 2014
DistUpgraded: 2014-10-17 10:20:38,145 DEBUG enabling apt cron job
DistroCodename: utopic
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes, including running git bisection searches
GraphicsCard:
Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:04a3]
NVIDIA Corporation GF108GLM [Quadro 1000M] [10de:0dfa] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:14a3]
InstallationDate: Installed on 2012-03-21 (939 days ago)
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012)
MachineType: Dell Inc. Precision M4600
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-22-generic root=UUID=37dce0bb-1e68-402b-8cba-78a6e04193de ro quiet splash reboot=pci acpi_backlight=vendor resume=UUID=4b9dc764-1ab9-4d9f-b661-1561bfe83648
SourcePackage: xorg
Symptom: display
UpgradeStatus: Upgraded to utopic on 2014-10-17 (0 days ago)
dmi.bios.date: 10/18/2011
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A08
dmi.board.name: 08V9YG
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 9
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA08:bd10/18/2011:svnDellInc.:pnPrecisionM4600:pvr01:rvnDellInc.:rn08V9YG:rvrA00:cvnDellInc.:ct9:cvr:
dmi.product.name: Precision M4600
dmi.product.version: 01
dmi.sys.vendor: Dell Inc.
version.compiz: compiz 1:0.9.12+14.10.20140918-0ubuntu1
version.ia32-libs: ia32-libs 20090808ubuntu36
version.libdrm2: libdrm2 2.4.56+git20140920.77dce9a0-0ubuntu0ricotz~trusty
version.libgl1-mesa-dri: libgl1-mesa-dri 10.4.0~git20140925.23247e80-0ubuntu0ricotz~trusty
version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A
version.libgl1-mesa-glx: libgl1-mesa-glx 10.4.0~git20140925.23247e80-0ubuntu0ricotz~trusty
version.nvidia-graphics-drivers: nvidia-graphics-drivers N/A
version.xserver-xorg-core: xserver-xorg-core 2:1.16.0-1ubuntu1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2
version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1382462/+subscriptions
References
