ubuntu-x-swat team mailing list archive

Thread
Date
Re: [Bug 404577] Re: Xorg does not load in karmic using Zotac ion board A series

To: ubuntu-x-swat@xxxxxxxxxxxxxxxxxxx
From: mzc <mzcariaga@xxxxxxx>
Date: Mon, 27 Jul 2009 23:11:36 -0000
Reply-to: Bug 404577 <404577@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
The issue is 9.10 does not load, this is 9.04 using 185.18 driver (my
current system) from NVIDIA:

mark@mark-desktop:~$ lspci -vvnn
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge
[10de:0a82] (rev b1)
	Subsystem: nVidia Corporation Device [10de:cb79]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
[10de:0a88] (rev b1)
	Subsystem: nVidia Corporation Device [10de:cb79]
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge
[10de:0aad] (rev b2)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 4f00 [size=256]

00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
[10de:0aa4] (rev b1)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev
b1)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 4900 [size=64]
	Region 4: I/O ports at 4d00 [size=64]
	Region 5: I/O ports at 4e00 [size=64]
	Capabilities: <access denied>

00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller
[10de:0a89] (rev b1)
	Subsystem: nVidia Corporation Device [10de:cb79]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor
[10de:0aa3] (rev b1)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 9
	Region 0: Memory at fae80000 (32-bit, non-prefetchable) [size=512K]

00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1
Controller [10de:0aa5] (rev b1) (prog-if 10)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fae7f000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0
Controller [10de:0aa6] (rev b1) (prog-if 20)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at fae7ec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1
Controller [10de:0aa7] (rev b1) (prog-if 10)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fae7d000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0
Controller [10de:0aa9] (rev b1) (prog-if 20)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 20
	Region 0: Memory at fae7e800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition
Audio [10de:0ac0] (rev b1)
	Subsystem: PC Partner Limited Device [174b:437b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge
[10de:0aab] (rev b1) (prog-if 01)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP79 Ethernet
[10de:0ab0] (rev b1)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at fae7c000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at d080 [size=8]
	Region 2: Memory at fae7e400 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fae7e000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:0b.0 IDE interface [0101]: nVidia Corporation MCP79 SATA Controller
[10de:0ab4] (rev b1) (prog-if 85 [Master SecO PriO])
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 2298
	Region 0: I/O ports at d000 [size=8]
	Region 1: I/O ports at cc00 [size=4]
	Region 2: I/O ports at c880 [size=8]
	Region 3: I/O ports at c800 [size=4]
	Region 4: I/O ports at c480 [size=16]
	Region 5: Memory at fae76000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0ac4] (rev b1)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0aa0] (rev b1)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: faf00000-fbffffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000f9ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0ac6] (rev b1)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: feb00000-febfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:16.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0ac7] (rev b1)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:17.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0ac7] (rev b1)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:18.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge
[10de:0ac7] (rev b1)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

03:00.0 VGA compatible controller [0300]: nVidia Corporation Device
[10de:087d] (rev b1)
	Subsystem: ZOTAC International (MCO) Ltd. Device [19da:a108]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at f8000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at ec00 [size=128]
	[virtual] Expansion ROM at fafe0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidia, nvidiafb

04:00.0 Network controller [0280]: Atheros Communications Inc. AR928X
Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
	Subsystem: Device [1a3b:1067]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
	Kernel modules: ath9k


On Mon, 2009-07-27 at 17:39 +0000, Bryce Harrington wrote:
> Hi mzcariaga-shaw,
> 
> 
> Thanks for including an image to demonstrate the issue.  Could you also please attach the output of `lspci -vvnn`, and attach your /var/log/Xorg.0.log or Xorg.0.log.old file from after reproducing this issue. If you've made any customizations to your /etc/X11/xorg.conf please attach that as well.
> 
> [This is an automated message.  Apologies if it has reached you
> inappropriately; please just reply to this message indicating so.]
> 
> 
> ** Tags added: needs-xorglog
> 
> ** Changed in: xorg-server (Ubuntu)
>        Status: New => Incomplete
>

-- 
Xorg does not load in karmic using Zotac ion board A series
https://bugs.launchpad.net/bugs/404577
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-server in ubuntu.
References

[Bug 404577] Re: Xorg does not load in karmic using Zotac ion board A series
From: Bryce Harrington, 2009-07-27