← Back to team overview

ubuntu-x-swat team mailing list archive

[Bug 827080] [NEW] System Freeze Every Start-Up

 

You have been subscribed to a public bug:

Every Start-Up of Ubuntu Maverick Meerkat (10.10) on my Toshiba
Satellite Laptop, the whole system freezes a few minutes after Logging
in. This is about the time I have to open Firefox (but the problem
occurs even if I do not open any software). SysRq+Alt+REISUB has no
effect so I have to do a hard restart.  This usually fixes the problem
(when I log-in again) but sometimes I have to restart in this manner two
or three times. I think it maybe a GUI issue.

Any suggestions?

Here is my Xorg.0.log file

[  3802.073] 
X.Org X Server 1.9.0
Release Date: 2010-08-20
[  3802.073] X Protocol Version 11, Revision 0
[  3802.073] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[  3802.073] Current Operating System: Linux rafa-Satellite-A200 2.6.35-30-generic #56-Ubuntu SMP Mon Jul 11 20:00:22 UTC 2011 i686
[  3802.073] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-30-generic root=UUID=773bb190-033f-4f1c-9b77-a6d9ac32ee46 ro quiet splash
[  3802.073] Build Date: 16 September 2010  05:39:22PM
[  3802.073] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support) 
[  3802.073] Current version of pixman: 0.18.4
[  3802.073] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  3802.073] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  3802.074] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 16 12:53:23 2011
[  3802.074] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  3802.147] (==) No Layout section.  Using the first Screen section.
[  3802.147] (==) No screen section available. Using defaults.
[  3802.147] (**) |-->Screen "Default Screen Section" (0)
[  3802.147] (**) |   |-->Monitor "<default monitor>"
[  3802.147] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  3802.147] (==) Automatically adding devices
[  3802.148] (==) Automatically enabling devices
[  3802.149] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  3802.149] 	Entry deleted from font path.
[  3802.150] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[  3802.150] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  3802.150] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  3802.150] (II) Loader magic: 0x81f8e00
[  3802.150] (II) Module ABI versions:
[  3802.150] 	X.Org ANSI C Emulation: 0.4
[  3802.150] 	X.Org Video Driver: 8.0
[  3802.150] 	X.Org XInput driver : 11.0
[  3802.150] 	X.Org Server Extension : 4.0
[  3802.152] (--) PCI:*(0:0:2:0) 8086:27a2:1179:ff10 rev 3, Mem @ 0xf0a00000/524288, 0xd0000000/268435456, 0xf0b00000/262144, I/O @ 0x00001800/8
[  3802.152] (--) PCI: (0:0:2:1) 8086:27a6:1179:ff10 rev 3, Mem @ 0xf0a80000/524288
[  3802.153] (II) Open ACPI successful (/var/run/acpid.socket)
[  3802.153] (II) LoadModule: "extmod"
[  3802.154] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  3802.154] (II) Module extmod: vendor="X.Org Foundation"
[  3802.154] 	compiled for 1.9.0, module version = 1.0.0
[  3802.154] 	Module class: X.Org Server Extension
[  3802.154] 	ABI class: X.Org Server Extension, version 4.0
[  3802.154] (II) Loading extension MIT-SCREEN-SAVER
[  3802.154] (II) Loading extension XFree86-VidModeExtension
[  3802.154] (II) Loading extension XFree86-DGA
[  3802.154] (II) Loading extension DPMS
[  3802.154] (II) Loading extension XVideo
[  3802.154] (II) Loading extension XVideo-MotionCompensation
[  3802.154] (II) Loading extension X-Resource
[  3802.154] (II) LoadModule: "dbe"
[  3802.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  3802.219] (II) Module dbe: vendor="X.Org Foundation"
[  3802.220] 	compiled for 1.9.0, module version = 1.0.0
[  3802.220] 	Module class: X.Org Server Extension
[  3802.220] 	ABI class: X.Org Server Extension, version 4.0
[  3802.220] (II) Loading extension DOUBLE-BUFFER
[  3802.220] (II) LoadModule: "glx"
[  3802.221] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  3802.221] (II) Module glx: vendor="X.Org Foundation"
[  3802.221] 	compiled for 1.9.0, module version = 1.0.0
[  3802.221] 	ABI class: X.Org Server Extension, version 4.0
[  3802.221] (==) AIGLX enabled
[  3802.221] (II) Loading extension GLX
[  3802.221] (II) LoadModule: "record"
[  3802.223] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  3802.231] (II) Module record: vendor="X.Org Foundation"
[  3802.231] 	compiled for 1.9.0, module version = 1.13.0
[  3802.231] 	Module class: X.Org Server Extension
[  3802.231] 	ABI class: X.Org Server Extension, version 4.0
[  3802.231] (II) Loading extension RECORD
[  3802.231] (II) LoadModule: "dri"
[  3802.232] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  3802.240] (II) Module dri: vendor="X.Org Foundation"
[  3802.240] 	compiled for 1.9.0, module version = 1.0.0
[  3802.240] 	ABI class: X.Org Server Extension, version 4.0
[  3802.240] (II) Loading extension XFree86-DRI
[  3802.240] (II) LoadModule: "dri2"
[  3802.242] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  3802.242] (II) Module dri2: vendor="X.Org Foundation"
[  3802.242] 	compiled for 1.9.0, module version = 1.2.0
[  3802.242] 	ABI class: X.Org Server Extension, version 4.0
[  3802.242] (II) Loading extension DRI2
[  3802.242] (==) Matched intel as autoconfigured driver 0
[  3802.242] (==) Matched vesa as autoconfigured driver 1
[  3802.242] (==) Matched fbdev as autoconfigured driver 2
[  3802.242] (==) Assigned the driver to the xf86ConfigLayout
[  3802.242] (II) LoadModule: "intel"
[  3802.243] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  3802.253] (II) Module intel: vendor="X.Org Foundation"
[  3802.253] 	compiled for 1.9.0, module version = 2.12.0
[  3802.253] 	Module class: X.Org Video Driver
[  3802.253] 	ABI class: X.Org Video Driver, version 8.0
[  3802.253] (II) LoadModule: "vesa"
[  3802.254] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  3802.258] (II) Module vesa: vendor="X.Org Foundation"
[  3802.258] 	compiled for 1.8.99.905, module version = 2.3.0
[  3802.258] 	Module class: X.Org Video Driver
[  3802.258] 	ABI class: X.Org Video Driver, version 8.0
[  3802.258] (II) LoadModule: "fbdev"
[  3802.259] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  3802.269] (II) Module fbdev: vendor="X.Org Foundation"
[  3802.269] 	compiled for 1.8.99.905, module version = 0.4.2
[  3802.269] 	ABI class: X.Org Video Driver, version 8.0
[  3802.269] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
[  3802.271] (II) VESA: driver for VESA chipsets: vesa
[  3802.271] (II) FBDEV: driver for framebuffer: fbdev
[  3802.271] (--) using VT number 8

[  3802.284] (WW) Falling back to old probe method for vesa
[  3802.284] (WW) Falling back to old probe method for fbdev
[  3802.284] (II) Loading sub module "fbdevhw"
[  3802.284] (II) LoadModule: "fbdevhw"
[  3802.285] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  3802.333] (II) Module fbdevhw: vendor="X.Org Foundation"
[  3802.334] 	compiled for 1.9.0, module version = 0.0.2
[  3802.334] 	ABI class: X.Org Video Driver, version 8.0
[  3802.371] drmOpenDevice: node name is /dev/dri/card0
[  3802.372] drmOpenDevice: open result is 9, (OK)
[  3802.372] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[  3802.372] drmOpenDevice: node name is /dev/dri/card0
[  3802.372] drmOpenDevice: open result is 9, (OK)
[  3802.372] drmOpenByBusid: drmOpenMinor returns 9
[  3802.372] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[  3802.372] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  3802.372] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  3802.372] (==) intel(0): RGB weight 888
[  3802.372] (==) intel(0): Default visual is TrueColor
[  3802.372] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[  3802.372] (--) intel(0): Chipset: "945GM"
[  3802.372] (==) intel(0): video overlay key set to 0x101fe
[  3802.405] (II) intel(0): Output VGA1 has no monitor section
[  3802.405] (II) intel(0): Output LVDS1 has no monitor section
[  3802.405] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[  3802.692] (II) intel(0): Output TV1 has no monitor section
[  3802.724] (II) intel(0): EDID for output VGA1
[  3802.724] (II) intel(0): EDID for output LVDS1
[  3802.724] (II) intel(0): Manufacturer: SHP  Model: 13ce  Serial#: 0
[  3802.724] (II) intel(0): Year: 1990  Week: 0
[  3802.724] (II) intel(0): EDID Version: 1.3
[  3802.724] (II) intel(0): Digital Display Input
[  3802.724] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[  3802.724] (II) intel(0): Gamma: 2.20
[  3802.724] (II) intel(0): DPMS capabilities: StandBy Suspend
[  3802.724] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  3802.724] (II) intel(0): First detailed timing is preferred mode
[  3802.724] (II) intel(0): redX: 0.000 redY: 0.000   greenX: 0.000 greenY: 0.000
[  3802.724] (II) intel(0): blueX: 0.000 blueY: 0.000   whiteX: 0.000 whiteY: 0.000
[  3802.724] (II) intel(0): Manufacturer's mask: 0
[  3802.724] (II) intel(0): Supported detailed timing:
[  3802.724] (II) intel(0): clock: 71.0 MHz   Image Size:  331 x 207 mm
[  3802.725] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[  3802.725] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[  3802.725] (II) intel(0): EDID (in hex):
[  3802.725] (II) intel(0): 	00ffffffffffff004d10ce1300000000
[  3802.725] (II) intel(0): 	0000010380211578ca00000000000000
[  3802.725] (II) intel(0): 	00000000000001010101010101010101
[  3802.725] (II) intel(0): 	010101010101bc1b00a0502017303020
[  3802.725] (II) intel(0): 	36004bcf100000190000001000000000
[  3802.725] (II) intel(0): 	00000000000000000a20000000100000
[  3802.725] (II) intel(0): 	000000000000000000000a2000000010
[  3802.725] (II) intel(0): 	004c513135344b314c423143200a0062
[  3802.726] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[  3802.726] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  3802.726] (II) intel(0): Printing probed modes for output LVDS1
[  3802.726] (II) intel(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3802.727] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  3802.727] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[  3802.727] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[  3802.727] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[  3803.012] (II) intel(0): EDID for output TV1
[  3803.012] (II) intel(0): Output VGA1 disconnected
[  3803.012] (II) intel(0): Output LVDS1 connected
[  3803.012] (II) intel(0): Output TV1 disconnected
[  3803.012] (II) intel(0): Using exact sizes for initial modes
[  3803.012] (II) intel(0): Output LVDS1 using initial mode 1280x800
[  3803.012] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  3803.012] (II) intel(0): Kernel page flipping support detected, but forcibly disabled.
[  3803.012] (==) intel(0): DPI set to (96, 96)
[  3803.012] (II) Loading sub module "fb"
[  3803.012] (II) LoadModule: "fb"
[  3803.013] (II) Loading /usr/lib/xorg/modules/libfb.so
[  3803.038] (II) Module fb: vendor="X.Org Foundation"
[  3803.038] 	compiled for 1.9.0, module version = 1.0.0
[  3803.038] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3803.038] (II) UnloadModule: "vesa"
[  3803.038] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  3803.038] (II) UnloadModule: "fbdev"
[  3803.039] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  3803.039] (II) UnloadModule: "fbdevhw"
[  3803.039] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[  3803.039] (==) Depth 24 pixmap format is 32 bpp
[  3803.039] (II) intel(0): [DRI2] Setup complete
[  3803.039] (II) intel(0): [DRI2]   DRI driver: i915
[  3803.039] (**) intel(0): Tiling enabled
[  3803.039] (**) intel(0): SwapBuffers wait enabled
[  3803.039] (==) intel(0): VideoRam: 262144 KB
[  3803.039] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[  3803.039] (II) UXA(0): Driver registered support for the following operations:
[  3803.039] (II)         solid
[  3803.039] (II)         copy
[  3803.039] (II)         composite (RENDER acceleration)
[  3803.039] (II)         put_image
[  3803.039] (II)         get_image
[  3803.039] (==) intel(0): Backing store disabled
[  3803.040] (==) intel(0): Silken mouse enabled
[  3803.040] (II) intel(0): Initializing HW Cursor
[  3803.100] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  3803.103] (==) intel(0): DPMS enabled
[  3803.103] (==) intel(0): Intel XvMC decoder disabled
[  3803.103] (II) intel(0): Set up textured video
[  3803.103] (II) intel(0): Set up overlay video
[  3803.104] (II) intel(0): direct rendering: DRI2 Enabled
[  3803.104] (--) RandR disabled
[  3803.104] (II) Initializing built-in extension Generic Event Extension
[  3803.104] (II) Initializing built-in extension SHAPE
[  3803.104] (II) Initializing built-in extension MIT-SHM
[  3803.104] (II) Initializing built-in extension XInputExtension
[  3803.104] (II) Initializing built-in extension XTEST
[  3803.104] (II) Initializing built-in extension BIG-REQUESTS
[  3803.104] (II) Initializing built-in extension SYNC
[  3803.104] (II) Initializing built-in extension XKEYBOARD
[  3803.104] (II) Initializing built-in extension XC-MISC
[  3803.104] (II) Initializing built-in extension SECURITY
[  3803.104] (II) Initializing built-in extension XINERAMA
[  3803.104] (II) Initializing built-in extension XFIXES
[  3803.104] (II) Initializing built-in extension RENDER
[  3803.104] (II) Initializing built-in extension RANDR
[  3803.104] (II) Initializing built-in extension COMPOSITE
[  3803.104] (II) Initializing built-in extension DAMAGE
[  3803.104] (II) Initializing built-in extension GESTURE
[  3803.128] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  3803.128] (II) AIGLX: enabled GLX_INTEL_swap_event
[  3803.128] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  3803.128] (II) AIGLX: enabled GLX_SGI_make_current_read
[  3803.128] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  3803.128] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[  3803.128] (II) GLX: Initialized DRI2 GL provider for screen 0
[  3803.129] (II) intel(0): Setting screen physical size to 338 x 211
[  3803.284] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[  3803.323] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  3803.323] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  3803.323] (II) LoadModule: "evdev"
[  3803.323] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  3803.364] (II) Module evdev: vendor="X.Org Foundation"
[  3803.364] 	compiled for 1.9.0, module version = 2.3.2
[  3803.364] 	Module class: X.Org XInput Driver
[  3803.364] 	ABI class: X.Org XInput driver, version 11.0
[  3803.364] (**) Power Button: always reports core events
[  3803.364] (**) Power Button: Device: "/dev/input/event2"
[  3803.364] (II) Power Button: Found keys
[  3803.364] (II) Power Button: Configuring as keyboard
[  3803.365] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  3803.365] (**) Option "xkb_rules" "evdev"
[  3803.365] (**) Option "xkb_model" "pc105"
[  3803.365] (**) Option "xkb_layout" "us"
[  3803.367] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  3803.367] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  3803.367] (**) Video Bus: always reports core events
[  3803.367] (**) Video Bus: Device: "/dev/input/event4"
[  3803.377] (II) Video Bus: Found keys
[  3803.377] (II) Video Bus: Configuring as keyboard
[  3803.377] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  3803.377] (**) Option "xkb_rules" "evdev"
[  3803.377] (**) Option "xkb_model" "pc105"
[  3803.377] (**) Option "xkb_layout" "us"
[  3803.383] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  3803.383] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  3803.383] (**) Power Button: always reports core events
[  3803.383] (**) Power Button: Device: "/dev/input/event1"
[  3803.393] (II) Power Button: Found keys
[  3803.393] (II) Power Button: Configuring as keyboard
[  3803.393] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  3803.393] (**) Option "xkb_rules" "evdev"
[  3803.393] (**) Option "xkb_model" "pc105"
[  3803.393] (**) Option "xkb_layout" "us"
[  3803.394] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  3803.394] (II) No input driver/identifier specified (ignoring)
[  3803.407] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[  3803.407] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  3803.407] (**) AT Translated Set 2 keyboard: always reports core events
[  3803.407] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[  3803.421] (II) AT Translated Set 2 keyboard: Found keys
[  3803.421] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  3803.421] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  3803.421] (**) Option "xkb_rules" "evdev"
[  3803.421] (**) Option "xkb_model" "pc105"
[  3803.421] (**) Option "xkb_layout" "us"
[  3803.422] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[  3803.422] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  3803.422] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  3803.422] (II) LoadModule: "synaptics"
[  3803.423] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  3803.434] (II) Module synaptics: vendor="X.Org Foundation"
[  3803.434] 	compiled for 1.9.0, module version = 1.2.2
[  3803.434] 	Module class: X.Org XInput Driver
[  3803.434] 	ABI class: X.Org XInput driver, version 11.0
[  3803.434] (II) Synaptics touchpad driver version 1.2.2
[  3803.434] (**) Option "Device" "/dev/input/event5"
[  3803.445] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[  3803.445] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[  3803.445] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  3803.445] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[  3803.445] (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  3803.448] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  3803.448] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  3803.453] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  3803.453] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  3803.456] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  3803.456] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  3803.456] (II) No input driver/identifier specified (ignoring)
[  3804.324] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3804.324] (II) intel(0): Printing DDC gathered Modelines:
[  3804.324] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3804.644] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3804.644] (II) intel(0): Printing DDC gathered Modelines:
[  3804.644] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3804.968] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3804.968] (II) intel(0): Printing DDC gathered Modelines:
[  3804.968] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3805.292] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3805.292] (II) intel(0): Printing DDC gathered Modelines:
[  3805.292] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3812.641] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3812.641] (II) intel(0): Printing DDC gathered Modelines:
[  3812.641] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3812.968] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3812.968] (II) intel(0): Printing DDC gathered Modelines:
[  3812.968] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3813.292] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3813.292] (II) intel(0): Printing DDC gathered Modelines:
[  3813.292] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3813.612] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3813.612] (II) intel(0): Printing DDC gathered Modelines:
[  3813.612] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3814.388] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3814.388] (II) intel(0): Printing DDC gathered Modelines:
[  3814.388] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3815.181] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3815.181] (II) intel(0): Printing DDC gathered Modelines:
[  3815.181] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  3820.257] (II) intel(0): EDID vendor "SHP", prod id 5070
[  3820.257] (II) intel(0): Printing DDC gathered Modelines:
[  3820.257] (II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)

ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: evince 2.32.0-0ubuntu1.1
ProcVersionSignature: Ubuntu 2.6.35-30.56-generic 2.6.35.13
Uname: Linux 2.6.35-30-generic i686
Architecture: i386
Date: Tue Aug 16 13:01:14 2011
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
ProcEnviron:
 LANG=en_NZ.utf8
 SHELL=/bin/bash
SourcePackage: evince

** Affects: xorg (Ubuntu)
     Importance: Undecided
         Status: Incomplete


** Tags: apport-bug i386 maverick
-- 
System Freeze Every Start-Up
https://bugs.launchpad.net/bugs/827080
You received this bug notification because you are a member of Ubuntu-X, which is subscribed to xorg in Ubuntu.