← Back to team overview

ubuntu-gnome-qa team mailing list archive

Re: [Ubuntugnome-qa] [Testing] Network issue on HP Elitebook 2530p

 

With pleasure:

test@test:~$ sudo lshw -C network
[sudo] password for test: 
  *-network               
       description: Ethernet interface
       product: 82567LM Gigabit Network Connection
       vendor: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: eth0
       version: 03
       serial: 00:23:5a:a8:bd:3f
       capacity: 1Gbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:43 memory:d4800000-d481ffff memory:d4827000-d4827fff ioport:40e0(size=32)
  *-network
       description: Wireless interface
       product: BCM4312 802.11b/g LP-PHY
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth1
       version: 01
       serial: 00:21:00:fa:55:4f
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=wl0 driverversion=6.30.223.30 (r390414) latency=0 multicast=yes wireless=IEEE 802.11abg
       resources: irq:17 memory:d4600000-d4603fff
test@test:~$ 


www.personaLinux.com
הפצת מערכת הפעלה חינמית בעברית מלאה
עיצוב מערכות הפעלה בהתאמה אישית
  


2013/10/13 Ali Linx (amjjawad) <amjjawad@xxxxxxxxx>

On Wed, Oct 9, 2013 at 6:28 PM, udi pollak <udipollak@xxxxxxxxx> wrote:
Just installed yesterday's iso on my HP Elitebook 2530p. While checking in live I have noticed, that the built in wireless card is not recognized at all. I connected the LAN cable and ran the installation process, hoping to be able to install the wireless card's driver later. But now, after the system is installed, I can't even use the cable. The computer recognizes both ethernet cards - the wired and the wireless, it even shows the list of available wifi around me, but can't connect... I tried to go to the Network settings, but the window appears on the monitor for a second and disappears...


Hi,

Please post the output of:

sudo lshw -C network

Thanks!
--
Remember: "All of us are smarter than any one of us."
Best Regards,
amjjawad
Areas of Involvement
My Projects

Follow ups

References