← Back to team overview

ubuntu-phone team mailing list archive

Re: Reply: Some tips to solve issues while installingTouchEmulator from scratch on an AMD64-system (Trusty)... and some problems

 

There's no surfaceflinger because it's running Mir :)  The first boot takes
quite awhile before graphics show up (it took me a couple minutes at least)


On Fri, Nov 22, 2013 at 10:39 AM, leon lee <llrraa@xxxxxx> wrote:

> My emulator still has no graphics. And no surfaceflinger in the "ps -ef".
> Below is my log. Hope someone could help me.
>
> emulator$ ./run-emulator.sh
> emulator: autoconfig: -ramdisk out/target/product/generic/ramdisk.img
> emulator: autoconfig: -datadir out/target/product/generic
> emulator: Found target ABI=armeabi-v7a, architecture=arm
> emulator: Found target API level: 17
> emulator: using core hw config path:
> out/target/product/generic/hardware-qemu.ini
> emulator: keyset loaded from: /home/leon/.android/default.keyset
> emulator: trying to load skin file
> 'development/tools/emulator/skins/WVGA800/layout'
> emulator: skin network speed: 'full'
> emulator: skin network delay: 'none'
> emulator: Using initial system image: out/target/product/generic/system.img
> emulator: WARNING: system partition size adjusted to match image file (300
> MB > 200 MB)
>
> emulator: autoconfig: -initdata out/target/product/generic/userdata.img
> emulator: WARNING: data partition size adjusted to match image file (300
> MB > 200 MB)
>
> emulator: Physical RAM size: 512MB
>
> emulator: Found target ABI=armeabi-v7a
> emulator: Auto-config: -qemu -cpu cortex-a8
> Content of hardware configuration file:
>   hw.cpu.arch = arm
>   hw.cpu.model = cortex-a8
>   hw.ramSize = 512
>   hw.screen = touch
>   hw.mainKeys = yes
>   hw.trackBall = yes
>   hw.keyboard = no
>   hw.keyboard.lid = no
>   hw.keyboard.charmap = qwerty2
>   hw.dPad = yes
>   hw.gsmModem = yes
>   hw.gps = yes
>   hw.battery = yes
>   hw.accelerometer = yes
>   hw.audioInput = yes
>   hw.audioOutput = yes
>   hw.sdCard = yes
>   hw.sdCard.path = out/target/product/generic/sdcard.img
>   disk.cachePartition = yes
>   disk.cachePartition.path = out/target/product/generic/cache.img
>   disk.cachePartition.size = 66m
>   hw.lcd.width = 480
>   hw.lcd.height = 800
>   hw.lcd.depth = 16
>   hw.lcd.density = 160
>   hw.lcd.backlight = yes
>   hw.gpu.enabled = yes
>   hw.camera.back = emulated
>   hw.camera.front = none
>   vm.heapSize = 48
>   hw.sensors.proximity = yes
>   hw.sensors.magnetic_field = yes
>   hw.sensors.orientation = yes
>   hw.sensors.temperature = yes
>   hw.useext4 = yes
>   kernel.path = out/target/product/generic/ubuntu/kernel/vmlinuz
>   kernel.parameters =  androidboot.console=ttyS2
>   disk.ramdisk.path = out/target/product/generic/ramdisk.img
>   disk.systemPartition.initPath = out/target/product/generic/system.img
>   disk.systemPartition.size = 300m
>   disk.dataPartition.path =
> out/target/product/generic/out/target/product/generic/userdata.img
>   disk.dataPartition.size = 300m
>   avd.name = <build>
> .
> QEMU options list:
> emulator: argv[00] = "out/host/linux-x86/bin//emulator-arm"
> emulator: argv[01] = "-show-kernel"
> emulator: argv[02] = "-serial"
> emulator: argv[03] = "stdio"
> emulator: argv[04] = "-cpu"
> emulator: argv[05] = "cortex-a9"
> emulator: argv[06] = "-append"
> emulator: argv[07] = "apparmor=0"
> emulator: argv[08] = "-android-hw"
> emulator: argv[09] = "out/target/product/generic/hardware-qemu.ini"
> Concatenated QEMU options:
>  out/host/linux-x86/bin//emulator-arm -show-kernel -serial stdio -cpu
> cortex-a9 -append apparmor=0 -android-hw
> out/target/product/generic/hardware-qemu.ini
> emulator: registered 'boot-properties' qemud service
> emulator: nand_add_dev:
> system,size=0x12c00000,initfile=out/target/product/generic/system.img,pagesize=512,extrasize=0
> emulator: mapping 'system' NAND image to /tmp/android-leon/emulator-OHbu0L
> WARNING: Data partition already in use. Changes will not persist!
> emulator: nand_add_dev: userdata,size=0x12c00000,pagesize=512,extrasize=0
> emulator: mapping 'userdata' NAND image to
> /tmp/android-leon/emulator-PWk0i7
> emulator: registered 'boot-properties' qemud service
> emulator: Adding boot property: 'dalvik.vm.heapsize' = '48m'
> emulator: Adding boot property: 'qemu.sf.lcd_density' = '160'
> emulator: Adding boot property: 'qemu.hw.mainkeys' = '1'
> emulator: Adding boot property: 'qemu.sf.fake_camera' = 'back'
> emulator: nand_add_dev:
> cache,size=0x4200000,file=out/target/product/generic/cache.img,pagesize=512,extrasize=0
> emulator: Initializing hardware OpenGLES emulation support
> emulator: Kernel parameters: qemu.gles=1 qemu=1 console=ttyS0
> android.qemud=ttyS1 androidboot.console=ttyS2 ndns=1 apparmor=0
> emulator: Trace file name is not set
>
> emulator: autoconfig: -scale 0.666276
> emulator: emulator window was out of view and was recentered
>
> emulator: Found ro.adb.qemud build property: 1
> emulator: control console listening on port 5554, ADB on port 5555
> emulator: can't connect to ADB server: Connection refused
> emulator: ping program:
> /media/linux/1/touch/Emulator/flipped/emulator/out/host/linux-x86/bin/ddms
> Uncompressing Linux... done, booting the kernel.
> goldfish_fb_get_pixel_format:167: display surface,pixel format:
>   bits/pixel:  16
>   bytes/pixel: 2
>   depth:       16
>   red:         bits=5 mask=0xf800 shift=11 max=0x1f
>   green:       bits=6 mask=0x7e0 shift=5 max=0x3f
>   blue:        bits=5 mask=0x1f shift=0 max=0x1f
>   alpha:       bits=0 mask=0x0 shift=0 max=0x0
> Booting Linux on physical CPU 0
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 3.4.0-1-goldfish (buildd@kishi03) (gcc version 4.6.4
> (Ubuntu/Linaro 4.6.4-3ubuntu1) ) #9-Ubuntu PREEMPT Tue Nov 19 18:30:23 UTC
> 2013
> CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine: Goldfish
> Memory policy: ECC disabled, Data cache writeback
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
> Kernel command line: qemu.gles=1 qemu=1 console=ttyS0 android.qemud=ttyS1
> androidboot.console=ttyS2 ndns=1 apparmor=0
> PID hash table entries: 2048 (order: 1, 8192 bytes)
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 512MB = 512MB total
> Memory: 509696k/509696k available, 14592k reserved, 0K highmem
> Virtual kernel memory layout:
>     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
>     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
>     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
>     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
>     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
>       .text : 0xc0008000 - 0xc05c3c94   (5872 kB)
>       .init : 0xc05c4000 - 0xc05ef000   ( 172 kB)
>       .data : 0xc05f0000 - 0xc0634cc8   ( 276 kB)
>        .bss : 0xc0634cec - 0xc0782cf0   (1337 kB)
> NR_IRQS:256
> sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every
> 4294967286ms
> Console: colour dummy device 80x30
> Calibrating delay loop... 179.60 BogoMIPS (lpj=898048)
> pid_max: default: 32768 minimum: 301
> Security Framework initialized
> AppArmor: AppArmor disabled by boot time parameter
> Mount-cache hash table entries: 512
> Initializing cgroup subsys debug
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys freezer
> Initializing cgroup subsys blkio
> Initializing cgroup subsys perf_event
> CPU: Testing write buffer coherency: ok
> hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 1 counters
> available
> Setting up static identity map for 0x41d248 - 0x41d2a0
> devtmpfs: initialized
> EVM: security.selinux
> EVM: security.SMACK64
> EVM: security.capability
> dummy:
> NET: Registered protocol family 16
> hw-breakpoint: debug architecture 0x0 unsupported.
> bio: create slab <bio-0> at 0
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> Switching to clocksource goldfish_timer
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP: reno registered
> UDP hash table entries: 256 (order: 0, 4096 bytes)
> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> Trying to unpack rootfs image as initramfs...
> Freeing initrd memory: 2344K
> goldfish_new_pdev goldfish_interrupt_controller at ff000000 irq -1
> goldfish_new_pdev goldfish_device_bus at ff001000 irq 1
> goldfish_new_pdev goldfish_timer at ff003000 irq 3
> goldfish_new_pdev goldfish_rtc at ff010000 irq 10
> goldfish_new_pdev goldfish_tty at ff002000 irq 4
> goldfish_new_pdev goldfish_tty at ff011000 irq 11
> goldfish_new_pdev goldfish_tty at ff012000 irq 12
> goldfish_new_pdev smc91x at ff013000 irq 13
> goldfish_new_pdev goldfish_fb at ff014000 irq 14
> goldfish_new_pdev goldfish_audio at ff004000 irq 15
> goldfish_new_pdev goldfish_mmc at ff005000 irq 16
> goldfish_new_pdev goldfish_memlog at ff006000 irq -1
> goldfish_new_pdev goldfish-battery at ff015000 irq 17
> goldfish_new_pdev goldfish_events at ff016000 irq 18
> goldfish_new_pdev goldfish_nand at ff017000 irq -1
> goldfish_new_pdev qemu_pipe at ff018000 irq 19
> goldfish_new_pdev goldfish-switch at ff01a000 irq 20
> goldfish_new_pdev goldfish-switch at ff01b000 irq 21
> goldfish_pdev_worker registered goldfish_interrupt_controller
> goldfish_pdev_worker registered goldfish_device_bus
> goldfish_pdev_worker registered goldfish_timer
> goldfish_pdev_worker registered goldfish_rtc
> goldfish_pdev_worker registered goldfish_tty
> goldfish_pdev_worker registered goldfish_tty
> goldfish_pdev_worker registered goldfish_tty
> goldfish_pdev_worker registered smc91x
> goldfish_pdev_worker registered goldfish_fb
> goldfish_pdev_worker registered goldfish_audio
> audit: initializing netlink socket (disabled)
> type=2000 audit(1.630:1): initialized
> goldfish_pdev_worker registered goldfish_mmc
> goldfish_pdev_worker registered goldfish_memlog
> goldfish_pdev_worker registered goldfish-battery
> goldfish_pdev_worker registered goldfish_events
> goldfish_pdev_worker registered goldfish_nand
> goldfish_pdev_worker registered qemu_pipe
> goldfish_pdev_worker registered goldfish-switch
> goldfish_pdev_worker registered goldfish-switch
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> fuse init (API version 7.18)
> msgmni has been set to 1000
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler deadline registered (default)
> io scheduler cfq registered
> allocating frame buffer 480 * 800, got ffc00000
> console [ttyS0] enabled
> brd: module loaded
> loop: module loaded
> nbd: registered device at major 43
> goldfish_audio_probe
> goldfish nand dev0: size 12c00000, page 512, extra 0, erase 32768
> goldfish nand dev1: size 12c00000, page 512, extra 0, erase 32768
> goldfish nand dev2: size 4200000, page 512, extra 0, erase 32768
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@xxxxxxxxxxx>
> eth0: SMC91C11xFD (rev 1) at fe013000 IRQ 13 [nowait]
> eth0: Ethernet addr: 52:54:00:12:34:56
> mousedev: PS/2 mouse device common for all mice
> *** events probe ***
> events_probe() addr=0xfe016000 irq=18
> events_probe() keymap=qwerty2
> input: qwerty2 as /devices/virtual/input/input0
> goldfish_rtc goldfish_rtc: rtc core: registered goldfish_rtc as rtc0
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
> dm-devel@xxxxxxxxxx
> ashmem: initialized
> logger: created 256K log 'log_main'
> logger: created 256K log 'log_events'
> logger: created 256K log 'log_radio'
> logger: created 256K log 'log_system'
> Netfilter messages via NETLINK v0.30.
> nf_conntrack version 0.5.0 (8000 buckets, 32000 max)
> ctnetlink v0.93: registering with nfnetlink.
> NF_TPROXY: Transparent proxy support initialized, version 4.1.0
> NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
> xt_time: kernel timezone is -0000
> ip_tables: (C) 2000-2006 Netfilter Core Team
> mmc0: new SDHC card at address e118
> arp_tables: (C) 2002 David S. Miller
> TCP: cubic registered
> NET: Registered protocol family 10
> mmcblk0: mmc0:e118 SU02G 4.00 GiB
>  mmcblk0: unknown partition table
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> 8021q: 802.1Q VLAN Support v1.8
> Registering the dns_resolver key type
> VFP support v0.3: implementor 41 architecture 3 part 40 variant 0 rev 0
> Registering SWP/SWPB emulation handler
> goldfish_rtc goldfish_rtc: setting system clock to 2013-11-22 14:37:52 UTC
> (1385131072)
> Freeing init memory: 172K
> Write protecting the kernel text section c0008000 - c0598000
> Loading, please wait...
> systemd-udevd[83]: starting version 204
> Begin: Loading essential drivers ... done.
> Begin: Running /scripts/init-premount ... done.
> Begin: Mounting root file system ... Begin: Running /scripts/local-top ...
> done.
> Begin: Running /scripts/local-premount ... done.
> initrd: mounting /dev/mmcblk0
> EXT4-fs (mmcblk0): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (mmcblk0): couldn't mount as ext2 due to feature incompatibilities
> EXT4-fs (mmcblk0): recovery complete
> EXT4-fs (mmcblk0): mounted filesystem with ordered data mode. Opts: (null)
> initrd: mounting system.img (image developer mode)
> EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (loop0): couldn't mount as ext2 due to feature incompatibilities
> EXT4-fs (loop0): recovery complete
> EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
> EXT4-fs (loop1): couldn't mount as ext3 due to feature incompatibilities
> EXT4-fs (loop1): couldn't mount as ext2 due to feature incompatibilities
> EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
> initrd: device is generic
>
> Ubuntu Trusty Tahr (development branch) ubuntu-phablet ttyS2
>
> ubuntu-phablet login:
>
> phablet@ubuntu-phablet:/var/log/upstart$ ps -ef
> UID        PID  PPID  C STIME TTY          TIME CMD
> root         1     0 10 13:57 ?        00:00:38 /sbin/init
> root         2     0  0 13:57 ?        00:00:00 [kthreadd]
> root         3     2  0 13:57 ?        00:00:00 [ksoftirqd/0]
> root         4     2  0 13:57 ?        00:00:00 [kworker/0:0]
> root         5     2  0 13:57 ?        00:00:00 [kworker/u:0]
> root         6     2  0 13:57 ?        00:00:00 [watchdog/0]
> root         7     2  0 13:57 ?        00:00:00 [cpuset]
> root         8     2  0 13:57 ?        00:00:00 [khelper]
> root         9     2  0 13:57 ?        00:00:00 [kdevtmpfs]
> root        10     2  0 13:57 ?        00:00:00 [netns]
> root        11     2  0 13:57 ?        00:00:00 [sync_supers]
> root        12     2  0 13:57 ?        00:00:00 [bdi-default]
> root        13     2  0 13:57 ?        00:00:00 [kblockd]
> root        14     2  0 13:57 ?        00:00:00 [md]
> root        15     2  0 13:57 ?        00:00:00 [rpciod]
> root        16     2  0 13:57 ?        00:00:00 [kworker/0:1]
> root        17     2  0 13:57 ?        00:00:00 [khungtaskd]
> root        18     2  0 13:57 ?        00:00:00 [kswapd0]
> root        19     2  0 13:57 ?        00:00:00 [fsnotify_mark]
> root        20     2  0 13:57 ?        00:00:00 [ecryptfs-kthrea]
> root        21     2  0 13:57 ?        00:00:00 [crypto]
> root        32     2  0 13:57 ?        00:00:00 [kthrotld]
> root        33     2  0 13:57 ?        00:00:00 [khvcd]
> root        34     2  0 13:57 ?        00:00:00 [kworker/u:1]
> root        37     2  0 13:57 ?        00:00:00 [mtdblock0]
> root        40     2  0 13:57 ?        00:00:00 [mtdblock1]
> root        43     2  0 13:57 ?        00:00:00 [mtdblock2]
> root        44     2  0 13:57 ?        00:00:00 [binder]
> root        45     2  5 13:57 ?        00:00:20 [mmcqd/0]
> root        58     2  0 13:57 ?        00:00:00 [deferwq]
> root        59     2  0 13:57 ?        00:00:00 [devfreq_wq]
> root       125     2  0 13:57 ?        00:00:00 [jbd2/mmcblk0-8]
> root       126     2  0 13:57 ?        00:00:00 [ext4-dio-unwrit]
> root       129     2  1 13:57 ?        00:00:05 [loop0]
> root       132     2  0 13:57 ?        00:00:00 [jbd2/loop0-8]
> root       133     2  0 13:57 ?        00:00:00 [ext4-dio-unwrit]
> root       137     2  0 13:57 ?        00:00:00 [loop1]
> root       140     2  0 13:57 ?        00:00:00 [jbd2/loop1-8]
> root       141     2  0 13:57 ?        00:00:00 [ext4-dio-unwrit]
> root       197     2  0 13:57 ?        00:00:00 [flush-7:0]
> root       198     2  0 13:57 ?        00:00:00 [flush-179:0]
> root       357     2  0 13:58 ?        00:00:00 [jbd2/mtdblock2-]
> root       358     2  0 13:58 ?        00:00:00 [ext4-dio-unwrit]
> root       377     2  0 13:58 ?        00:00:00 [flush-31:2]
> root       560     1  2 13:58 ?        00:00:05 upstart-local-bridge
> --daemon --
> message+   627     1  1 13:59 ?        00:00:03 dbus-daemon --system --fork
> root       632     1  0 13:59 ?        00:00:00 lxc-start -n android --
> /init
> root       661     1  0 13:59 ?        00:00:00 /lib/systemd/systemd-logind
> syslog     669     1  1 13:59 ?        00:00:02 rsyslogd -c5
> root       732     1  1 14:00 ?        00:00:03 upstart-file-bridge
> --daemon
> root       752   632  0 14:00 ?        00:00:00 /init
> root       758   752  0 14:00 ?        00:00:01 /sbin/ueventd
> root       768     1  0 14:00 ?        00:00:00 /usr/bin/adbd
> root       770   752  0 14:00 ?        00:00:00
> /sbin/upstart-property-watcher
> system     775   752  0 14:00 ?        00:00:00 /system/bin/servicemanager
> root       777   752  0 14:00 ?        00:00:00 /system/bin/debuggerd
> radio      778   752  0 14:00 ?        00:00:00 /system/bin/rild
> 1019       779   752  0 14:00 ?        00:00:01 /system/bin/drmserver
> 1013       780   752  1 14:00 ?        00:00:01 /system/bin/mediaserver
> 1012       781   752  0 14:00 ?        00:00:00 /system/bin/installd
> system     784   752  0 14:00 ?        00:00:00 /system/bin/sensorservice
> root       785   752  0 14:00 ?        00:00:00 /system/bin/qemud
> root       790   752  0 14:00 pts/9    00:00:00 /system/bin/sh
> root       855     1  4 14:02 ?        00:00:03 upstart-udev-bridge
> --daemon
> root       858     1  1 14:02 ?        00:00:01 /lib/systemd/systemd-udevd
> --dae
> root      1060     1  2 14:03 ?        00:00:00 upstart-socket-bridge
> --daemon
> root      1176     1  3 14:03 ?        00:00:00 lightdm
> root      1181     1  2 14:03 ?        00:00:00 /bin/sh -e /proc/self/fd/9
> root      1184     1  2 14:03 ?        00:00:00 cron
> root      1194  1181  2 14:03 ?        00:00:00 sleep 5
> root      1198     1  6 14:03 ?        00:00:00 /usr/sbin/sshd -D
> root      1209     1  0 14:03 ttyS2    00:00:00 /bin/login --
> root      1218     1  0 14:03 ?        00:00:00
> /usr/lib/accountsservice/account
> root      1223     1  0 14:03 ?        00:00:00
> /usr/lib/policykit-1/polkitd --n
> root      1239  1176  0 14:03 ?        00:00:00 lightdm --session-child 9
> 13
> root      1242     2  0 14:03 ?        00:00:00 [kauditd]
> phablet   1256  1239  0 14:03 ?        00:00:00 /bin/sh
> /usr/bin/ubuntu-touch-se
> phablet   1282  1256  0 14:03 ?        00:00:00 /usr/bin/ssh-agent
> /usr/bin/dbus
> phablet   1286     1  0 14:03 ?        00:00:00 //bin/dbus-daemon --fork
> --print
> phablet   1290  1256  0 14:03 ?        00:00:00 init --user
> phablet   1293  1290  0 14:03 ?        00:00:00 /usr/bin/python3
> /usr/bin/click
> phablet   1300  1290  0 14:03 ?        00:00:00 ssh-agent
> phablet   1301  1290  0 14:03 ?        00:00:00 /bin/sh -e /proc/self/fd/9
> phablet   1304  1301  0 14:03 ?        00:00:00 sleep 60
> phablet   1309  1290  0 14:03 ?        00:00:00 dbus-daemon --fork
> --session --a
> phablet   1312  1293  0 14:03 ?        00:00:00 /bin/sh -c
> /usr/lib/arm-linux-gn
> phablet   1313  1312  0 14:03 ?        00:00:00
> /usr/lib/arm-linux-gnueabihf/con
> phablet   1314  1290  0 14:03 ?        00:00:00
> /usr/lib/arm-linux-gnueabihf/url
> phablet   1320  1290  0 14:03 ?        00:00:00 upstart-event-bridge
> phablet   1321  1290  0 14:03 ?        00:00:00
> /usr/lib/arm-linux-gnueabihf/hud
> phablet   1325  1290  0 14:03 ?        00:00:00 upstart-file-bridge
> --daemon --u
> phablet   1326  1290  0 14:03 ?        00:00:00 upstart-dbus-bridge
> --daemon --s
> phablet   1327  1290  0 14:03 ?        00:00:00 upstart-dbus-bridge
> --daemon --s
> phablet   1334  1290  0 14:03 ?        00:00:00 pulseaudio --start
> --log-target=
> rtkit     1336     1  0 14:03 ?        00:00:00 /usr/lib/rtkit/rtkit-daemon
> phablet   1350  1209  0 14:03 ttyS2    00:00:00 -bash
> phablet   1373  1350  0 14:03 ttyS2    00:00:00 ps -ef
>
> ------------------ Original ------------------
> *Sender:* "Dmitrijs Ledkovs"<xnox@xxxxxxxxxx>;
> *Send time:* Friday, Nov 22, 2013 10:32 PM
> *To:* "mirco.mueller"<mirco.mueller@xxxxxxxxxxxxx>;
> *Cc:* "ubuntu-phone"<ubuntu-phone@xxxxxxxxxxxxxxxxxxx>;
> *Subject:* Re: [Ubuntu-phone] Some tips to solve issues while
> installingTouchEmulator from scratch on an AMD64-system (Trusty)... and
> some problems
>
> On 22 November 2013 14:24, Mirco Müller <mirco.mueller@xxxxxxxxxxxxx>
> wrote:
> > Am 22.11.2013 14:46, schrieb Mirco Müller:
> >
> > ...
> >
> >     In the meantime I already recognized errors in the avalanche of
> > shell-output stating that my system was missing bison and flex. So I'm
> > redoing several steps of the howto now with these parsers installed. I
> hope
> > that this will solve the reported issues, otherwise I'll provide the
> > requested log-outputs.
> >
> > I have the emulator running now. So all in all, I was missing:
> >
> > schedtool
> > default-jdk
> > gcc-4.8-multilib
> > g++-4.8-multilib
> > bison
> > flex
> >
>
> Touch/Emulator page expects that one also has installed dependencies
> for normal porting which are listed at
> https://wiki.ubuntu.com/Touch/Porting
>
> Which indirectly includes all of the above (g++multilib, brings both
> multilib gcc toolchain packages packages) and openjdk-6-jdk provides a
> jdk alternative.
>
> Regards,
>
> Dmitrijs.
>
>
> > The wiki-page I did update too with the hint that the six missing
> packages
> > are currently not covered by any package-dependency.
> >
> > Best regards...
> >
> > Mirco
>
> --
> Mailing list: https://launchpad.net/~ubuntu-phone
> Post to     : ubuntu-phone@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~ubuntu-phone
> More help   : https://help.launchpad.net/ListHelp
>
> --
> Mailing list: https://launchpad.net/~ubuntu-phone
> Post to     : ubuntu-phone@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~ubuntu-phone
> More help   : https://help.launchpad.net/ListHelp
>
>

References