touch-packages team mailing list archive
-
touch-packages team
-
Mailing list archive
-
Message #74956
[Bug 1426589] Re: tc class statistics rates are all zero after upgrade to Trusty
Visual Echo, could you please test the latest upstream kernel available
from the very top line at the top of the page (the release names are
irrelevant for testing, and please do not test the daily folder)
following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow
additional upstream developers to examine the issue.
If the test did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-X.Y-rcZ
Where XY and Z are numbers corresponding to the kernel version.
If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-X.Y-rcZ
Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results.
Thank you for your understanding.
** Tags added: needs-bisect regression-release
** Changed in: linux (Ubuntu)
Status: Triaged => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iproute2 in Ubuntu.
https://bugs.launchpad.net/bugs/1426589
Title:
tc class statistics rates are all zero after upgrade to Trusty
Status in iproute2 package in Ubuntu:
Confirmed
Status in linux package in Ubuntu:
Incomplete
Bug description:
After upgrading an Ubuntu server from Lucid -> Precise -> Trusty the command:
tc -s class show dev eth0
no longer shows rates for my classification bands. This worked in Lucid, but not sure if something changed, or if I need to set some system configuration to make it work again. My current non-working version is:
$ dpkg -s iproute2
Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@xxxxxxxxxxxxxxxx>
Architecture: amd64
Multi-Arch: foreign
Version: 3.12.0-2
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3
Recommends: libatm1 (>= 2.4.1-17~), libxtables10
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
/etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
/etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
/etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
/etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
/etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934
/etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c
/etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
Description: networking and traffic control tools
The iproute2 suite is a collection of utilities for networking and
traffic control.
.
These tools communicate with the Linux kernel via the (rt)netlink
interface, providing advanced features not available through the
legacy net-tools commands 'ifconfig' and 'route'.
Original-Maintainer: Debian iproute2 Maintainers <ah-iproute@xxxxxxxxxx>
Homepage: http://www.linux-foundation.org/en/Net:Iproute2
Here is the current output of the command, note that 'rate 0bit 0pps'
is common to all classes, in Lucid this would produce non-zero values
for active traffic:
$ tc -s class show dev eth0
class htb 2:1 root rate 4000Kbit ceil 10000Kbit burst 1600b cburst 1600b
Sent 140162776 bytes 377793 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 23022 borrowed: 0 giants: 0
tokens: 46812 ctokens: 18725
class htb 2:2 parent 2:1 leaf 3: prio 0 rate 1000Kbit ceil 4000Kbit burst 1600b cburst 1600b
Sent 2021584 bytes 6949 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 6505 borrowed: 189 giants: 0
tokens: 187250 ctokens: 46812
class htb 2:3 parent 2:1 leaf 4: prio 1 rate 2000Kbit ceil 4000Kbit burst 1600b cburst 1600b
Sent 16695548 bytes 216855 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 216846 borrowed: 9 giants: 0
tokens: 94375 ctokens: 47187
class htb 2:4 parent 2:1 leaf 5: prio 2 rate 1000Kbit ceil 4000Kbit burst 1600b cburst 1600b
Sent 2963040 bytes 46619 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 46619 borrowed: 0 giants: 0
tokens: 193250 ctokens: 48312
class htb 2:5 parent 2:1 leaf 6: prio 3 rate 1000Kbit ceil 4000Kbit burst 1600b cburst 1600b
Sent 99996 bytes 745 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 745 borrowed: 0 giants: 0
tokens: 183000 ctokens: 45750
class htb 2:6 parent 2:1 leaf 7: prio 4 rate 1000Kbit ceil 4000Kbit burst 1600b cburst 1600b
Sent 80608262 bytes 79347 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 50544 borrowed: 13902 giants: 0
tokens: 190750 ctokens: 47687
class htb 2:7 parent 2:1 leaf 8: prio 5 rate 1000Kbit ceil 4000Kbit burst 1600b cburst 1600b
Sent 37606539 bytes 26129 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 5617 borrowed: 8922 giants: 0
tokens: -178485 ctokens: 24056
class htb 2:8 parent 2:1 leaf 9: prio 6 rate 512000bit ceil 1000Kbit burst 1600b cburst 1600b
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 0 borrowed: 0 giants: 0
tokens: 390625 ctokens: 200000
class htb 2:9 parent 2:1 leaf a: prio 7 rate 1000Kbit ceil 1000Kbit burst 1600b cburst 1600b
Sent 167807 bytes 1149 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
lended: 1149 borrowed: 0 giants: 0
tokens: 189875 ctokens: 189875
Did something change upstream to make the rates unavailable? Do I need
to set some config to enable collection? Running the command as root
does not make a difference. My kernel is:
Linux srvr1 3.13.0-46-generic #75-Ubuntu SMP Tue Feb 10 15:24:04 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
Thank you!
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/iproute2/+bug/1426589/+subscriptions
References