← Back to team overview

touch-packages team mailing list archive

[Bug 1366418] Re: Bluetooth BCM43142A0 doesn’t work

 

The firmware should be added from Windows driver.

** Also affects: linux-firmware (Ubuntu)
   Importance: Undecided
       Status: New

** Changed in: linux-firmware (Ubuntu)
       Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1366418

Title:
  Bluetooth BCM43142A0 doesn’t work

Status in bluez package in Ubuntu:
  Confirmed
Status in linux package in Ubuntu:
  Fix Committed
Status in linux-firmware package in Ubuntu:
  Confirmed

Bug description:
  I’ve installed ubuntu 14.04 and my computer’s builtin bluetooth
  (computer is an Asus x550ln) doesn’t work at all. Bluetooth is not
  displayed in the menu bar, if I open the bluetooth UI and switch on,
  nothing happens and the result of “hcitool dev” is empty.

  I have tried to install the windows driver with ndiswrapper, and the
  bluetooth device seems to be detected as an usb bluetooth device but
  still not working. I then add the device to the bluetooth usb device
  and was able to activate bluetooth in the UI but it does not detect
  any other devices (I’ve tested with a smartphone).

  The driver I have installed can be found in asus page =>
  http://www.asus.com/fr/Notebooks_Ultrabooks/X550LN/HelpDesk_Download/
  Select Windows OS, then “bluetooth” section, take the Broadcom driver
  (should be the first one).

  If you extract this archive, you will find a file named “bcbtums-
  win8x64-brcm.inf” which I installed using the following command:

  ndiswrapper -i bcbtums-win8x64-brcm.inf

  Then, the result of “ndiswrapper -l” is:

  bcbtums-win8x64-brcm : driver installed
  	device (04CA:2006) present

  in usb-devices, I find a device which was not present before
  installation (I might have activated btusb before on this paste):

  T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
  D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=04ca ProdID=2006 Rev=01.12
  S:  Manufacturer=Broadcom Corp
  S:  Product=BCM43142A0
  S:  SerialNumber=B8EE6593D989
  C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
  I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

  then, “echo "04ca 2006" > /sys/bus/usb/drivers/btusb/new_id”, and I
  can switch usb on, but no device will be detected and I’ve found this
  in the dmesg:

  [2200.843126] Bluetooth: hci0 command 0x1003 tx timeout

  which looks pretty much like a “bluetooth not working” message which I
  don’t understand in details.

  I leave here my full dmesg:

  [    0.253889] NetLabel:  domain hash size = 128
  [    0.253890] NetLabel:  protocols = UNLABELED CIPSOv4
  [    0.253901] NetLabel:  unlabeled traffic allowed by default
  [    0.253959] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  [    0.253965] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  [    0.255995] Switched to clocksource hpet
  [    0.260468] AppArmor: AppArmor Filesystem Enabled
  [    0.260488] pnp: PnP ACPI init
  [    0.260500] ACPI: bus type PNP registered
  [    0.260592] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  [    0.260596] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  [    0.260642] pnp 00:01: [dma 4]
  [    0.260658] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  [    0.260678] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  [    0.260782] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  [    0.260924] system 00:04: [io  0x0680-0x069f] has been reserved
  [    0.260927] system 00:04: [io  0xffff] has been reserved
  [    0.260928] system 00:04: [io  0xffff] has been reserved
  [    0.260930] system 00:04: [io  0xffff] has been reserved
  [    0.260932] system 00:04: [io  0x1c00-0x1cfe] has been reserved
  [    0.260934] system 00:04: [io  0x1d00-0x1dfe] has been reserved
  [    0.260935] system 00:04: [io  0x1e00-0x1efe] has been reserved
  [    0.260937] system 00:04: [io  0x1f00-0x1ffe] has been reserved
  [    0.260939] system 00:04: [io  0x1800-0x18fe] could not be reserved
  [    0.260941] system 00:04: [io  0x164e-0x164f] has been reserved
  [    0.260943] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.260969] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
  [    0.261012] system 00:06: [io  0x1854-0x1857] has been reserved
  [    0.261014] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  [    0.261059] system 00:07: [io  0x04d0-0x04d1] has been reserved
  [    0.261061] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261089] system 00:08: [io  0x0240-0x0259] has been reserved
  [    0.261091] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261144] pnp 00:09: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
  [    0.261179] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
  [    0.261509] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261757] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
  [    0.261759] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
  [    0.261761] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
  [    0.261763] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
  [    0.261765] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
  [    0.261766] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
  [    0.261768] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
  [    0.261770] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
  [    0.261772] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
  [    0.261774] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
  [    0.261776] system 00:0c: [mem 0xf7fdf000-0xf7fdffff] has been reserved
  [    0.261778] system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
  [    0.261780] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261857] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.262166] pnp: PnP ACPI: found 14 devices
  [    0.262168] ACPI: bus type PNP unregistered
  [    0.268251] pci 0000:00:1c.0: PCI bridge to [bus 01]
  [    0.268263] pci 0000:00:1c.2: PCI bridge to [bus 02]
  [    0.268266] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
  [    0.268270] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
  [    0.268277] pci 0000:00:1c.3: PCI bridge to [bus 03]
  [    0.268282] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
  [    0.268289] pci 0000:00:1c.4: PCI bridge to [bus 04]
  [    0.268291] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
  [    0.268295] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
  [    0.268299] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
  [    0.268305] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  [    0.268307] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  [    0.268308] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  [    0.268310] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
  [    0.268312] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
  [    0.268313] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
  [    0.268315] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
  [    0.268316] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
  [    0.268318] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
  [    0.268320] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
  [    0.268322] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
  [    0.268323] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
  [    0.268325] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
  [    0.268327] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
  [    0.268357] NET: Registered protocol family 2
  [    0.268521] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  [    0.268676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  [    0.268804] TCP: Hash tables configured (established 65536 bind 65536)
  [    0.268821] TCP: reno registered
  [    0.268835] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  [    0.268864] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  [    0.268929] NET: Registered protocol family 1
  [    0.268939] pci 0000:00:02.0: Boot video device
  [    0.269275] PCI: CLS 64 bytes, default 64
  [    0.269328] Trying to unpack rootfs image as initramfs...
  [    0.611379] Freeing initrd memory: 18708K (ffff880035b66000 - ffff880036dab000)
  [    0.611384] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  [    0.611386] software IO TLB [mem 0xb59f8000-0xb99f8000] (64MB) mapped at [ffff8800b59f8000-ffff8800b99f7fff]
  [    0.611562] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
  [    0.611567] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
  [    0.611572] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
  [    0.611579] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
  [    0.611627] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
  [    0.611629] Scanning for low memory corruption every 60 seconds
  [    0.611853] Initialise system trusted keyring
  [    0.611897] audit: initializing netlink socket (disabled)
  [    0.611905] type=2000 audit(1410041999.604:1): initialized
  [    0.642389] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  [    0.643400] zbud: loaded
  [    0.643543] VFS: Disk quotas dquot_6.5.2
  [    0.643579] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  [    0.643954] fuse init (API version 7.22)
  [    0.644018] msgmni has been set to 15732
  [    0.644063] Key type big_key registered
  [    0.644417] Key type asymmetric registered
  [    0.644420] Asymmetric key parser 'x509' registered
  [    0.644456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  [    0.644490] io scheduler noop registered
  [    0.644492] io scheduler deadline registered (default)
  [    0.644516] io scheduler cfq registered
  [    0.644696] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
  [    0.644830] pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X
  [    0.644954] pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X
  [    0.645073] pcieport 0000:00:1c.4: irq 59 for MSI/MSI-X
  [    0.645146] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  [    0.645150] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  [    0.645164] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  [    0.645166] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  [    0.645167] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
  [    0.645171] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  [    0.645184] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
  [    0.645186] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  [    0.645189] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
  [    0.645202] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
  [    0.645204] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
  [    0.645207] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
  [    0.645217] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  [    0.645230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  [    0.645268] efifb: probing for efifb
  [    0.645720] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
  [    0.645722] efifb: mode is 1024x768x32, linelength=4096, pages=1
  [    0.645722] efifb: scrolling: redraw
  [    0.645724] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  [    0.647970] Console: switching to colour frame buffer device 128x48
  [    0.650150] fb0: EFI VGA frame buffer device
  [    0.650166] intel_idle: MWAIT substates: 0x11142120
  [    0.650167] intel_idle: v0.4 model 0x45
  [    0.650168] intel_idle: lapic_timer_reliable_states 0xffffffff
  [    0.650296] ipmi message handler version 39.2
  [    0.660278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  [    0.660324] ACPI: AC Adapter [AC0] (off-line)
  [    0.660423] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
  [    0.661053] ACPI: Lid Switch [LID]
  [    0.661085] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
  [    0.661090] ACPI: Sleep Button [SLPB]
  [    0.661116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  [    0.661119] ACPI: Power Button [PWRF]
  [    0.663353] thermal LNXTHERM:00: registered as thermal_zone0
  [    0.663355] ACPI: Thermal Zone [THRM] (29 C)
  [    0.663382] GHES: HEST is not enabled!
  [    0.663459] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  [    0.665226] Linux agpgart interface v0.103
  [    0.666452] brd: module loaded
  [    0.667101] loop: module loaded
  [    0.667396] libphy: Fixed MDIO Bus: probed
  [    0.667469] tun: Universal TUN/TAP device driver, 1.6
  [    0.667470] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
  [    0.667532] PPP generic driver version 2.4.2
  [    0.667588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  [    0.667592] ehci-pci: EHCI PCI platform driver
  [    0.667698] ehci-pci 0000:00:1d.0: EHCI Host Controller
  [    0.667703] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
  [    0.667716] ehci-pci 0000:00:1d.0: debug port 2
  [    0.671613] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  [    0.671635] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
  [    0.680324] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  [    0.680363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  [    0.680365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    0.680367] usb usb1: Product: EHCI Host Controller
  [    0.680368] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
  [    0.680370] usb usb1: SerialNumber: 0000:00:1d.0
  [    0.681145] hub 1-0:1.0: USB hub found
  [    0.681152] hub 1-0:1.0: 2 ports detected
  [    0.681534] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  [    0.681540] ACPI: Battery Slot [BAT0] (battery present)
  [    0.681615] ehci-platform: EHCI generic platform driver
  [    0.681622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  [    0.681623] ohci-pci: OHCI PCI platform driver
  [    0.681631] ohci-platform: OHCI generic platform driver
  [    0.681637] uhci_hcd: USB Universal Host Controller Interface driver
  [    0.681747] xhci_hcd 0000:00:14.0: xHCI Host Controller
  [    0.681752] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  [    0.681828] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  [    0.681844] xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
  [    0.681897] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  [    0.681898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    0.681900] usb usb2: Product: xHCI Host Controller
  [    0.681902] usb usb2: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
  [    0.681903] usb usb2: SerialNumber: 0000:00:14.0
  [    0.682037] hub 2-0:1.0: USB hub found
  [    0.682047] hub 2-0:1.0: 9 ports detected
  [    0.684665] xhci_hcd 0000:00:14.0: xHCI Host Controller
  [    0.684670] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  [    0.684700] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  [    0.684702] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    0.684703] usb usb3: Product: xHCI Host Controller
  [    0.684705] usb usb3: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
  [    0.684706] usb usb3: SerialNumber: 0000:00:14.0
  [    0.684840] hub 3-0:1.0: USB hub found
  [    0.684848] hub 3-0:1.0: 4 ports detected
  [    0.692403] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  [    0.694807] i8042: Detected active multiplexing controller, rev 1.1
  [    0.696716] serio: i8042 KBD port at 0x60,0x64 irq 1
  [    0.696721] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  [    0.696742] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  [    0.696756] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  [    0.696768] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  [    0.697037] mousedev: PS/2 mouse device common for all mice
  [    0.697330] rtc_cmos 00:05: RTC can wake from S4
  [    0.697466] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  [    0.697495] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  [    0.697556] device-mapper: uevent: version 1.0.3
  [    0.697615] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
  [    0.697620] ledtrig-cpu: registered to indicate activity on CPUs
  [    0.697622] EFI Variables Facility v0.08 2004-May-17
  [    0.699907] TCP: cubic registered
  [    0.699986] NET: Registered protocol family 10
  [    0.700142] NET: Registered protocol family 17
  [    0.700160] Key type dns_resolver registered
  [    0.700460] Loading compiled-in X.509 certificates
  [    0.701376] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
  [    0.701385] registered taskstats version 1
  [    0.703429] Key type trusted registered
  [    0.705112] Key type encrypted registered
  [    0.706725] AppArmor: AppArmor sha1 policy hashing enabled
  [    0.706728] IMA: No TPM chip found, activating TPM-bypass!
  [    0.707180] regulator-dummy: disabling
  [    0.707235]   Magic number: 14:75:350
  [    0.707331] rtc_cmos 00:05: setting system clock to 2014-09-06 22:19:59 UTC (1410041999)
  [    0.708023] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  [    0.708024] EDD information not available.
  [    0.708061] PM: Hibernation image not present or could not be loaded.
  [    0.708761] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
  [    0.708763] Write protecting the kernel read-only data: 12288k
  [    0.710370] Freeing unused kernel memory: 808K (ffff880002736000 - ffff880002800000)
  [    0.711578] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
  [    0.722330] systemd-udevd[115]: starting version 204
  [    0.736038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  [    0.743435] rtsx_pci 0000:02:00.0: irq 61 for MSI/MSI-X
  [    0.743448] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 61
  [    0.745042] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  [    0.745052] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
  [    0.745235] ahci 0000:00:1f.2: version 3.0
  [    0.745315] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
  [    0.745332] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  [    0.752730] r8169 0000:02:00.1: irq 63 for MSI/MSI-X
  [    0.752926] r8169 0000:02:00.1 eth0: RTL8411 at 0xffffc90000c8c000, 78:24:af:23:b7:80, XID 1c800800 IRQ 63
  [    0.752929] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  [    0.760330] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
  [    0.760334] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo only pio slum part deso sadm sds apst 
  [    0.760628] scsi0 : ahci
  [    0.760685] scsi1 : ahci
  [    0.760726] scsi2 : ahci
  [    0.760767] scsi3 : ahci
  [    0.760790] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 62
  [    0.760792] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 62
  [    0.760793] ata3: DUMMY
  [    0.760794] ata4: DUMMY
  [    0.921079] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input11
  [    0.992540] usb 1-1: new high-speed USB device number 2 using ehci-pci
  [    1.080569] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  [    1.086827] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
  [    1.086832] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  [    1.093148] ata1.00: configured for UDMA/133
  [    1.093355] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
  [    1.093519] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  [    1.093523] sd 0:0:0:0: [sda] 4096-byte physical blocks
  [    1.093543] sd 0:0:0:0: Attached scsi generic sg0 type 0
  [    1.093556] sd 0:0:0:0: [sda] Write Protect is off
  [    1.093558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  [    1.093568] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [    1.125009] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
  [    1.125013] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  [    1.125276] hub 1-1:1.0: USB hub found
  [    1.125333] hub 1-1:1.0: 8 ports detected
  [    1.149052]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
  [    1.149506] sd 0:0:0:0: [sda] Attached SCSI disk
  [    1.292731] usb 2-5: new high-speed USB device number 2 using xhci_hcd
  [    1.331488] usb 2-5: New USB device found, idVendor=0bda, idProduct=57b4
  [    1.331492] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  [    1.331494] usb 2-5: Product: USB Camera
  [    1.331496] usb 2-5: Manufacturer: 04081-00051400E5GN23
  [    1.331498] usb 2-5: SerialNumber: 200901010001
  [    1.412773] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [    1.415988] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8FBS, 1.00, max UDMA/100
  [    1.418480] ata2.00: configured for UDMA/100
  [    1.423658] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8FBS   1.00 PQ: 0 ANSI: 5
  [    1.429108] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  [    1.429111] cdrom: Uniform CD-ROM driver Revision: 3.20
  [    1.429251] sr 1:0:0:0: Attached scsi CD-ROM sr0
  [    1.429329] sr 1:0:0:0: Attached scsi generic sg1 type 5
  [    1.444783] usb 2-6: new full-speed USB device number 3 using xhci_hcd
  [    1.462727] usb 2-6: New USB device found, idVendor=04ca, idProduct=2006
  [    1.462730] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  [    1.462732] usb 2-6: Product: BCM43142A0
  [    1.462734] usb 2-6: Manufacturer: Broadcom Corp
  [    1.462735] usb 2-6: SerialNumber: B8EE6593D989
  [    1.487527] mmc0: new SDHC card at address d555
  [    1.489441] mmcblk0: mmc0:d555 SD08G 7.60 GiB 
  [    1.490304]  mmcblk0: p1
  [    1.532836] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
  [    1.608834] tsc: Refined TSC clocksource calibration: 2593.995 MHz
  [    1.629137] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c077
  [    1.629140] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  [    1.629142] usb 1-1.3: Product: USB Optical Mouse
  [    1.629144] usb 1-1.3: Manufacturer: Logitech
  [    1.631803] hidraw: raw HID events driver (C) Jiri Kosina
  [    1.634737] usbcore: registered new interface driver usbhid
  [    1.634741] usbhid: USB HID core driver
  [    1.636075] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input12
  [    1.636171] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
  [    2.482144] random: nonblocking pool is initialized
  [    2.490183] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  [    2.609696] Switched to clocksource tsc
  [    3.804056] init: plymouth-upstart-bridge main process (184) terminated with status 1
  [    3.804066] init: plymouth-upstart-bridge main process ended, respawning
  [    3.805917] init: plymouth-upstart-bridge main process (195) terminated with status 1
  [    3.805930] init: plymouth-upstart-bridge main process ended, respawning
  [    3.807673] init: plymouth-upstart-bridge main process (197) terminated with status 1
  [    3.807682] init: plymouth-upstart-bridge main process ended, respawning
  [    3.809444] init: plymouth-upstart-bridge main process (198) terminated with status 1
  [    3.809452] init: plymouth-upstart-bridge main process ended, respawning
  [    3.810754] init: plymouth-upstart-bridge main process (200) terminated with status 1
  [    3.810762] init: plymouth-upstart-bridge main process ended, respawning
  [    3.812332] init: plymouth-upstart-bridge main process (201) terminated with status 1
  [    3.812343] init: plymouth-upstart-bridge main process ended, respawning
  [    3.813607] init: plymouth-upstart-bridge main process (203) terminated with status 1
  [    3.813614] init: plymouth-upstart-bridge main process ended, respawning
  [    3.815042] init: plymouth-upstart-bridge main process (204) terminated with status 1
  [    3.815049] init: plymouth-upstart-bridge main process ended, respawning
  [    3.816362] init: plymouth-upstart-bridge main process (206) terminated with status 1
  [    3.816368] init: plymouth-upstart-bridge main process ended, respawning
  [    3.817652] init: plymouth-upstart-bridge main process (207) terminated with status 1
  [    3.817661] init: plymouth-upstart-bridge main process ended, respawning
  [    3.819066] init: plymouth-upstart-bridge main process (209) terminated with status 1
  [    3.819074] init: plymouth-upstart-bridge respawning too fast, stopped
  [    5.062186] Adding 19530748k swap on /dev/sda6.  Priority:-1 extents:1 across:19530748k FS
  [    5.990487] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [    6.521541] systemd-udevd[315]: starting version 204
  [    7.894941] lp: driver loaded but no devices found
  [    8.049001] ppdev: user-space parallel port driver
  [    9.854642] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
  [   10.435788] wmi: Mapper loaded
  [   10.558331] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
  [   10.558339] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
  [   10.558345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [   10.558350] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
  [   10.558354] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
  [   10.558359] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
  [   10.558363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [   10.558365] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
  [   10.558369] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
  [   10.558373] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
  [   10.558377] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [   10.558379] lpc_ich: Resource conflict(s) found affecting gpio_ich
  [   10.724754] mei_me 0000:00:16.0: irq 64 for MSI/MSI-X
  [   11.022926] cfg80211: Calling CRDA to update world regulatory domain
  [   11.032464] [drm] Initialized drm 1.1.0 20060810
  [   11.263369] lib80211: common routines for IEEE802.11 drivers
  [   11.263379] lib80211_crypt: registered algorithm 'NULL'
  [   11.431588] wl: module license 'MIXED/Proprietary' taints kernel.
  [   11.431592] Disabling lock debugging due to kernel taint
  [   11.432922] wl: module verification failed: signature and/or  required key missing - tainting kernel
  [   11.462792] INFO @wl_cfg80211_attach : Registered CFG80211 phy
  [   11.688500] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:04:00.0 on minor 0
  [   11.688515] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.38  Wed Jan  8 19:32:30 PST 2014
  [   11.712334] [drm] Memory usable by graphics device = 2048M
  [   11.712337] checking generic (d0000000 300000) vs hw (d0000000 10000000)
  [   11.712338] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
  [   11.712361] Console: switching to colour dummy device 80x25
  [   11.763141] i915 0000:00:02.0: irq 65 for MSI/MSI-X
  [   11.763151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  [   11.763152] [drm] Driver supports precise vblank timestamp query.
  [   11.833640] fbcon: inteldrmfb (fb0) is primary device
  [   11.905043] lib80211_crypt: registered algorithm 'TKIP'
  [   11.939267] asus_wmi: ASUS WMI generic driver loaded
  [   12.007365] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
  [   12.219319] asus_wmi: Initialization: 0x1
  [   12.219351] asus_wmi: BIOS WMI version: 7.9
  [   12.219379] asus_wmi: SFUN value: 0x4a0877
  [   12.220140] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
  [   12.228378] asus_wmi: Backlight controlled by ACPI video driver
  [   12.538414] Linux video capture interface: v2.00
  [   12.655696] intel_rapl: domain uncore energy ctr 1975:1975 not working, skip
  [   12.748048] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
  [   12.754051] input: USB Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input14
  [   12.754124] usbcore: registered new interface driver uvcvideo
  [   12.754125] USB Video Class driver (1.1.1)
  [   12.977835] cfg80211: World regulatory domain updated:
  [   12.977836] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [   12.977839] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   12.977840] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   12.977841] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [   12.977843] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   12.977844] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   13.433147] type=1400 audit(1410034812.216:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=420 comm="apparmor_parser"
  [   13.433151] type=1400 audit(1410034812.216:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
  [   13.433154] type=1400 audit(1410034812.216:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
  [   13.433330] type=1400 audit(1410034812.216:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=419 comm="apparmor_parser"
  [   13.433337] type=1400 audit(1410034812.216:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=419 comm="apparmor_parser"
  [   13.433342] type=1400 audit(1410034812.216:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=419 comm="apparmor_parser"
  [   13.433350] type=1400 audit(1410034812.216:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=498 comm="apparmor_parser"
  [   13.433356] type=1400 audit(1410034812.216:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=498 comm="apparmor_parser"
  [   13.433360] type=1400 audit(1410034812.216:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
  [   13.433532] type=1400 audit(1410034812.216:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
  [   13.452164] Console: switching to colour frame buffer device 170x48
  [   13.454805] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  [   13.454806] i915 0000:00:02.0: registered panic notifier
  [   13.455184] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
  [   13.469600] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
  [   13.472226] acpi device:23: registered as cooling_device5
  [   13.472261] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input15
  [   13.473408] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  [   13.476028] acpi device:79: registered as cooling_device6
  [   13.484214] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16
  [   13.484281] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
  [   13.484448] HDA driver get symbol successfully from i915 module
  [   13.484606] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
  [   13.492149] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X
  [   13.543995] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
  [   13.544063] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
  [   13.544115] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
  [   13.545270] SKU: Nid=0x1d sku_cfg=0x40479a2d
  [   13.545272] SKU: port_connectivity=0x1
  [   13.545272] SKU: enable_pcbeep=0x0
  [   13.545273] SKU: check_sum=0x00000007
  [   13.545274] SKU: customization=0x0000009a
  [   13.545274] SKU: external_amp=0x5
  [   13.545275] SKU: platform_type=0x1
  [   13.545276] SKU: swap=0x0
  [   13.545276] SKU: override=0x1
  [   13.545486] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  [   13.545487]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  [   13.545488]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
  [   13.545488]    mono: mono_out=0x0
  [   13.545489]    inputs:
  [   13.545490]      Internal Mic=0x1a
  [   13.545491]      Mic=0x19
  [   13.545492] realtek: No valid SSID, checking pincfg 0x40479a2d for NID 0x1d
  [   13.545493] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0233
  [   13.552208] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
  [   13.552266] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
  [   13.828436] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [   16.301537] init: failsafe main process (677) killed by TERM signal
  [   19.015979] init: avahi-cups-reload main process (775) terminated with status 1
  [   19.103349] Bluetooth: Core ver 2.17
  [   19.103363] NET: Registered protocol family 31
  [   19.103365] Bluetooth: HCI device and connection manager initialized
  [   19.103371] Bluetooth: HCI socket layer initialized
  [   19.103374] Bluetooth: L2CAP socket layer initialized
  [   19.103377] Bluetooth: SCO socket layer initialized
  [   19.129046] audit_printk_skb: 24 callbacks suppressed
  [   19.129049] type=1400 audit(1410034817.908:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=768 comm="apparmor_parser"
  [   19.129055] type=1400 audit(1410034817.908:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=768 comm="apparmor_parser"
  [   19.129413] type=1400 audit(1410034817.908:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=768 comm="apparmor_parser"
  [   19.845205] Bluetooth: RFCOMM TTY layer initialized
  [   19.845215] Bluetooth: RFCOMM socket layer initialized
  [   19.845220] Bluetooth: RFCOMM ver 1.11
  [   20.157249] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  [   20.157253] Bluetooth: BNEP filters: protocol multicast
  [   20.157261] Bluetooth: BNEP socket layer initialized
  [   24.470690] type=1400 audit(1410034823.244:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=925 comm="apparmor_parser"
  [   24.470696] type=1400 audit(1410034823.244:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser"
  [   24.470699] type=1400 audit(1410034823.244:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
  [   24.471568] type=1400 audit(1410034823.248:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser"
  [   24.471573] type=1400 audit(1410034823.248:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
  [   24.471712] type=1400 audit(1410034823.248:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
  [   24.519246] type=1400 audit(1410034823.296:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=929 comm="apparmor_parser"
  [   24.519258] type=1400 audit(1410034823.296:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=885 comm="apparmor_parser"
  [   24.522201] type=1400 audit(1410034823.296:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=930 comm="apparmor_parser"
  [   24.522206] type=1400 audit(1410034823.296:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=930 comm="apparmor_parser"
  [   25.201408] r8169 0000:02:00.1 eth0: link down
  [   25.201449] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [   25.201678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [   28.319507] bbswitch: version 0.7
  [   28.319515] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
  [   28.319523] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PEGP
  [   28.319532] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   28.319608] bbswitch: detected an Optimus _DSM function
  [   28.319617] bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
  [   34.593422] vgaarb: this pci device is not a vga device
  [   34.664276] nvidia 0000:04:00.0: irq 68 for MSI/MSI-X
  [   34.670798] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670840] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670865] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670888] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670910] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670933] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670967] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670990] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   35.066389] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   35.397175] vgaarb: this pci device is not a vga device
  [   71.644481] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  [  527.975488] systemd-hostnamed[2991]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
  [ 1841.644295] usbcore: registered new interface driver btusb
  [ 2200.843126] Bluetooth: hci0 command 0x1003 tx timeout

  
  And the usb-devices result command when enabling ndiswrapper bcbtums driver:

  T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1d6b ProdID=0002 Rev=03.13
  S:  Manufacturer=Linux 3.13.0-35-generic ehci_hcd
  S:  Product=EHCI Host Controller
  S:  SerialNumber=0000:00:1d.0
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 8
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=8087 ProdID=8000 Rev=00.04
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
  D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=046d ProdID=c077 Rev=72.00
  S:  Manufacturer=Logitech
  S:  Product=USB Optical Mouse
  C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid

  T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 9
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=1d6b ProdID=0002 Rev=03.13
  S:  Manufacturer=Linux 3.13.0-35-generic xhci_hcd
  S:  Product=xHCI Host Controller
  S:  SerialNumber=0000:00:14.0
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  T:  Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=0bda ProdID=57b4 Rev=00.12
  S:  Manufacturer=04081-00051400E5GN23
  S:  Product=USB Camera
  S:  SerialNumber=200901010001
  C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
  I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo

  T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
  D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=04ca ProdID=2006 Rev=01.12
  S:  Manufacturer=Broadcom Corp
  S:  Product=BCM43142A0
  S:  SerialNumber=B8EE6593D989
  C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
  I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

  T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 4
  D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
  P:  Vendor=1d6b ProdID=0003 Rev=03.13
  S:  Manufacturer=Linux 3.13.0-35-generic xhci_hcd
  S:  Product=xHCI Host Controller
  S:  SerialNumber=0000:00:14.0
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  If a solution can be found… :-)

  I tried some solutions I’ve found on the web, but nothing seems to
  work, my best hope was here
  https://forums.openmandriva.org/en/discussion/421/driver-for-wireless-
  bcm43142a0-solved but didn’t work for me. Moreover, I feel like this
  device is more a wifi device than a bluetooth device, but my wifi
  device works fine ! Is it possible that a wifi device is used for
  bluetooth ? I know so less about all that…

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1366418/+subscriptions


References