← Back to team overview

touch-packages team mailing list archive

[Bug 1485378] [NEW] [REGRESSION] bluetooth visibility turns off

 

Public bug reported:

I had Ubuntu 14.04 and I had the Bluetooth Visibility set to On. (in the
submenu under the bluetooth tray icon, where it reads "Visible")

It used to be always on, I didn't have to turn it on every time I wanted
my computer to be visible.

I upgraded to 14.10 and then to 15.04, and then when failing to send a file over bluetooth to my computer, I found out Visible was off.
I turned it on, and it worked.

However, after a few minutes, it had turned off again.

I can't find a setting anywhere to automatically turn off after N seconds. It would make sense to have that. If there is, it should be accessible through Bluetooth settings.
If such a settings doesn't exist and once turned on bluetooth visibility is supposed to remain on, then there's some bug which is causing it to randomly turn off.

ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: bluetooth (not installed)
ProcVersionSignature: Ubuntu 3.19.0-25.26-generic 3.19.8-ckt2
Uname: Linux 3.19.0-25-generic x86_64
ApportVersion: 2.17.2-0ubuntu1.2
Architecture: amd64
CurrentDesktop: Unity
Date: Sun Aug 16 23:17:42 2015
InstallationDate: Installed on 2013-10-11 (674 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
InterestingModules: rfcomm bnep btusb bluetooth
MachineType: Acer Aspire V3-571G
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic.efi.signed root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7
SourcePackage: bluez
UpgradeStatus: Upgraded to vivid on 2015-08-15 (1 days ago)
dmi.bios.date: 10/15/2012
dmi.bios.vendor: Acer
dmi.bios.version: V2.07
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: VA50_HC_CR
dmi.board.vendor: Acer
dmi.board.version: Type2 - Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V2.07
dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07:
dmi.product.name: Aspire V3-571G
dmi.product.version: V2.07
dmi.sys.vendor: Acer
hciconfig:
 hci0:	Type: BR/EDR  Bus: USB
  BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
  UP RUNNING PSCAN ISCAN
  RX bytes:630 acl:0 sco:0 events:40 errors:0
  TX bytes:988 acl:0 sco:0 commands:40 errors:0

** Affects: bluez (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug vivid

** Description changed:

  I had Ubuntu 14.04 and I had the Bluetooth Visibility set to On. (in the
  submenu under the bluetooth tray icon, where it reads "Visible")
  
  It used to be always on, I didn't have to turn it on every time I wanted
  my computer to be visible.
  
  I upgraded to 14.10 and then to 15.04, and then when failing to send a file over bluetooth to my computer, I found out Visible was off.
  I turned it on, and it worked.
  
  However, after a few minutes, it had turned off again.
  
  I can't find a setting anywhere to automatically turn off after N seconds. It would make sense to have that. If there is, it should be accessible through Bluetooth settings.
- If such a settings doesn't exist and once turned on bluetooth is supposed to remain on, then there's some bug which is causing it to randomly turn off.
+ If such a settings doesn't exist and once turned on bluetooth visibility is supposed to remain on, then there's some bug which is causing it to randomly turn off.
  
  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: bluetooth (not installed)
  ProcVersionSignature: Ubuntu 3.19.0-25.26-generic 3.19.8-ckt2
  Uname: Linux 3.19.0-25-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sun Aug 16 23:17:42 2015
  InstallationDate: Installed on 2013-10-11 (674 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  InterestingModules: rfcomm bnep btusb bluetooth
  MachineType: Acer Aspire V3-571G
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic.efi.signed root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: Upgraded to vivid on 2015-08-15 (1 days ago)
  dmi.bios.date: 10/15/2012
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.07
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: VA50_HC_CR
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.07
  dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07:
  dmi.product.name: Aspire V3-571G
  dmi.product.version: V2.07
  dmi.sys.vendor: Acer
  hciconfig:
-  hci0:	Type: BR/EDR  Bus: USB
-  	BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
-  	UP RUNNING PSCAN ISCAN 
-  	RX bytes:630 acl:0 sco:0 events:40 errors:0
-  	TX bytes:988 acl:0 sco:0 commands:40 errors:0
+  hci0:	Type: BR/EDR  Bus: USB
+   BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
+   UP RUNNING PSCAN ISCAN
+   RX bytes:630 acl:0 sco:0 events:40 errors:0
+   TX bytes:988 acl:0 sco:0 commands:40 errors:0

-- 
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1485378

Title:
  [REGRESSION] bluetooth visibility turns off

Status in bluez package in Ubuntu:
  New

Bug description:
  I had Ubuntu 14.04 and I had the Bluetooth Visibility set to On. (in
  the submenu under the bluetooth tray icon, where it reads "Visible")

  It used to be always on, I didn't have to turn it on every time I
  wanted my computer to be visible.

  I upgraded to 14.10 and then to 15.04, and then when failing to send a file over bluetooth to my computer, I found out Visible was off.
  I turned it on, and it worked.

  However, after a few minutes, it had turned off again.

  I can't find a setting anywhere to automatically turn off after N seconds. It would make sense to have that. If there is, it should be accessible through Bluetooth settings.
  If such a settings doesn't exist and once turned on bluetooth visibility is supposed to remain on, then there's some bug which is causing it to randomly turn off.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: bluetooth (not installed)
  ProcVersionSignature: Ubuntu 3.19.0-25.26-generic 3.19.8-ckt2
  Uname: Linux 3.19.0-25-generic x86_64
  ApportVersion: 2.17.2-0ubuntu1.2
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Sun Aug 16 23:17:42 2015
  InstallationDate: Installed on 2013-10-11 (674 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  InterestingModules: rfcomm bnep btusb bluetooth
  MachineType: Acer Aspire V3-571G
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic.efi.signed root=UUID=5830b30e-69e8-4bb4-8a2b-bc2b43c7414a ro quiet splash vt.handoff=7
  SourcePackage: bluez
  UpgradeStatus: Upgraded to vivid on 2015-08-15 (1 days ago)
  dmi.bios.date: 10/15/2012
  dmi.bios.vendor: Acer
  dmi.bios.version: V2.07
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: VA50_HC_CR
  dmi.board.vendor: Acer
  dmi.board.version: Type2 - Board Version
  dmi.chassis.type: 10
  dmi.chassis.vendor: Acer
  dmi.chassis.version: V2.07
  dmi.modalias: dmi:bvnAcer:bvrV2.07:bd10/15/2012:svnAcer:pnAspireV3-571G:pvrV2.07:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.07:
  dmi.product.name: Aspire V3-571G
  dmi.product.version: V2.07
  dmi.sys.vendor: Acer
  hciconfig:
   hci0:	Type: BR/EDR  Bus: USB
    BD Address: A4:17:31:0D:4A:70  ACL MTU: 1022:8  SCO MTU: 183:5
    UP RUNNING PSCAN ISCAN
    RX bytes:630 acl:0 sco:0 events:40 errors:0
    TX bytes:988 acl:0 sco:0 commands:40 errors:0

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1485378/+subscriptions


Follow ups