touch-packages team mailing list archive
-
touch-packages team
-
Mailing list archive
-
Message #60300
[Bug 1401141] Re: DHCP server does not work for IPoIB (Infiniband)
** Patch removed: "utopic_isc-dhcp_4.2.4-7ubuntu15.debdiff"
https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1401141/+attachment/4335363/+files/utopic_isc-dhcp_4.2.4-7ubuntu15.debdiff
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to isc-dhcp in Ubuntu.
https://bugs.launchpad.net/bugs/1401141
Title:
DHCP server does not work for IPoIB (Infiniband)
Status in isc-dhcp package in Ubuntu:
In Progress
Bug description:
[Impact]
* DHCP for InfiniBand IPoIB does not work currently.
* After providing missing GPXE patch it had problems (by Mellanox tests).
* IPoIB patches from Fedora project (out-of-upstream-tree) were outdated.
[Test Case]
* To have IPoIB devices (2 if possible)
* Try to acquire IP using either DHCPv4 or DHCPv6
[Regression Potential]
* DHCP for InfiniBand was not working
* Based on already implemented code (Fedora)
* Mellanox has tested it
[Other Info]
Original BUG description:
Release: Ubuntu 14.04.1 LTS
Version: 4.2.4-7ubuntu12
The current DHCP package in Ubuntu can't handle IPoIB clients. For
IB, Mellanox uses IPoIB, which is “Eth emulator” for the control path.
DHCP is not working in this mode without a patch for DHCP server.
ISC-DHCP-SERVER Missing GPXE patch.
After applying GPXE patch only we faced the following problems:
After apply
1.
dhcp ipoib, does not write in the log on which interface the dhcp work
upon when starting the dhcp server using “/etc/init.d/isc-dhcp-server
start” we don’t see the line that tells on which interfaces the dhcpd
is listening on the /var/log/syslog when running it with “dhcpd –d”
command – we do see it.
2.
dhcp ipoib ipv6, it did not provide ip6 when we start 2 ib interfaces
in a parallel using the following setup:
HOST_A:
acting as a dhcp server, listening on one of its
ipoib (ib0) interfaces.
HOST_B:
running dhcp clients on two ipoib interfaces (ib1, ib2) ib1
and ib2 are two ports onf the same HCA both interfaces are
configured in /etc/interfaces such as:
auto ib1
iface ib1 inet6 dhcp
both interfaces are configured in /etc/dhcp/dhclient.conf with their dhcp-client-identifier Ib0@HOST_A, Ib1@HOST_B and Ib2@HOST_B are connected to an infiniband switch.
We are running on the client (HOST_B) the following:
$ ifup ib1
-> ib1 get configured as expected
but then when we run on the other interface:
$ ifup ib2
-> ib2 get configured, but ib1 is losing its configuration
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/isc-dhcp/+bug/1401141/+subscriptions
References