ubuntu-x-swat team mailing list archive

Thread
Date
[Bug 408588] Re: Low screen resolution using Ubuntu 9.10 Alpha 3, Alpha 4, and Alpha 5

To: ubuntu-x-swat@xxxxxxxxxxxxxxxxxxx
From: henning melgaard <nymark1@xxxxxxxxx>
Date: Thu, 10 Sep 2009 20:02:46 -0000
Reply-to: Bug 408588 <408588@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
okay I found out how to....Here is /var/log/Xorg.0.log


> [    0.113786] pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07]
> [    0.113849] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
> [    0.113955] pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f]
> [    0.114016] pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f]
> [    0.114076] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
> [    0.114136] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
> [    0.114205] pci 0000:00:1d.7: re
> [    0.114269] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [    0.114275] pci 0000:00:1d.7: PME# disabled
> [    0.114375] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> [    0.114383] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
> [    0.114388] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
> [    0.114417] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
> [    0.114425] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
> [    0.114433] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
> [    0.114442] pci 0000:00:1f.1: reg 1c io port: [0x00-0
> [    0.114450] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
> [    0.114458] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
> [    0.114494] pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807]
> [    0.114502] pci 0000:00:1f.2: reg 14 io port: [0xe400-0xe403]
> [    0.114510] pci 0000:00:1f.2: reg 18 io port: [0xe000-0xe007]
> [    0.114517] pci 0000:00:1f.2: reg 1c io port: [0xdc00-0xdc03]
> [    0.114525] pci 0000:00:1f.2: reg 20 io port: [0xd800-0xd80f]
> [    0.114584] pci 0000:00:1f.3: reg 20 io port: [0xc400-0xc41f]
> [    0.114649] pci 0000:00:1f.5: reg 18 32bit mmio: [0xffa80400-0xffa805ff]
> [    0.114658] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xffa80800-0xffa808ff]
> [    0.114692] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
> [    0.114697] pci 0000:00:1f.5: PME# disabled
> [    0.114754] pci 0000:01:08.0: reg 10 32bit mmio: [0xff900000-0xff900fff]
> [    0.114762] pci 0000:01:08.0: reg 14 io port: [0xbc00-0xbc3f]
> [    0.114805] pci 0000:01:08.0: supports D1 D2
> [    0.114808] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.114813] pci 0000:01:08.0: PME# disabled
> [    0.114849] pci 0000:00:1e.0: transparent bridge
> [    0.114854] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
> [    0.114860] pci 0000:00:1e.0: bridge 32bit mmio: [0xff900000-0xff9fffff]
> [    0.114873] pci_bus 0000:00: on NUMA node 0
> [    0.114886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.115017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> [    0.119679] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> [    0.119884] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
> [    0.120119] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> [    0.120320] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> [    0.120519] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
> [    0.120720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> [    0.120917] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> [    0.121116] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
> [    0.122121] SCSI subsystem initialized
> [    0.122197] libata version 3.00 loaded.
> [    0.122674] usbcore: registered new interface driver usbfs
> [    0.122778] usbcore: registered new interface driver hub
i
> [    0.122901] usbcore: registered new device driver usb
> [    0.123816] ACPI: WMI: Mapper loaded
> [    0.123821] PCI: Using ACPI for IRQ routing
> [    0.124249] Bluetooth: Core ver 2.15
> [    0.124391] NET: Registered protocol family 31
> [    0.124395] Bluetooth: HCI device and connection manager initialized
> [    0.124399] Bluetooth: HCI socket layer initialized
> [    0.124403] NetLabel: Initializing
> [    0.124405] NetLabel:  domain hash size = 128
> [    0.124408] NetLabel:  protocols = UNLABELED CIPSOv4
> [    0.124433] NetLabel:  unlabeled traffic allowed by default
> [    0.124718] hpet clockevent registered
> [    0.124723] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [    0.124730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [    0.124738] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> [    0.130636] pnp: PnP ACPI init
> [    0.130673] ACPI: bus type pnp registered
> [    0.137628] pnp: PnP ACPI: found 13 devices
> [    0.137635] ACPI: ACPI bus type pnp unregistered
> [    0.137641] PnPBIOS: Disabled by ACPI PNP
> [    0.137670] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
> [    0.137681] system 00:0b: ioport range 0x400-0x47f has been reserved
> [    0.137685] system 00:0b: ioport range 0x680-0x6ff has been reserved
> [    0.137689] system 00:0b: ioport range 0x500-0x53f has been reserved
> [    0.137694] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
> [    0.137700] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
> [    0.137704] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved
> [    0.137714] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
> [    0.137718] system 00:0c: iomem range 0xc0000-0xd7fff could not be reserved
> [    0.137722] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
> [    0.137726] system 00:0c: iomem range 0x100000-0x3effffff could not be reserved
> [    0.173333] AppArmor: AppArmor Filesystem Enabled
> [    0.173373] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
> [    0.173378] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
> [    0.173385] pci 0000:00:1e.0:   MEM window: 0xff900000-0xff9fffff
> [    0.173390] pci 0000:00:1e.0:   PREFETCH window: disabled
> [    0.173408] pci 0000:00:1e.0: setting latency timer to 64
> [    0.173417] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
> [    0.173421] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
> [    0.173425] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
> [    0.173428] pci_bus 0000:01: resource 1 mem: [0xff900000-0xff9fffff]
> [    0.173431] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
> [    0.173434] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
> [    0.173496] NET: Registered protocol family 2
> [    0.173635] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [    0.174141] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [    0.175230] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [    0.175810] TCP: Hash tables configured (established 131072 bind 65536)
> [    0.175817] TCP reno registered
> [    0.176055] NET: Registered protocol family 1
> [    0.176159] Trying to unpack rootfs image as initramfs...
> [    0.438011] Freeing initrd memory: 7055k freed
> [    0.447968] cpufreq-nforce2: No nForce2 chipset.
> [    0.448249] Scanning for low memory corruption every 60 seconds
> [    0.448783] audit: initializing netlink socket (disabled)
> [    0.448806] type=2000 audit(1252609437.447:1): initialized
> [    0.459031] highmem bounce pool size: 64 pages
> [    0.459040] HugeTLB registered 4 MB page size, pre-allocated 0 pages
d
> [    0.464261] VFS: Disk quotas dquot_6.5.2
> [    0.464989] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [    0.466955] fuse init (API version 7.12)
> [    0.467365] msgmni has been set to 1732
> [    0.467819] alg: No test for stdrng (krng)
> [    0.467843] io scheduler noop registered
> [    0.467846] io scheduler anticipatory registered
> [    0.467849] io scheduler deadline registered
> [    0.468074] io scheduler cfq registered (default)
> [    0.468099] pci 0000:00:02.0: Boot video device
> [    0.468195] pci
> [    0.468569] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    0.468809] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [    0.469449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [    0.469456] ACPI: Power Button [PWRF]
> [    0.469648] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
> [    0.469658] ACPI: Sleep Button [SLPB]
> [    0.470209] processor LNXCPU:00: registered as cooling_device0
> [    0.470217] ACPI: Processor [CPU0] (supports 8 throttling states)
> [    0.473381] isapnp: Scanning for PnP cards...
> [    0.628003] Switched to high resolution mode on CPU 0
> [    0.827389] isapnp: No Plug & Play device found
> [    0.834695] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    0.834905] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    0.835896] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    0.840240] brd: module loaded
> [    0.842230] loop: module loaded
> [    0.842612] input: Macintosh mouse button emulation as /devices/virtual/input/input2
_
> [    0.843208] ata_piix 0000:00:1f.1: version 2.13
> [    0.843227] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
> [    0.843240]   alloc irq_desc for 18 on node -1
> [    0.843243]   alloc kstat_irqs on node -1
> [    0.843252] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [    0.843309] ata_piix 0000:00:1f.1: setting latency timer to 64
> [    0.843428] scsi0 : ata_piix
> [    0.843752] scsi1 : ata_piix
> [    0.845564] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
> [    0.845569] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
> [    0.845612] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [    0.845620] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
o
> [    0.845682] ata_piix 0000:00:1f.2: setting latency timer to 64
> [    0.845925] scsi2 : ata_piix
> [    0.846375] scsi3 : ata_piix
> [    0.847699] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 18
> [    0.847704] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 18
> [    0.853379] Fixed MDIO Bus: probed
> [    0.853389] PPP generic driver version 2.4.2
 
> [    0.853862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    0.853924]   alloc irq_desc for 23 on node -1
> [    0.853928]   alloc kstat_irqs on node -1
> [    0.853939] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
> [    0.853960] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [    0.853965] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [    0.854138] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> [    0.858052] ehci_hcd 0000:00:1d.7: debug port 1
> [    0.858061] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
> [    0.858086] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80000
> [    0.872013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [    0.872289] usb usb1: configuration #1 chosen from 1 choice
> [    0.872419] hub 1-0:1.0: USB hub found
> [    0.872438] hub 1-0:1.0: 8 ports detected
> [    0.872622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    0.872745] uhci_hcd: USB Universal Host Controller Interface driver
> [    0.872825]   alloc irq_desc for 16 on node -1
> [    0.872828]   alloc kstat_irqs on node -1
> [    0.872839] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[
> [    0.872851] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [    0.872855] uhci_hcd 0000:00:1d.0: UHCI Host Controller
]
> [    0.873025] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [    0.873070] uhci_hcd 0000:00:1d
> [    0.873307] usb usb2: configuration #1 chosen from 1 choice
> [    0.873437] hub 2-0:1.0: USB hub found
> [    0.873456] hub 2-0:1.0: 2 ports detected
> [    0.873533]   alloc irq_desc for 19 on node -1
> [    0.873537]   alloc kstat_irqs on node -1
> [    0.873546] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [    0.873556] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [    0.873561] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [    0.873736] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
2
> [    0.873780] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
> [    0.874014] usb usb3: configuration #1 chosen from 1 choice
> [    0.874137] hub 3-0:1.0: USB hub found
> [    0.874154] hub 3-0:1.0: 2 ports detected
> [    0.874235] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [    0.874247] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [    0.874251] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [    0.874431] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> [    0.874465] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
> [    0.874694] usb usb4: configuration #1 chosen from 1 choice
> [    0.874819] hub 4-0:1.0: USB hub found
> [    0.874837] hub 4-0:1.0: 2 ports detected
> [    0.874916] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [    0.874927] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [    0.874931] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [    0.875092] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> [    0.875125] uhci_
> [    0.875347] usb usb5: configuration #1 chosen from 1 choice
> [    0.875469] hub 5-0:1.0: USB hub found
> [    0.875485] hub 5-0:1.0: 2 ports detected
> [    0.875849] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [    0.875853] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [    0.876549] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    0.877022] mice: PS/2 mouse device common for all mice
> [    0.877501] rtc_cmos 00:02: RTC can wake from S4
> [    0.877686] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [    0.877720] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
> [    0.878160] device-mapper: uevent: version 1.0.3
> [    0.878502] device-mapper: io
> [    0.878610] device-mapper: multipath: version 1.1.0 loaded
> [    0.878616] device-mapper: multipath round-robin: version 1.0.0 loaded
> [    0.879091] EISA: Probing bus 0 at eisa.0
> [    0.879132] EISA: Detected 0 cards.
> [    0.879209] cpuidle: using governor ladder
> [    0.879213] cpuidle: using governor menu
> [    0.880362] TCP cubic registered
> [    0.880925] NET: Registered 
> [    0.881577] lo: Disabled Privacy Extensions
> [    0.882037] NET: Registered protocol family 17
> [    0.882200] Bluetooth: L2CAP ver 2.13
> [    0.882204] Bluetooth: L2CAP socket layer initialized
> [    0.882208] Bluetooth: SCO (Voice Link) ver 0.6
> [    0.882210] Bluetooth: SCO socket layer initialized
> [    0.882257] Bluetooth: RFCOMM TTY layer initialized
> [    0.882262] Bluetooth: RFCOMM socket layer initialized
> [    0.882265] Bluetooth: RFCOMM ver 1.11
> [    0.882302] Using IPI No-Shortcut mode
> [    0.882731] PM: Resume from disk failed.
> [    0.882756] registered taskstats version 1
> [    0.882889]   Magic number: 9:298:91
> [    0.882997] rtc_cmos 00:02: setting system clock to 2009-09-10 19:03:58 UTC (1252609438)
> [    0.883002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [    0.883004] EDD information not available.
> [    0.903929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> [    1.022666] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4480B, 1.12, max UDMA/44
> [    1.023042] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
> [    1.023046] ata1.00: 160086528 sectors, multi 16: LBA 
> [    1.036342] ata2.00: configured for UDMA/44
> [
> [    1.036806] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
> [    1.037356] sd 0:0:0:0: [sda]
> [    1.037434] sd 0:0:0:0: [sda] Write Protect is off
> [    1.037439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    1.037478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
e
bash: [: missing `]'
hn@hn-desktop:~$ [    1.037708]  sda:
l
bash: [: missing `]'
hn@hn-desktop:~$ [    1.038088] sd 0:0:0:0: Attached scsi generic sg0 type 0
bash: [: missing `]'
hn@hn-desktop:~$ [    1.038759] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4480B 1.12 PQ: 0 ANSI: 5
bash: [: missing `]'
hn@hn-desktop:~$ [    1.040988] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
bash: [: missing `]'
hn@hn-desktop:~$ [    1.040995] Uniform CD-ROM driver Revision: 3.20
bash: [: missing `]'
hn@hn-desktop:~$ [    1.041316] sr 1:0:0:0: Attached scsi CD-ROM sr0
bash: [: missing `]'
hn@hn-desktop:~$ [    1.041575] sr 1:0:0:0: Attached scsi generic sg1 type 5
bash: [: missing `]'
hn@hn-desktop:~$ [    1.046718]  sda1 sda2
bash: [: missing `]'
hn@hn-desktop:~$ [    1.066401] sd 0:0:0:0: [sda] Attached SCSI disk
bash: [: missing `]'
hn@hn-desktop:~$ [    1.066427] Freeing unused kernel memory: 536k freed
bash: [: missing `]'
hn@hn-desktop:~$ [    1.067102] Write protecting the kernel text: 4536k
"
bash: [: missing `]'
hn@hn-desktop:~$ [    1.067138] Write protecting the kernel read-only data: 1824k
bash: [: missing `]'
hn@hn-desktop:~$ [    1.212314] Linux agpgart interface v0.103
bash: [: missing `]'
hn@hn-desktop:~$ [    1.216557] agpgart-intel 0000:00:00.0: Intel 865 Chipset
bash: [: missing `]'
hn@hn-desktop:~$ [    1.216734] agpgart-intel 0000:00:00.0: detected 16252K stolen memory
bash: [: missing `]'
hn@hn-desktop:~$ [    1.218789] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
bash: [: missing `]'
hn@hn-desktop:~$ [    1.251429] [drm] Initialized drm 1.1.0 20060810
bash: [: missing `]'
hn@hn-desktop:~$ [    1.270070] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    1.270080] i915 0000:00:02.0: setting latency timer to 64
bash: [: missing `]'
hn@hn-desktop:~$ [    1.367658] [drm] DAC-5: set mode 640x480 0
bash: [: missing `]'
hn@hn-desktop:~$ [    1.787427] usb 2-1: new low speed USB device using uhci_hcd and address 2
bash: [: missing `]'
hn@hn-desktop:~$ [    1.791883] i2c-adapter i2c-0: unable to read EDID block.
bash: [: missing `]'
hn@hn-desktop:~$ [    1.791888] i915 0000:00:02.0: VGA-1: no EDID data
bash: [: missing `]'
hn@hn-desktop:~$ [    1.791892] [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes
bash: [: missing `]'
hn@hn-desktop:~$ [    1.795195] [drm] fb0: inteldrmfb frame buffer device
bash: [: missing `]'
hn@hn-desktop:~$ [    1.795210] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
bash: [: missing `]'
hn@hn-desktop:~$ [    1.882941] render error detected, EIR: 0x00000010
bash: [: missing `]'
hn@hn-desktop:~$ [    1.882947] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
0
bash: [: missing `]'
hn@hn-desktop:~$ [    1.882955] render error detected, EIR: 0x00000010
bash: [: missing `]'
hn@hn-desktop:~$ [    1.889440] [drm] DAC-5: set mode 800x600 8
bash: [: missing `]'
hn@hn-desktop:~$ [    1.891631] Console: switching to colour frame buffer device 100x37
bash: [: missing `]'
hn@hn-desktop:~$ [    1.988180] usb 2-1: configuration #1 chosen from 1 choice
bash: [: missing `]'
hn@hn-desktop:~$ [    2.171140] Floppy drive(s): fd0 is 1.44M
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    2.217526] FDC 0 is a National Semiconductor PC87306
bash: [: missing `]'
hn@hn-desktop:~$ [    2.244205] usbcore: registered new interface driver hiddev
bash: [: missing `]'
hn@hn-desktop:~$ [    2.260766] input: A4Tech Wireless Battery Free Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
bash: [: missing `]'
hn@hn-desktop:~$ [    2.260912] generic-usb 0003:09DA:032B.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech Wireless Battery Free Optical Mouse] on usb-0000:00:1d.0-1/input0
bash: [: missing `]'
hn@hn-desktop:~$ [    2.260944] usbcore: registered new interface driver usbhid
bash: [: missing `]'
hn@hn-desktop:~$ [    2.260948] usbhid: v2.6:USB HID core driver
bash: [: missing `]'
hn@hn-desktop:~$ [    2.358754] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    2.358760] e100: Copyright(c) 1999-2006 Intel Corporation
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    2.358833]   alloc irq_desc for 20 on node -1
bash: [: missing `]'
hn@hn-desktop:~$ [    2.358837]   alloc kstat_irqs on node -1
bash: [: missing `]'
hn@hn-desktop:~$ [    2.358847] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    2.382378] e100 0000:01:08.0: PME# disabled
bash: [: missing `]'
hn@hn-desktop:~$ [    2.443507] e100: eth0: e100_probe: addr 0xff900000, irq 20, MAC addr 00:13:20:41:76:cd
bash: [: missing `]'
hn@hn-desktop:~$ [    3.041678] PM: Starting manual resume from disk
bash: [: missing `]'
hn@hn-desktop:~$ [    3.041684] PM: Resume from partition 8:5
bash: [: missing `]'
hn@hn-desktop:~$ [    3.041687] PM: Checking hibernation image.
bash: [: missing `]'
hn@hn-desktop:~$ [    3.041945] PM: Resume from disk failed.
bash: [: missing `]'
hn@hn-desktop:~$ [    3.064183] EXT4-fs (sda1): barriers enabled
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    3.081405] kjournald2 starting: pid 1006, dev sda1:8, commit interval 5 seconds
bash: [: missing `]'
hn@hn-desktop:~$ [    3.081435] EXT4-fs (sda1): delayed allocation enabled
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    3.081441] EXT4-fs: file extents enabled
bash: [: missing `]'
hn@hn-desktop:~$ [    3.093486] EXT4-fs: mballoc enabled
bash: [: missing `]'
hn@hn-desktop:~$ [    3.093519] EXT4-fs (sda1): mounted filesystem with ordered data mode
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    4.798645] udev: starting version 146
bash: [: missing `]'
hn@hn-desktop:~$ [    5.131734] intel_rng: Firmware space is locked read-only. If you can't or
> [    5.131737] intel_rng: don't want to disable this in firmware setup, and if
bash: [: missing `]'
hn@hn-desktop:~$ [    5.131739] intel_rng: you are certain that your system has a functional
bash: [: missing `]'
hn@hn-desktop:~$ [    5.131741] intel_rng: RNG, try using the 'no_fwh_detect' option.
bash: [: missing `]'
hn@hn-desktop:~$ [    5.356439] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
bash: [: missing `]'
hn@hn-desktop:~$ [    5.580242] parport_pc 00:08: reported by Plug and Play ACPIbash: [: missing `]'
hn@hn-desktop:~$ [    5.580299] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
bash: [: missing `]'
hn@hn-desktop:~$ [    5.750012] ppdev: user-space paralle
bash: [: missing `]'
hn@hn-desktop:~$ [    7.236459]   all
bash: [: missing `]'
hn@hn-desktop:~$ [    7.236465]   alloc kstat_irqs on node -1
bash: [: missing `]'
hn@hn-desktop:~$ [    7.236476] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    7.236528] Intel ICH 0000:00:1f.5: setting latency timer to 64
bash: [: missing `]'
hn@hn-desktop:~$ [    7.664020] intel8x0_measure_ac97_clock: measured 55966 usecs (2696 samples)
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    7.664025] intel8x0: clocking to 48000
bash: [: missing `]'
hn@hn-desktop:~$ [    8.410340] lp0: using parport0 (interrupt-driven).
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [    9.188350] Adding 2955920k swap on /dev/sda5.  Priority:-1 extents:1 across:2955920k 
bash: [: missing `]'
hn@hn-desktop:~$ [    9.894931] EXT4-fs (sda1): internal journal on sda1:8
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   11.668081] type=1505 audit(1252609449.285:2): operation="
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   11.866340] type=1505 audit(1252609449.481:3): operation="profile_load" pid=1805 name=/sbin/dhclient3
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   11.866654] type=1505 audit(1252609449.481:4): operation="profile_load" pid=1805 name=/usr/lib/NetworkManager/nm-dhcp-client.action
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   11.866849] type=1505 audit(1252609449.481:5): operation="profile_load" pid=1805 name=/usr/lib/connman/scripts/dhclient-script
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   12.236371] type=1505 audit(1252609449.853:6): operation="profile_load" pid=1806 name=/usr/lib/cups/backend/cups-pdf
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   12.236786] type=1505 audit(1252609449.853:7): operation="profile_load" pid=1806 name=/usr/sbin/cupsd
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   12.342391] type=1505 audit(1252609449.957:8): operation="profile_load" pid=1807 name=/usr/sbin/tcpdump
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   21.502963] type=1505 audit(1252609459.117:9): operation="profile_load" pid=1808 name=/usr/bin/evince
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   21.508574] type=1505 audit(1252609459.125:10): operation="profile_load" pid=1808 name=/usr/bin/evince-previewer
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   21.510292] type=1505 audit(1252609459.125:11): operation="profile_load" pid=1808 name=/usr/bin/evince-thumbnailer
bash: syntax error near unexpected token `('
hn@hn-desktop:~$ [   30.397658] i2c-adapter i2c-0: unable to read EDID block.
bash: [: missing `]'
hn@hn-desktop:~$ [   30.397665] i915 00
bash: [: missing `]'
hn@hn-desktop:~$

-- 
Low screen resolution using Ubuntu 9.10 Alpha 3, Alpha 4, and Alpha 5
https://bugs.launchpad.net/bugs/408588
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in ubuntu.