ubuntu-phone team mailing list archive

[Mattias <mattias@xxxxxxxxxx>]

Hi Matthias,

I extracted the baresip first in Documents, so the config was still 
there. Copying that in place results in a slightly better performance:

echo@xxxxxxxxx: Some echo of my own voice, but mainly an irritating beep
echo@xxxxxxxxx: a clear audio message: The call failed

Any idea on how to tweak the settings? Just trial and error? Any other 
working echo services, because I think the ekiga one is not working 
anymore...
This is the output I still get:

call: connecting to 'sip:echo@xxxxxxxxx'..
call: SIP Progress: 100 Trying (/)
call: SIP Progress: 100 Trying (/)
audio: Set audio decoder: PCMU 8000Hz 1ch
audio: enable auplay resampler: 8000Hz/1ch --> 48000Hz/1ch
pulse: opening player (48000 Hz, 1 channels, device '')
pulse: playback started
audio: Set audio encoder: PCMU 8000Hz 1ch
audio: enable ausrc resampler: 8000Hz/1ch <-- 48000Hz/1ch
pulse: opening recorder (48000 Hz, 1 channels, device '')
pulse: recording started
audio tx pipeline:       pulse ---> vumeter ---> PCMU
audio rx pipeline:       pulse <--- vumeter <--- PCMU
MaTiZ@xxxxxxxxxxxxx: Call established: sip:echo@xxxxxxxxx
main: long async blocking: 571>100 ms (h=0xb6f52159 arg=0xa4fed8)

Mattias

On 14-06-16 21:39, Matthias Apitz wrote:
> El día Tuesday, June 14, 2016 a las 09:15:42PM +0200, Mattias escribió:
>
> > Hi Matthias,
> >
> > Thanks for the great work! I am trying this on a MX4, but I have some
> > sounds issues. Probably due to different hardware compared to the BQ
> > devices. When I make a call to an echo service, I can hear a ticking
> > sound. I think the error is:
> >
> > main: long async blocking: 1127>100 ms (h=0xb6f9a159 arg=0xded530)
> >
> > The complete output is available here: http://paste.ubuntu.com/17336821/
> >
> > Can you maybe share how you tweaked the configuration? I see you changed
> > some values in ~/.baresip/config at
> > https://github.com/alfredh/baresip/issues/136
> > If I remember correctly you also wrote something about using oss.so?
> > Would be nice if you can help to find the correct values for the MX4 device.
> Hello,
>
> The tar archive I published contains my working ~/.baresip/config. On
> the BQ E4.5 and M10 I'm using the pulse.so driver, the others (alsa.so
> and oss.so) do not work.
>
> 	matthias
>
> > >      $ wget http://www.unixarea.de/bq-baresip.tgz
> > >      $ md5 bq-baresip.tgz
> > >      MD5 (bq-baresip.tgz) = 1cb13e6fc70d2b3136d90ee988cc46a8