ubuntu-x-swat team mailing list archive

Thread
Date
[Bug 13591] Re: bad resolution detected by xorg for a LCD monitor

To: ubuntu-x-swat@xxxxxxxxxxxxxxxxxxx
From: tapio <rhcg5511a@xxxxxxxxx>
Date: Fri, 01 Jan 2010 19:29:08 -0000
Reply-to: Bug 13591 <13591@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
Using a Westinghouse L1928NV since dapper. Native resolution has not
been recognized since intrepid( xfce mid-session, IceWM mid-session,
gnome on reboot). The feisty LiveCD has no trouble detecting the native
1280x1040. the EDID tools recognize this resolution but don't trust it.

Xorg.0.log from karmic LiveCD:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux ubuntu 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 31 20:26:50 2009
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1039:6325:1043:8079 Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter rev 0, Mem @ 0xf0000000/134217728, 0xeb800000/131072, I/O @ 0x0000d800/128
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default sis Device 0"
		Driver	"sis"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default sis Screen 0"
		Device	"Builtin Default sis Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default sis Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default sis Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default sis Device 0"
(==) No monitor specified for screen "Builtin Default sis Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.10.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
	SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
	Volari V3XT/V5/V8/Duo (XG40)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis
(--) Assigning device section with no busID to primary device
(--) Chipset SIS650/M650/651/740 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 0.0.2
	ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.6.0.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@xxxxxxxxxxxxxxxx> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xD800
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SIS(0): Creating default Display subsection in Screen section
	"Builtin Default sis Screen 0" for depth/fbbpp 24/32
(==) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(WW) SIS(0): Could not find/read video BIOS
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0):          whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
		http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): DIMM0 is DDR SDRAM
(--) SIS(0): DIMM1 is DDR SDRAM
(--) SIS(0): DIMM2 is not installed
(--) SIS(0): DIMM3 is not installed
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 267.268 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xF0000000
(--) SIS(0): MMIO registers at 0xEB800000 (size 64K)
(--) SIS(0): VideoRAM: 32768 KB
(II) SIS(0): Using 32192K of framebuffer memory at offset 0K
(--) SIS(0): SiS650 revision ID 50 (650 A2 CA)
(--) SIS(0): Hardware supports one video overlay
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): Gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction is disabled
(--) SIS(0): Using Xv overlay by default on CRT1
(--) SIS(0): Memory bandwidth at 32 bpp is 534.536 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT1 DDC supported
(--) SIS(0): CRT1 DDC level: 2 
(--) SIS(0): CRT1 DDC reading failed
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 32768 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6325
(II) SIS(0): VESA VBE OEM Product Rev: 1.05.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level 2
(II) SIS(0): VESA VBE DDC transfer in appr. 1 sec.
(II) SIS(0): VESA VBE DDC read failed
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 340 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Using real widescreen modes for CRT1 VGA devices
(II) SIS(0): 	Use option "ForceCRT1VGAAspect" to overrule
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
(II) SIS(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(WW) SIS(0): Unable to estimate virtual size
(II) SIS(0): Clock range:  10.00 to 340.00 MHz
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x400" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "320x200" (vrefresh out of range)
(II) SIS(0): Not using default mode "512x384" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x480" (hsync out of range)
(II) SIS(0): Not using default mode "800x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (hsync out of range)
(II) SIS(0): Not using default mode "856x480" (hsync out of range)
(II) SIS(0): Not using default mode "1360x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1680x1050" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(II) SIS(0): Not using default mode "1280x854" (hsync out of range)
(--) SIS(0): Virtual size is 960x600 (pitch 960)
(**) SIS(0): *Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x600"x60.0   41.50  960 1008 1088 1120  600 603 609 618 +hsync +vsync (37.1 kHz)
(**) SIS(0): *Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz
(II) SIS(0): Modeline "960x540"x60.0   37.29  960 976 1008 1104  540 543 549 563 +hsync +vsync (33.8 kHz)
(**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"x60.3   39.97  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600"x56.3   36.06  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SIS(0): *Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "768x576"x60.1   35.00  768 792 872 976  576 578 581 597 +hsync +vsync (35.9 kHz)
(**) SIS(0): *Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz
(II) SIS(0): Modeline "720x576"x60.1   32.73  720 744 816 912  576 578 581 597 +hsync +vsync (35.9 kHz)
(**) SIS(0): *Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
(II) SIS(0): Modeline "856x480"x59.8   33.94  856 872 1000 1072  480 492 495 529 -hsync -vsync (31.7 kHz)
(**) SIS(0): *Default mode "800x480": 39.8 MHz, 37.7 kHz, 60.0 Hz
(II) SIS(0): Modeline "800x480"x60.0   39.77  800 840 968 1056  480 552 556 628 +hsync +vsync (37.7 kHz)
(**) SIS(0): *Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz
(II) SIS(0): Modeline "720x480"x61.0   28.28  720 728 840 896  480 490 492 517 -hsync -vsync (31.6 kHz)
(**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480"x59.7   25.06  640 656 752 800  480 490 492 525 -hsync -vsync (31.3 kHz)
(**) SIS(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300"x60.3   19.98  400 416 480 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SIS(0): *Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240"x60.7   12.53  320 328 376 400  240 245 246 258 doublescan -hsync -vsync (31.3 kHz)
(==) SIS(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): 2D acceleration enabled
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 32768 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6325
(II) SIS(0): VESA VBE OEM Product Rev: 1.05.00
(II) SIS(0): Setting standard mode 0x22
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (959,8582)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	8x8 color pattern filled rectangles
	Solid Lines
	Dashed Lines
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		15 512x512 slots
		32 8x8 color pattern slots
(--) SIS(0): CPU frequency 2017.64Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): 	Checked libc memcpy()... 	29.3 MiB/s
(--) SIS(0): 	Checked built-in-1 memcpy()... 	29.3 MiB/s
(--) SIS(0): 	Checked built-in-2 memcpy()... 	16.4 MiB/s
(--) SIS(0): 	Checked MMX memcpy()... 	152.2 MiB/s
(--) SIS(0): 	Checked MMX2 memcpy()... 	155.9 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv by default on CRT1
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.4, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device ImExPS/2 Logitech Wheel Mouse
(**) ImExPS/2 Logitech Wheel Mouse: always reports core events
(**) ImExPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) ImExPS/2 Logitech Wheel Mouse: Found 9 mouse buttons
(II) ImExPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) SIS(0): Restoring by setting old mode 0x03
(II) Open ACPI successful (/var/run/acpid.socket)
(II) SIS(0): Setting standard mode 0x22
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ImExPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) SIS(0): Restoring by setting old mode 0x03
(II) Open ACPI successful (/var/run/acpid.socket)
(II) SIS(0): Setting standard mode 0x22
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ImExPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.

-- 
bad resolution detected by xorg for a LCD monitor
https://bugs.launchpad.net/bugs/13591
You received this bug notification because you are a member of Ubuntu-X,
which is a direct subscriber.