ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #122094
[Bug 667635] Re: LCD monitor works only at higher resolution (intel)
** Description changed:
Binary package hint: xorg
I have a Dell Latitude E4310 with the latest ubuntu release (10.10)
output of uname -a:
2.6.35-23-generic #36-Ubuntu SMP Tue Oct 26 17:13:06 UTC 2010 x86_64 GNU/Linux
My LCD display appears only on 1366x768 resolution, no possibility of
changing it, and this causes problems when I attach an external monitor
(by the way, it detects the external monitor perfecctly) because I
cannot do cloning. I have been using linux for many years but my
knowledge is a bit rusty. I would like to add some more modelines but is
not clear to me how to do it since there is no xorg.conf file and I want
to avoid making a mess.
I know that there are similar bugs reported and answered:
https://wiki.ubuntu.com/X/Troubleshooting/Resolution#Problem:
Resolution with Intel graphics was correct in Intrepid or Jaunty (with
no xorg.conf configuration) but is limited in Karmic
but it is not clear if they give the answer to my question: the computer
is brand new and I have not tried any other distribution on it.
Any help is appreciated:
Output of parse-edid /sys/class/drm/card0/card0-DisplayPort-1/edid
parse-edid: parse-edid version 2.0.0
parse-edid: EDID checksum passed.
# EDID version 1 revision 4
Section "Monitor"
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
Identifier "SEC:4154"
VendorName "SEC"
ModelName "SEC:4154"
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
# DPMS capabilities: Active off:no Suspend:no Standby:no
Mode "1366x768" # vfreq 59.998Hz, hfreq 47.398kHz
DotClock 72.140000
HTimings 1366 1414 1446 1522
VTimings 768 770 775 790
Flags "-HSync" "+VSync"
EndMode
Mode "1366x768" # vfreq 39.996Hz, hfreq 31.597kHz
DotClock 48.090000
HTimings 1366 1414 1446 1522
VTimings 768 770 775 790
Flags "-HSync" "+VSync"
EndMode
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
EndSection
formaggia@minnie:~$
formaggia@minnie:~$
formaggia@minnie:~$
formaggia@minnie:~$ cat /etc/re
reader.conf.d/ resolvconf/ resolv.conf
formaggia@minnie:~$ cat /etc/re
reader.conf.d/ resolvconf/ resolv.conf
formaggia@minnie:~$ cat /etc/u
ucf.conf updatedb.conf update-notifier/
udev/ update-manager/ usb_modeswitch.conf
ufw/ update-motd.d/ usb_modeswitch.d/
formaggia@minnie:~$ cat /etc/u
ucf.conf updatedb.conf update-notifier/
udev/ update-manager/ usb_modeswitch.conf
ufw/ update-motd.d/ usb_modeswitch.d/
formaggia@minnie:~$ uname -a
Linux minnie 2.6.35-23-generic #36-Ubuntu SMP Tue Oct 26 17:13:06 UTC 2010 x86_64 GNU/Linux
formaggia@minnie:~$ sudo parse-edid /sys/class/drm/card0/card0-DisplayPort-1/edid
parse-edid: parse-edid version 2.0.0
parse-edid: EDID checksum passed.
# EDID version 1 revision 4
Section "Monitor"
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
Identifier "SEC:4154"
VendorName "SEC"
ModelName "SEC:4154"
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
# DPMS capabilities: Active off:no Suspend:no Standby:no
Mode "1366x768" # vfreq 59.998Hz, hfreq 47.398kHz
DotClock 72.140000
HTimings 1366 1414 1446 1522
VTimings 768 770 775 790
Flags "-HSync" "+VSync"
EndMode
Mode "1366x768" # vfreq 39.996Hz, hfreq 31.597kHz
DotClock 48.090000
HTimings 1366 1414 1446 1522
VTimings 768 770 775 790
Flags "-HSync" "+VSync"
EndMode
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
EndSection
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: xorg 1:7.5+6ubuntu3
ProcVersionSignature: Ubuntu 2.6.35-23.36-generic 2.6.35.7
Uname: Linux 2.6.35-23-generic x86_64
Architecture: amd64
DRM.card0.DisplayPort.1:
status: connected
enabled: enabled
dpms: On
modes: 1366x768 1366x768
edid-base64: AP///////wBMo0FUAAAAAP8UAQSVHRB4CiDll1lSiScdUFQAAAABAQEBAQEBAQEBAQEBAQEBLhxWnFAAFjAwICUAJaUQAAAayRJWnFAAFjAwICUAJaUQAAAaAAAA/gBYRjkzMIExMzNBVAogAAAAAAAAQQEWAAAAAAkBCiAgAJw=
DRM.card0.DisplayPort.2:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.DisplayPort.3:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.HDMI_Type_A.1:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.HDMI_Type_A.2:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.VGA.1:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
Date: Thu Oct 28 09:08:48 2010
DkmsStatus:
blcr, 0.8.2: added
vboxhost, 3.2.10, 2.6.35-23-generic, x86_64: installed
vboxhost, 3.2.10, 2.6.36-020636-generic, x86_64: installed
vboxhost, 3.2.10, 2.6.35-22-generic, x86_64: installed (WARNING! Diff between built and installed module!) (WARNING! Diff between built and installed module!) (WARNING! Diff between built and installed module!)
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
Lsusb:
Bus 002 Device 003: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Dell Inc. Latitude E4310
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=cbe3602b-5bda-469e-a3e7-4277f190210d ro quiet splash
ProcEnviron:
PATH=(custom, user)
LANG=it_IT.utf8
SHELL=/bin/bash
SourcePackage: xorg
Symptom: display
dmi.bios.date: 08/10/2010
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A04
dmi.board.name: 04HKYP
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 9
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA04:bd08/10/2010:svnDellInc.:pnLatitudeE4310:pvr0001:rvnDellInc.:rn04HKYP:rvrA00:cvnDellInc.:ct9:cvr:
dmi.product.name: Latitude E4310
dmi.product.version: 0001
dmi.sys.vendor: Dell Inc.
glxinfo: Error: [Errno 2] Nessun file o directory
system:
distro: Ubuntu
codename: maverick
architecture: x86_64
kernel: 2.6.35-23-generic
+
+ [lspci]
+ 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
+ Subsystem: Dell Device [1028:0410]
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/667635
Title:
LCD monitor works only at higher resolution (intel)
References
