ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #109888
[Bug 656241] Re: Mixxx with ATI graphics card (using FGLRX) crashes Ubuntu
I previously had this problem. Two things seemed to fix it.
1) Purged the fglrx drivers and reinstalled the proprietary ATI drivers
2) Mixxx only starts if I disable compiz as recommended in post #65 (Thanks phil!!)
Now, I'm sure this isn't a long term solution for Mixxx and/or other
programs that Mixxx may rely on causing this problem. However, this
combination of fixes seems to work fine. Previously I could run Mixxx
without waveform displays on, although now they are on and it starts
fine (provided I first disable compiz after each restart).
I tried to automate turning off compiz by changing the Mixxx command to
"metacity --replace && pasuspender mixxx", which I thought should run
"metacity --replace" and then run Mixxx. It didn't exactly work. Perhaps
it is different than using alt+f2, which runs it in tty2 (if I
understand correctly). Should I have to specify that the first command
run in tty2 somehow? Anyways, Mixxx works on my system provided the
above two conditions are met.
System specs/other data:
Ubuntu 10.10
Acer Aspire 4551G
ATI Mobility Radeon HD 5650
Catalyst version 10.12
lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
02:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
06:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
Mixxx log (I believe this is a successful run log, after the above
changes were made. I would have to re-crash it to get the bad log, which
I am willing to do if it will be helpful!):
Debug: [Main]: Mixxx 1.8.2 "" is starting...
Debug: [Main]: Qt version is: 4.7.0
Debug: [Main]: Configuration file is at the current version 1.8.2
Debug: [Main]: Setting "[Channel1]" "play" as toggle
Debug: [Main]: Setting "[Channel1]" "wheel_touch_switch" as toggle
Debug: [Main]: CachingReader using 4980736 bytes.
Debug: [Main]: Setting "[Channel2]" "play" as toggle
Debug: [Main]: Setting "[Channel2]" "wheel_touch_switch" as toggle
Debug: [Main]: CachingReader using 4980736 bytes.
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Mixer Profile]" , "LoEQFrequency" )
Debug: [Main]: Setting "[Channel1]" "filterLowKill" as toggle
Debug: [Main]: Setting "[Channel1]" "filterMidKill" as toggle
Debug: [Main]: Setting "[Channel1]" "filterHighKill" as toggle
Debug: [Main]: Setting "[Channel1]" "pfl" as toggle
Debug: [Main]: Setting "[Channel2]" "filterLowKill" as toggle
Debug: [Main]: Setting "[Channel2]" "filterMidKill" as toggle
Debug: [Main]: Setting "[Channel2]" "filterHighKill" as toggle
Debug: [Main]: Setting "[Channel2]" "pfl" as toggle
Debug: [Main]: Setting "[Channel1]" "flanger" as toggle
Debug: [Main]: Setting "[Channel2]" "flanger" as toggle
Debug: [Main]: SampleRate 48000
Debug: [Main]: Latency 5
Debug: [Main]: ("QSQLITE", "QMYSQL3", "QMYSQL")
Debug: [Main]: src/library/trackcollection.cpp DB status: true
Debug: [Main]: QSqlError(-1, "", "")
Debug: [Main]: SchemaManager::upgradeToSchemaVersion already at version 5
Debug: [Main]: TrackDAO::initialize QThread(0x86298b0, name = "Main") "qt_sql_default_connection"
Debug: [Main]: CrateDAO::initialize()
Debug: [Main]: CueDAO::initialize QThread(0x86298b0, name = "Main") "qt_sql_default_connection"
Debug: [Main]: Created MissingTracksModel!
Debug: [Main]: Promo dir: "/usr/share/mixxx//promo/1.8.0/index.html"
Debug: [Main]: ITunesLibrary=[ "/home/joey/.itunes.xml" ]
Warning: [Main]: WPushButton for control "[Channel1],loop_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],loop_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],TrackEndMode" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],TrackEndMode" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_4_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_4_enabled" is null, skipping.
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Making new GL context.
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#00ff00"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Sharing existing GL context.
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#00ff00"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: WARNING: Text widgets not destroyed before rebooting GUI.
Debug: [Main]: WARNING: BPM widget pointers wre not reset on GUI reboot.
Debug: [Main]: WARNING: Number widgets were not reset before rebooting GUI.
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel1]" , "hotcue_33_position" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel2]" , "hotcue_33_position" )
Debug: [Main]: PlaylistTableModel::setPlaylist 1
Debug: [Main]: WTrackTableView::loadTrackModel() PlaylistTableModel(0x9e8f228)
Debug: [Main]: WTrackTableView::loadTrackModel() PrepareLibraryTableModel(0x9f57b48)
Debug: [Main]: MixxxLibraryFeature::activate()
Debug: [Main]: WTrackTableView::loadTrackModel() LibraryTableModel(0x88209d8)
Debug: [Main]: WLibrary::switchToView "WTrackTableView"
Debug: [Main]: Constructed LibraryScanner!!!
Debug: [Main]: iTunes Album Art path is: ""
Debug: [LibraryScanner 1]: LibraryHashDAO::initialize LibraryScanner(0x9631500, name = "LibraryScanner 1") "LIBRARY_SCANNER"
Debug: [LibraryScanner 1]: CueDAO::initialize LibraryScanner(0x9631500, name = "LibraryScanner 1") "LIBRARY_SCANNER"
Debug: [LibraryScanner 1]: TrackDAO::initialize LibraryScanner(0x9631500, name = "LibraryScanner 1") "LIBRARY_SCANNER"
Debug: [LibraryScanner 1]: Legacy importer took 0 ms
Debug: [Main]: Could not read "/home/joey/.mixxx/midi/MixxxMIDIDevices"
Debug: [Main]: Scanning MIDI devices:
Debug: [Main]: Found output device # 0 Midi Through Port-0
Debug: [Main]: Found output device # 2 TiMidity port 0
Debug: [Main]: Found output device # 3 TiMidity port 1
Debug: [Main]: Found output device # 4 TiMidity port 2
Debug: [Main]: Found output device # 5 TiMidity port 3
Debug: [Main]: Found input device # 1 Midi Through Port-0
Debug: [Main]: Linking to output device # 0 "Midi Through Port-0"
Debug: [Main]: Starting script engine with output device ""
Debug: [MidiScriptEngine 1]: MIDI Device in script engine is: ""
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: MidiDeviceManager: Setting up devices
Debug: [Main]: PortMIDI device "1. Midi Through Port-0" already closed
Debug: [Main]: MidiMapping: Loading MIDI preset from "/home/joey/.mixxx/midi/Midi_Through_Port-0.midi.xml"
Debug: [Main]: MidiOutputMappingTableModel::removeRows()
Debug: [Main]: "Midi Through Port-0" settings found
Debug: [MidiScriptEngine 1]: MidiScriptEngine: Loading & evaluating all MIDI script code
Debug: [MidiScriptEngine 1]: MidiScriptEngine: Loading "/usr/share/mixxx/midi/midi-mappings-scripts.js"
Debug: [Main]: MidiMapping: Input parsed!
Debug: [Main]: MidiMapping: Output parsed!
Debug: [Main]: selectedAPI is: "ALSA"
Debug: [Main]: getSliderLatencyMsec in: 8
Debug: [Main]: getSliderLatencyMsec out: 5
Debug: [Main]: Promo dir: "/usr/share/mixxx//promo/1.8.0/index.html"
Debug: [Main]: loadSettings: 1 0 "SlowFade"
Debug: [Main]: slotApply crossfader: 1 "SlowFade"
Debug: [Main]: BpmSchemes::readXML "/home/joey/.mixxx/mixxxbpmscheme.xml"
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: SoundManager::setupDevices()
Debug: [Main]: Building timecode lookup tables...
Debug: [Main]: Starting vinyl control xwax thread
Debug: [Main]: Building timecode lookup tables...
Debug: [Main]: Starting vinyl control xwax thread
Debug: [Main]: SoundDevicePortAudio::open() "0, HDA ATI SB: ALC272X Analog (hw:0,0)"
Debug: [Main]: m_dSampleRate 48000
Debug: [Main]: iLatencyMSec: 5
Debug: [Main]: output channels: 2 | input channels: 0
Debug: [Main]: iFramesPerBuffer 256
Debug: [Main]: iLatencyMSec: 5
Debug: [Main]: Opening stream with id 0
Debug: [Main]: Opened PortAudio stream successfully... starting
Debug: [Main]: Dynamically loaded PortAudio library!
Debug: [Main]: PortAudio: Started stream successfully
Debug: [Main]: iNumDevicesOpenedForOutput: 1
Debug: [Main]: iNumDevicesOpenedForInput: 0
Debug: [Main]: Qt v4.6.0 or higher detected. Using rebootMixxxView() workaround.
(See bug https://bugs.launchpad.net/mixxx/+bug/521509)
Debug: [Main]: Now in Rebootmixxview...
Debug: [LibraryScanner 1]: Recursively scanning library.
Warning: [Main]: WPushButton for control "[Channel1],loop_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],loop_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],TrackEndMode" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],TrackEndMode" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel1],hotcue_4_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control "[Channel2],hotcue_4_enabled" is null, skipping.
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Sharing existing GL context.
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#00ff00"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#0000ff"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Sharing existing GL context.
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#00ff00"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: Didn't get mark Color, using parent's MarkerColor: "#ff0000"
Debug: [Main]: Didn't get mark TextColor, using parent's BgColor: "#ffffff"
Debug: [Main]: WARNING: Text widgets not destroyed before rebooting GUI.
Debug: [Main]: WARNING: BPM widget pointers wre not reset on GUI reboot.
Debug: [Main]: WARNING: Number widgets were not reset before rebooting GUI.
Debug: [Main]: rebootgui DONE
Warning: [Main]: Object::disconnect: No such signal MixxxApp::trackDropped(QString) in src/mixxx.cpp:1270
Warning: [Main]: Object::disconnect: No such signal MixxxApp::trackDropped(QString) in src/mixxx.cpp:1275
Debug: [Main]: Displaying mixxx
Debug: [Main]: Running Mixxx
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Warning: [Main]: QGLShader::link: "Vertex shader(s) linked, fragment shader(s) linked.
"
Debug: [Main]: Cancelling library scan...
Debug: [LibraryScanner 1]: Recursive scan interrupted.
Debug: [LibraryScanner 1]: Writing tracks to database by TrackDAO::addTracks() took 0 ms
Debug: [LibraryScanner 1]: Scan cancelled
Debug: [LibraryScanner 1]: Scan took: 7153 ms
Debug: [Main]: Destroying MixxxApp
Debug: [Main]: save config, 0
Debug: [Main]: close soundmanager 0
Debug: [Main]: soundmanager->close() done
Debug: [Main]: delete MidiDeviceManager
Debug: [Main]: Closing MIDI device "1. Midi Through Port-0"
Debug: [Main]: PortMIDI device "1. Midi Through Port-0" already closed
Debug: [Main]: delete soundmanager, 7
Debug: [Main]: delete master, 8
Debug: [Main]: in ~EngineMaster()
Debug: [Main]: delete channel1, 10
Debug: [Main]: delete channel2, 11
Debug: [Main]: delete buffer1, 11
Debug: [Main]: delete buffer2, 12
Debug: [Main]: delete view, 13
Debug: [Main]: ~WLibraryTableView
Debug: [Main]: ~DlgTrackInfo()
Debug: [Main]: ~WLibraryTableView
Debug: [Main]: ~WLibraryTableView
Debug: [Main]: ~DlgTrackInfo()
Debug: [Main]: ~WLibraryTableView
Debug: [Main]: ~DlgTrackInfo()
Debug: [Main]: delete library scanner 417
Debug: [Main]: LibraryScanner destroyed
Debug: [Main]: delete library 419
Debug: [Main]: TrackCollection destroyed
Debug: [Main]: delete config, 759
Debug: [Main]: Mixxx shutdown complete with code 0
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to fglrx-installer in ubuntu.
https://bugs.launchpad.net/bugs/656241
Title:
Mixxx with ATI graphics card (using FGLRX) crashes Ubuntu