ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #43472
[Bug 301958] Re: [needs-packaging] no working driver for sis 671/771 video cards
Hi Antonio,
To confirm....I have tried the driver on the link you provided...(in
fact that was the driver I was trying!) but thanks!
The driver detects the Video Adapter but the integrated LCD panel still
doesn't work. when I try to run X screen flashes several times and ends
up with Mode Pool Empty. The LCD still detected but says max res 0x0
pref 0x0.
Xorg.log reports:
(EE) Screen(s) found, but none have a usable configuration.
I believe that is due to lack of EDID information for the integrated LCD
Screen. Modelines /Modes and HorizSync/VertRefresh lines dont appear to
override it.
here is the output from I from get-edid:
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0xc2d66 "SiS"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination does not support DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
As I said in my last post if I connect a monitor to VGA port and configure X to use it - the EDID is detected and screen is configured correctly.
Many thanks for your help.
--
[needs-packaging] no working driver for sis 671/771 video cards
https://bugs.launchpad.net/bugs/301958
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-sis in ubuntu.