← Back to team overview

ubuntu-phone team mailing list archive

Re: init: could not import file 'init.mako_svelte.rc' from '/init.mako.rc'

 

Hello,

Thanks for the information about vivid series. I flashed boot,
recovery,System images and Ubuntu Rootfs tarball to my phone, it works fine.

The reason behind building all by myself is that I would like to make some
changes to optimize power right away from booting.

This information was quite helpful.

Thanks

Ujwal




On 8 August 2016 at 16:07, Lukasz Zemczak <lukasz.zemczak@xxxxxxxxxxxxx>
wrote:

> Hello!
>
> Sadly I cannot help much about the building problems you've been
> encountering as for mako we are using launchpad livefs to build the
> relevant parts for us (using the android packages from the ubuntu
> archives). Just wanted to mention one thing here: yakkety is not a
> really a supported series for Ubuntu Touch. No one is doing any QA on
> yakkety ubuntu-touch so there's a high chance that the current images
> will not work or boot at all. The touch development cycle is a bit
> different than for normal ubuntu and baseline switches happen much
> less frequently. Currently all ubuntu-touch development is ongoing on
> the slightly-outdated vivid series (through a special PPA called
> stable-phone-overlay), with a near-future switch to xenial.
> Just saying: there is chance that the yakkety-preinstalled-* pieces
> you used for flashing are not booting because the current system is
> broken and building them from scratch will not change the situation.
>
> For any experimenting we, of course, recommend using our stable
> channels. We have daily images built on system-image.ubuntu.com that
> can be easily used on mako by flashing through the ubuntu-device-flash
> tool. Please check out ubuntu-touch/stable/ubuntu for the stable
> images.
>
> That being said, if you want to try building all the bits yourself
> from scratch, everything is possible to do and I'm sure someone with
> more experience could help out. Although besides the learning and
> fun-factor I don't see too much reason to do that as mako is still our
> supported platform. We're doing even nightly-built images for it in
> the rc-proposed channel.
>
> Cheers!
>
>
> On 9 August 2016 at 00:49, ujwal satish m <ujwalsatishm89@xxxxxxxxx>
> wrote:
> > I think for building
> > 1. boot.img
> > 2. recovery.img
> > 3. system.img (Android LXC container)
> >
> > one has to follow the Ubuntu touch building web page.
> >
> >
> > On 8 August 2016 at 09:26, Joseph Liau <joseph@xxxxxxx> wrote:
> >>
> >>
> >>
> >> On 2016-08-08 12:12 AM, Richard Somlói wrote:
> >> > Hey,
> >> >
> >> > Why do you want to port Ubuntu Touch to Nexus4? It is an official
> >> > supported device with official images.
> >> I am actually curious in trying to obtain the code and made changes for
> >> contribution or testing my own image.
> >>
> >> Are there any official instructions out there for getting the code and
> >> submitting changes?
> >>
> >> > 2016. augusztus 8., hétfő 4:53:34 CEST, ujwal satish m
> >> > <ujwalsatishm89@xxxxxxxxx> írta:
> >> >> Hello,
> >> >>
> >> >> I have been trying to compile and build Ubuntu Touch for Nexus4. I
> >> >> followed
> >> >> the steps mentioned in the porting guide. When I push the system.img
> >> >> [Android] using rootstock installer, the screen goes blank. So far I
> >> >> have
> >> >> followed these instructions:
> >> >>
> >> >> 1.sudo add-apt-repository ppa:phablet-team/tools
> >> >>
> >> >> sudo apt-get update
> >> >> sudo apt-get install phablet-tools
> >> >>
> >> >> 2. sudo apt-get install git gnupg flex bison gperf build-essential
> zip
> >> >> bzr curl libc6-dev libncurses5-dev:i386 x11proto-core-dev
> >> >> libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386
> >> >> libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown
> >> >> libxml2-utils xsltproc zlib1g-dev:i386 schedtool g++-4.8-multilib
> >> >>
> >> >> 3.mkdir phablet phablet-dev-bootstrap phablet
> >> >>
> >> >> 4.export cache
> >> >> 5. lunch--> mako_userdebug
> >> >> 6. make -j4
> >> >> 7.flash all the relevant images(boot.img,recovery.img and system.img)
> >> >>
> >> >> I pulled the kernel msg:
> >> >> it says: 6.114329] Adding 32764k swap on /root/userdata/SWAP.img.
> >> >> Priority:-1 extents:1 across:32764k SS
> >> >> [   11.074286] init: could not import file 'init.mako_svelte.rc' from
> >> >> '/init.mako.rc'
> >> >> [   11.377811] init: cannot open '/initlogo.rle'
> >> >> [   13.918083] [rmnet0] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.918815] [rmnet1] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.919487] [rmnet2] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.920067] [rmnet3] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.920891] [rmnet4] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.921471] [rmnet5] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.922173] [rmnet6] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.922997] [rmnet7] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.923729] [rev_rmnet0] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.924523] [rev_rmnet1] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.925316] [rev_rmnet2] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.926293] [rev_rmnet3] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.927178] [rev_rmnet4] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.928063] [rev_rmnet5] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.928857] [rev_rmnet6] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.929620] [rev_rmnet7] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.930321] [rev_rmnet8] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >> [   13.931115] [rmnet_smux0] error: rmnet_ioct called for unsupported
> >> >> cmd[35585]
> >> >>
> >> >> Can somebody please guide me where I'm going wrong. Because im stuck
> >> >> in this from past 2 weeks.
> >> >>
> >> >> Regards
> >> >>
> >> >> Ujwal
> >> >>
> >> >
> >>
> >>
> >> --
> >> Mailing list: https://launchpad.net/~ubuntu-phone
> >> Post to     : ubuntu-phone@xxxxxxxxxxxxxxxxxxx
> >> Unsubscribe : https://launchpad.net/~ubuntu-phone
> >> More help   : https://help.launchpad.net/ListHelp
> >
> >
> >
> > --
> > Mailing list: https://launchpad.net/~ubuntu-phone
> > Post to     : ubuntu-phone@xxxxxxxxxxxxxxxxxxx
> > Unsubscribe : https://launchpad.net/~ubuntu-phone
> > More help   : https://help.launchpad.net/ListHelp
> >
>
>
>
> --
> Łukasz 'sil2100' Zemczak
>  Foundations Team
>  lukasz.zemczak@xxxxxxxxxxxxx
>  www.canonical.com
>

Follow ups

References