ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #119953
[Bug 747205] Re: [arrandale] Black screen on all outputs when external VGA is connected
--- intel_regs_before.txt 2011-04-19 16:35:21.000000000 +0100
+++ intel_regs_after.txt 2011-04-19 16:36:05.000000000 +0100
@@ -11,27 +11,27 @@
DISPLAY_PORT_PLL_BIO: 0x00000000
DISPLAY_PORT_PLL_BIO: 0x00000000
FDI_PLL_FREQ_CTL: 0x00053687
- PIPEACONF: 0xc0000054 (enabled, active, 6bpc)
- HTOTAL_A: 0x063f059f (1440 active, 1600 total)
- HBLANK_A: 0x063f059f (1440 start, 1600 end)
- HSYNC_A: 0x05c705b7 (1464 start, 1480 end)
- VTOTAL_A: 0x039d0383 (900 active, 926 total)
- VBLANK_A: 0x039d0383 (900 start, 926 end)
- VSYNC_A: 0x038c0386 (903 start, 909 end)
+ PIPEACONF: 0xc0000000 (enabled, active, 8bpc)
+ HTOTAL_A: 0x081f077f (1920 active, 2080 total)
+ HBLANK_A: 0x081f077f (1920 start, 2080 end)
+ HSYNC_A: 0x07cf07af (1968 start, 2000 end)
+ VTOTAL_A: 0x04d204af (1200 active, 1235 total)
+ VBLANK_A: 0x04d204af (1200 start, 1235 end)
+ VSYNC_A: 0x04b804b2 (1203 start, 1209 end)
VSYNCSHIFT_A: 0x00000000
- PIPEASRC: 0x059f0383 (1440, 900)
- PIPEA_DATA_M1: 0x7e1458c0 (TU 64, val 0x1458c0 1333440)
- PIPEA_DATA_N1: 0x0020f580 (val 0x20f580 2160000)
+ PIPEASRC: 0x077f04af (1920, 1200)
+ PIPEA_DATA_M1: 0x7e386580 (TU 64, val 0x386580 3696000)
+ PIPEA_DATA_N1: 0x0041eb00 (val 0x41eb00 4320000)
PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
- PIPEA_LINK_M1: 0x00012160 (val 0x12160 74080)
+ PIPEA_LINK_M1: 0x00025990 (val 0x25990 154000)
PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
DSPACNTR: 0xd8004400 (enabled)
DSPABASE: 0x00000000
- DSPASTRIDE: 0x00001800 (96)
- DSPASURF: 0x00539000
+ DSPASTRIDE: 0x00001e00 (120)
+ DSPASURF: 0x0c024000
DSPATILEOFF: 0x00000000 (0, 0)
PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
HTOTAL_B: 0x031f027f (640 active, 800 total)
@@ -100,11 +100,11 @@
TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
- TRANSACONF: 0xc0000040 (enable, active)
+ TRANSACONF: 0xc0000000 (enable, active)
TRANSBCONF: 0x00000000 (disable, inactive)
- FDI_TXA_CTL: 0xb0044000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
+ FDI_TXA_CTL: 0xb00c4000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X2, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
FDI_TXB_CTL: 0x00044000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
- FDI_RXA_CTL: 0xb0022050 (enable, train pattern not train, port width X1, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk)
+ FDI_RXA_CTL: 0xb0082050 (enable, train pattern not train, port width X2, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk)
FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
@@ -118,7 +118,7 @@
FDI_RXA_IMR: 0x000000ff
FDI_RXB_IIR: 0x00000000
FDI_RXB_IMR: 0x000000ff
- PCH_ADPA: 0x00f40018 (disabled, transcoder A, +hsync, +vsync)
+ PCH_ADPA: 0x83f40008 (enabled, transcoder A, +hsync, -vsync)
HDMIB: 0x00000018
HDMIC: 0x0000001c
HDMID: 0x00000018
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/747205
Title:
[arrandale] Black screen on all outputs when external VGA is connected
References