ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #47038
[Bug 526533] Re: Intel gpu problems
dmesg output
input/input0
[ 0.593483] ACPI: Lid Switch [LID0]
[ 0.593534] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.593537] ACPI: Power Button [PWRB]
[ 0.593602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.593605] ACPI: Power Button [PWRF]
[ 0.594499] ACPI: SSDT bf6d94b8 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.595352] ACPI: SSDT bf6d8e49 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.599341] Monitor-Mwait will be used to enter C-1 state
[ 0.599386] Monitor-Mwait will be used to enter C-2 state
[ 0.599397] Marking TSC unstable due to TSC halts in idle
[ 0.599451] Switching to clocksource hpet
[ 0.600080] ACPI: SSDT bf6d9732 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.600737] ACPI: SSDT bf6d9433 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.621346] isapnp: Scanning for PnP cards...
[ 0.644672] ACPI: Battery Slot [BAT1] (battery present)
[ 0.975541] isapnp: No Plug & Play device found
[ 0.976871] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.978418] brd: module loaded
[ 0.978956] loop: module loaded
[ 0.979048] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.979157] ahci 0000:00:1f.2: version 3.0
[ 0.979177] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.979224] alloc irq_desc for 28 on node -1
[ 0.979227] alloc kstat_irqs on node -1
[ 0.979241] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.979322] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.979327] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.979333] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.979636] scsi0 : ahci
[ 0.979746] scsi1 : ahci
[ 0.979817] scsi2 : ahci
[ 0.979999] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 28
[ 0.980004] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 28
[ 0.980009] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 28
[ 0.980083] ata_piix 0000:00:1f.1: version 2.13
[ 0.980096] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.980149] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.980242] scsi3 : ata_piix
[ 0.980316] scsi4 : ata_piix
[ 0.981135] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.981139] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.982254] Fixed MDIO Bus: probed
[ 0.982294] PPP generic driver version 2.4.2
[ 0.982410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.982435] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.982457] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.982461] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.982498] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.982535] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.986436] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.986460] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc504800
[ 1.000025] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.000139] hub 1-0:1.0: USB hub found
[ 1.000144] hub 1-0:1.0: 4 ports detected
[ 1.000212] alloc irq_desc for 23 on node -1
[ 1.000214] alloc kstat_irqs on node -1
[ 1.000221] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.000236] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.000240] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.000278] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.000311] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.004194] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.004210] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
[ 1.016021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.016128] hub 2-0:1.0: USB hub found
[ 1.016133] hub 2-0:1.0: 6 ports detected
[ 1.016207] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.016228] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.016262] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.016271] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.016275] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.016314] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.016356] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.016485] hub 3-0:1.0: USB hub found
[ 1.016490] hub 3-0:1.0: 2 ports detected
[ 1.016540] alloc irq_desc for 21 on node -1
[ 1.016543] alloc kstat_irqs on node -1
[ 1.016548] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.016556] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.016560] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.016592] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.016632] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.016747] hub 4-0:1.0: USB hub found
[ 1.016752] hub 4-0:1.0: 2 ports detected
[ 1.016802] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.016809] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.016813] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.016851] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.016881] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.016997] hub 5-0:1.0: USB hub found
[ 1.017017] hub 5-0:1.0: 2 ports detected
[ 1.017069] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.017076] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.017080] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.017111] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.017153] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.017273] hub 6-0:1.0: USB hub found
[ 1.017278] hub 6-0:1.0: 2 ports detected
[ 1.017328] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.017336] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.017340] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.017373] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.017404] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.017522] hub 7-0:1.0: USB hub found
[ 1.017526] hub 7-0:1.0: 2 ports detected
[ 1.017641] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.040956] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.040966] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.041099] mice: PS/2 mouse device common for all mice
[ 1.042122] rtc_cmos 00:07: RTC can wake from S4
[ 1.042163] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.042199] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.042318] device-mapper: uevent: version 1.0.3
[ 1.042441] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@xxxxxxxxxx
[ 1.042536] device-mapper: multipath: version 1.1.1 loaded
[ 1.042539] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.042677] EISA: Probing bus 0 at eisa.0
[ 1.042685] Cannot allocate resource for EISA slot 1
[ 1.042687] Cannot allocate resource for EISA slot 2
[ 1.042690] Cannot allocate resource for EISA slot 3
[ 1.042692] Cannot allocate resource for EISA slot 4
[ 1.042694] Cannot allocate resource for EISA slot 5
[ 1.042710] EISA: Detected 0 cards.
[ 1.042881] cpuidle: using governor ladder
[ 1.042980] cpuidle: using governor menu
[ 1.043436] TCP cubic registered
[ 1.043609] NET: Registered protocol family 10
[ 1.044055] lo: Disabled Privacy Extensions
[ 1.044366] NET: Registered protocol family 17
[ 1.044388] Bluetooth: L2CAP ver 2.14
[ 1.044390] Bluetooth: L2CAP socket layer initialized
[ 1.044393] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.044395] Bluetooth: SCO socket layer initialized
[ 1.044446] Bluetooth: RFCOMM TTY layer initialized
[ 1.044450] Bluetooth: RFCOMM socket layer initialized
[ 1.044452] Bluetooth: RFCOMM ver 1.11
[ 1.045388] Using IPI No-Shortcut mode
[ 1.045484] PM: Resume from disk failed.
[ 1.045498] registered taskstats version 1
[ 1.046030] Magic number: 14:837:477
[ 1.046138] rtc_cmos 00:07: setting system clock to 2010-02-25 10:27:06 UTC (1267093626)
[ 1.046141] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.046144] EDD information not available.
[ 1.060829] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.147981] ata4.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, ED01, max UDMA/33
[ 1.164309] ata4.00: configured for UDMA/33
[ 1.300076] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.300102] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.301801] ata1.00: unexpected _GTF length (8)
[ 1.301867] ata1.00: ATA-7: ST9160821AS, 3.CLH, max UDMA/100
[ 1.301870] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.302751] ata1.00: unexpected _GTF length (8)
[ 1.302846] ata1.00: configured for UDMA/100
[ 1.304067] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.317193] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.CL PQ: 0 ANSI: 5
[ 1.317339] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.317389] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.317455] sd 0:0:0:0: [sda] Write Protect is off
[ 1.317458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.317486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.317650] sda:
[ 1.323647] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N ED01 PQ: 0 ANSI: 5
[ 1.334644] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.334647] Uniform CD-ROM driver Revision: 3.20
[ 1.334748] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.334797] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.363658] sda1 < sda5 sda6 > sda2 sda3
[ 1.389458] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.389511] Freeing unused kernel memory: 604k freed
[ 1.389918] Write protecting the kernel text: 4728k
[ 1.389980] Write protecting the kernel read-only data: 2000k
[ 1.425053] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.543890] tg3.c:v3.106 (January 12, 2010)
[ 1.543929] tg3 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.543948] tg3 0000:06:00.0: setting latency timer to 64
[ 1.604511] alloc irq_desc for 22 on node -1
[ 1.604515] alloc kstat_irqs on node -1
[ 1.604524] ohci1394 0000:08:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.662070] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc200000-fc2007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.669363] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1e:ec:08:f9:89
[ 1.669367] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 1.669371] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.669374] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.916051] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 2.015723] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.321060] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 2.936629] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f83ac40edf3]
[ 6.237621] Adding 4024240k swap on /dev/sda6. Priority:-1 extents:1 across:4024240k
[ 7.466022] udev: starting version 151
[ 10.011414] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.013147] usbcore: registered new interface driver btusb
[ 10.165938] cfg80211: Calling CRDA to update world regulatory domain
[ 10.205341] sdhci: Secure Digital Host Controller Interface driver
[ 10.205346] sdhci: Copyright(c) Pierre Ossman
[ 10.341744] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 10.341748] ricoh-mmc: Copyright(c) Philip Langdale
[ 10.341793] ricoh-mmc: Ricoh MMC controller found at 0000:08:06.2 [1180:0843] (rev 1)
[ 10.341815] ricoh-mmc: Controller is now disabled.
[ 10.354880] sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 19)
[ 10.354905] sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 10.357066] Registered led device: mmc0::
[ 10.358137] mmc0: SDHCI controller on PCI [0000:08:06.1] using PIO
[ 10.362423] Linux video capture interface: v2.00
[ 10.457990] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013)
[ 10.460799] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input5
[ 10.460945] usbcore: registered new interface driver uvcvideo
[ 10.460948] USB Video Class driver (v0.1.0)
[ 10.803525] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33-020633rc8-generic-ks
[ 10.803530] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 10.803636] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.803653] iwl3945 0000:04:00.0: setting latency timer to 64
[ 10.820170] cfg80211: World regulatory domain updated:
[ 10.820174] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.820178] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.820181] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.820184] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.820187] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.820190] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.859103] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 10.859109] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 10.859230] alloc irq_desc for 29 on node -1
[ 10.859232] alloc kstat_irqs on node -1
[ 10.859267] iwl3945 0000:04:00.0: irq 29 for MSI/MSI-X
[ 10.938107] Linux agpgart interface v0.103
[ 10.953529] lp: driver loaded but no devices found
[ 11.115337] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 11.115792] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 11.122192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 11.205177] [drm] Initialized drm 1.1.0 20060810
[ 11.344153] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.344161] i915 0000:00:02.0: setting latency timer to 64
[ 11.350019] alloc irq_desc for 30 on node -1
[ 11.350024] alloc kstat_irqs on node -1
[ 11.350034] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 11.350042] [drm] set up 7M of stolen space
[ 11.460369] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04711/0xa00000
[ 11.475722] [drm] initialized overlay support
[ 11.527045] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 11.548311] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 11.760562] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.760567] Bluetooth: BNEP filters: protocol multicast
[ 12.135809] fb0: inteldrmfb frame buffer device
[ 12.135813] registered panic notifier
[ 12.138260] Bridge firewalling registered
[ 12.149465] acpi device:07: registered as cooling_device2
[ 12.149770] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 12.149819] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.149864] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.457724] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.458419] alloc irq_desc for 31 on node -1
[ 12.458424] alloc kstat_irqs on node -1
[ 12.458442] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 12.458486] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.705867] Console: switching to colour frame buffer device 160x50
[ 12.723222] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 16.013828] iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 16.652607] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 16.737983] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.739806] alloc irq_desc for 32 on node -1
[ 16.739811] alloc kstat_irqs on node -1
[ 16.739844] tg3 0000:06:00.0: irq 32 for MSI/MSI-X
[ 16.769807] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.142617] ppdev: user-space parallel port driver
[ 61.008591] wlan0: direct probe to AP 00:04:e2:d4:3c:72 (try 1)
[ 61.010177] wlan0: direct probe responded
[ 61.010184] wlan0: authenticate with AP 00:04:e2:d4:3c:72 (try 1)
[ 61.011818] wlan0: authenticated
[ 61.011843] wlan0: associate with AP 00:04:e2:d4:3c:72 (try 1)
[ 61.014094] wlan0: RX AssocResp from 00:04:e2:d4:3c:72 (capab=0x471 status=0 aid=1)
[ 61.014097] wlan0: associated
[ 61.015593] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 64.295420] padlock: VIA PadLock not detected.
[ 71.116027] wlan0: no IPv6 routers present
[ 3458.464058] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 3458.464076] render error detected, EIR: 0x00000000
[ 3458.464123] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 496182 at 496179)
[ 3459.388095] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 3459.388108] render error detected, EIR: 0x00000000
[ 3459.388156] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 496184 at 496183)
[ 3460.501025] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 3460.501034] render error detected, EIR: 0x00000000
[ 3460.501071] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 496309 at 496308)
[ 3461.841124] wlan0: deauthenticating from 00:04:e2:d4:3c:72 by local choice (reason=3)
[ 3462.897288] PM: Syncing filesystems ... done.
[ 3462.932055] PM: Preparing system for mem sleep
[ 3463.308323] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 3463.324068] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 3463.340057] PM: Entering mem sleep
[ 3463.340073] Suspending console(s) (use no_console_suspend to debug)
[ 3463.390819] btusb_intr_complete: hci0 urb f648fa80 failed to resubmit (1)
[ 3463.391809] btusb_bulk_complete: hci0 urb f648f780 failed to resubmit (1)
[ 3463.392810] btusb_bulk_complete: hci0 urb f648fe80 failed to resubmit (1)
[ 3463.440074] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3463.440161] sd 0:0:0:0: [sda] Stopping disk
[ 3465.717911] ACPI handle has no context!
[ 3465.718980] ACPI handle has no context!
[ 3465.718988] sdhci-pci 0000:08:06.1: PCI INT B disabled
[ 3465.718996] ACPI handle has no context!
[ 3465.737077] ACPI handle has no context!
[ 3465.832183] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 3465.832195] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 3465.832204] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 3465.832213] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 3465.832221] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 3466.040098] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 3466.056074] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 3466.056083] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 3466.056091] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 3466.117113] PM: suspend of devices complete after 2776.790 msecs
[ 3466.117117] PM: suspend devices took 2.776 seconds
[ 3466.117254] ricoh-mmc: Suspending.
[ 3466.117264] ricoh-mmc: Controller is now re-enabled.
[ 3466.148115] PM: late suspend of devices complete after 30.992 msecs
[ 3466.148265] ACPI: Preparing to enter system sleep state S3
[ 3466.169161] Disabling non-boot CPUs ...
[ 3466.217107] Broke affinity for irq 1
[ 3466.217159] Broke affinity for irq 19
[ 3466.217169] Broke affinity for irq 21
[ 3466.320032] CPU 1 is now offline
[ 3466.320036] SMP alternatives: switching to UP code
[ 3466.326959] Extended CMOS year: 2000
[ 3466.326959] Back to C!
[ 3466.326959] CPU0: Thermal monitoring handled by SMI
[ 3466.326959] Extended CMOS year: 2000
[ 3466.326959] Enabling non-boot CPUs ...
[ 3466.326959] SMP alternatives: switching to SMP code
[ 3466.333531] Booting Node 0 Processor 1 APIC 0x1
[ 3466.326896] Initializing CPU#1
[ 3466.326896] CPU1: Thermal monitoring handled by SMI
[ 3466.452496] CPU1 is up
[ 3466.452971] ACPI: Waking up from system sleep state S3
[ 3466.453987] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 3466.454003] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 3466.454039] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 3466.454076] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3466.454113] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3466.454160] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 3466.454220] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 3466.454273] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
[ 3466.454287] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 3466.454357] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
[ 3466.454372] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 3466.454453] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 3466.454523] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20005050, writing 0x5050)
[ 3466.454537] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 3466.454605] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3466.454641] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3466.454677] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3466.454724] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 3466.454863] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 3466.454913] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 3466.454972] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xc0000000)
[ 3466.455054] iwl3945 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 3466.455125] iwl3945 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000)
[ 3466.455139] iwl3945 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3466.455159] iwl3945 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[ 3466.455371] tg3 0000:06:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffb0000)
[ 3466.455424] tg3 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 3466.455442] tg3 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100106)
[ 3466.455656] ricoh-mmc: Resuming.
[ 3466.455666] ricoh-mmc: Controller is now disabled.
[ 3466.468024] pci 0000:08:06.4: Refused to change power state, currently in D3
[ 3466.468107] PM: early resume of devices complete after 14.164 msecs
[ 3466.602433] i915 0000:00:02.0: setting latency timer to 64
[ 3466.696218] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3466.696226] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3466.696256] usb usb3: root hub lost power or was reset
[ 3466.696278] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3466.696285] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3466.696313] usb usb4: root hub lost power or was reset
[ 3466.696346] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3466.696353] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3466.696388] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3466.696395] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3466.696447] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 3466.696496] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3466.696503] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3466.696530] usb usb5: root hub lost power or was reset
[ 3466.696551] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3466.696558] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3466.696586] usb usb6: root hub lost power or was reset
[ 3466.696616] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3466.696624] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3466.696651] usb usb7: root hub lost power or was reset
[ 3466.696671] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3466.696679] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3466.696717] pci 0000:00:1e.0: setting latency timer to 64
[ 3466.696728] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3466.696734] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3466.696883] ahci 0000:00:1f.2: setting latency timer to 64
[ 3466.754070] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fc200000-fc2007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3466.760078] sdhci-pci 0000:08:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 3466.868449] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 3466.868453] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 3466.884347] ata4.00: configured for UDMA/33
[ 3467.016101] ata2: SATA link down (SStatus 0 SControl 300)
[ 3467.016113] ata3: SATA link down (SStatus 0 SControl 300)
[ 3467.767335] sd 0:0:0:0: [sda] Starting disk
[ 3468.641434] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3468.642469] ata1.00: unexpected _GTF length (8)
[ 3468.643822] ata1.00: unexpected _GTF length (8)
[ 3468.643915] ata1.00: configured for UDMA/100
[ 3468.788044] usb 1-4: reset high speed USB device using ehci_hcd and address 3
[ 3469.096042] usb 4-1: reset full speed USB device using uhci_hcd and address 2
[ 3469.412041] usb 6-2: reset full speed USB device using uhci_hcd and address 2
[ 3469.563069] btusb 6-2:1.0: no reset_resume for driver btusb?
[ 3469.563071] btusb 6-2:1.1: no reset_resume for driver btusb?
[ 3469.812175] PM: resume of devices complete after 3343.879 msecs
[ 3469.812459] PM: resume devices took 3.344 seconds
[ 3469.812497] PM: Finishing wakeup.
[ 3469.812499] Restarting tasks ... done.
[ 3470.792989] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3470.794978] tg3 0000:06:00.0: irq 32 for MSI/MSI-X
[ 3470.825293] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3472.043301] wlan0: direct probe to AP 00:04:e2:d4:3c:72 (try 1)
[ 3472.044968] wlan0: direct probe responded
[ 3472.044978] wlan0: authenticate with AP 00:04:e2:d4:3c:72 (try 1)
[ 3472.046591] wlan0: authenticated
[ 3472.046633] wlan0: associate with AP 00:04:e2:d4:3c:72 (try 1)
[ 3472.048912] wlan0: RX AssocResp from 00:04:e2:d4:3c:72 (capab=0x471 status=0 aid=1)
[ 3472.048919] wlan0: associated
[ 3472.052116] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3482.300057] wlan0: no IPv6 routers present
--
Intel gpu problems
https://bugs.launchpad.net/bugs/526533
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in ubuntu.
References
