ubuntu-x-swat team mailing list archive

[ASK <komandooru.arun@xxxxxxxxx>]

Penmount 9000 RS232 + Ubuntu 7.04 + Penmount Ubuntu drivers 2.0 = X
crashes (not always) and restarts by itself inconsistently....


After installing penmount drivers, the X crashes/restarts automatically on ubuntu 7.04 Desktop Edition. 

We see in syslog “repro gdm[4895]: gdm_slave_xioerror_handler: Fatal X
error - Restarting :0 “

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2

CPU：Intel Celeron M 1.5 GHz   RAM：1GB
Motherboard：Intel 915GM express chipset 
VGA Chip & Driver：Mobile 915GM/GMS/910GML Express

Touch panet   □ 5-Wire

Model AFL-15B-915-CM370/WT-R/1GB-R11


Xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier	"PenMount"
	Driver		"penmount"
	Option		"Protocol"		"PM9000"
	Option		"Device"		"/dev/ttyS3"
	Option		"PMode"			"1"
	Option		"MinX"			"10"
	Option		"MaxX"			"1000"
	Option		"MinY"			"10"
	Option		"MaxY"			"1000"
	Option		"ADBit"			"10"
	Option		"Baudrate"		"19200"
	Option		"Beep"			"1"		#  0 = no beep, 1 = beep enabled
	Option		"PressVol"		"100"	#  volume of beep (press event)
	Option		"PressPitch"	"880"	#  pitch of beep (press event)
	Option		"PressDur"		"15"	#  length of beep in 10ms (press event)
	Option		"ReleaseVol"	"0"		#  volume of beep (release event)
	Option		"ReleasePitch"	"1200"	#  pitch of beep (release event)
	Option		"ReleaseDur"	"10"	#  len of beep in 10ms (release event)
	Option		"RightButton"	"0"	#  right button active in ms
	Option		"RightButtonStart"	"500"	#  right button active in ms
	Option		"RightButtonEnd"	"900"	#  right button inactive in ms
EndSection

Section "Device"
	Identifier	"Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
	Driver		"i810"
	BusID		"PCI:0:2:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	28-51
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
	InputDevice    "Penmount" "AlwaysCore"
EndSection

Section "DRI"
	Mode	0666
EndSection

-- 
no working driver, problem with hal
https://bugs.launchpad.net/bugs/293485
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-penmount in ubuntu.