ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #122108
[Bug 680821] Re: Display port monitor works only if plugged in at startup
** Description changed:
Binary package hint: xserver-xorg-video-intel
On a HP 8440p, I use the external monitor through the Display Port (and adapter to DVI). The monitor will not work unless I switch it on and immediately plug it in just after I power on the laptop (basically, I have to switch it on and connect it when I see the bios welcome screen).
Once the monitor works, I can reboot and it will still work. If I switch off, I have to redo the same procedure.
Output through VGA works instead normally.
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: xserver-xorg-video-intel 2:2.12.0-1ubuntu5.1
ProcVersionSignature: Ubuntu 2.6.35-22.35-generic 2.6.35.4
Uname: Linux 2.6.35-22-generic i686
Architecture: i386
DRM.card0.DisplayPort.1:
status: connected
enabled: enabled
dpms: On
modes: 1366x768 1366x768
edid-base64: AP///////wAGrzwUAAAAAAATAQSVHxF4AkUlnFtVnCcZUFQAAAABAQEBAQEBAQEBAQEBAQEBEhtWRlAAIzAmFjYANa0QAAAYDBJWRlAAIzAmFjYANa0QAAAYAAAAAAAAAAAAAAAAAAAAAAAAAAAAAgAMRegLPGQSEh1uICAgAK4=
DRM.card0.DisplayPort.2:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.DisplayPort.3:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.DisplayPort.4:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.HDMI_Type_A.1:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.HDMI_Type_A.2:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
DRM.card0.HDMI_Type_A.3:
status: connected
enabled: enabled
dpms: On
modes: 1280x1024 1280x1024 1280x1024 1280x960 1280x960 1152x864 1152x864 1024x768 1024x768 1024x768 832x624 800x600 800x600 800x600 800x600 800x600 640x480 640x480 640x480 640x480 720x400
edid-base64: AP///////wAFIyUZtQEAACIRAQOAJR546v1WpVNKnSQUT1S/74BFRnFAcU+BQIFPgYCBioGPMCoAmFEAKkAwcBMAdy0RAAAeAAAA/QAxSx5QDgAKICAgICAgAAAA/ABFLTE5MSBEVkkKICAgAAAA/wA0MzcKICAgICAgICAgAHs=
DRM.card0.VGA.1:
status: disconnected
enabled: disabled
dpms: Off
modes:
edid-base64:
Date: Wed Nov 24 09:37:15 2010
EcryptfsInUse: Yes
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
MachineType: Hewlett-Packard HP EliteBook 8440p
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=dd347085-6cbd-4afe-8e88-91d48b6f5722 ro quiet splash
ProcEnviron:
LANGUAGE=it_IT:en_GB:en
PATH=(custom, user)
LANG=en_US.utf8
SHELL=/bin/zsh
SourcePackage: xserver-xorg-video-intel
dmi.bios.date: 02/23/2010
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: 68CCU Ver. F.05
dmi.board.name: 172A
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 30.29
dmi.chassis.asset.tag: CZC012390V
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnHewlett-Packard:bvr68CCUVer.F.05:bd02/23/2010:svnHewlett-Packard:pnHPEliteBook8440p:pvr:rvnHewlett-Packard:rn172A:rvrKBCVersion30.29:cvnHewlett-Packard:ct10:cvr:
dmi.product.name: HP EliteBook 8440p
dmi.sys.vendor: Hewlett-Packard
system:
distro: Ubuntu
codename: maverick
architecture: i686
kernel: 2.6.35-22-generic
+
+ [lspci]
+ 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 12) (prog-if 00 [VGA controller])
+ Subsystem: Hewlett-Packard Company Device [103c:172a]
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in Ubuntu.
https://bugs.launchpad.net/bugs/680821
Title:
Display port monitor works only if plugged in at startup
References