← Back to team overview

ubuntu-x-swat team mailing list archive

  1. ubuntu-x-swat team
  2. Mailing list archive
  3. Message #60455

[Bug 552644] Re: Lucid Lynx 64 bit nightly build hangs on boot

  Thread Previous • Date Previous • • Thread Next 
NO JOY - Please see inline paste of

more /var/log/Xorg.0.log
/etc/X11/xorg.conf
/etc/default/grub

following my comments.  Posting this from other machine - after fglrx is
installed and the system shut down and restarted, hang on boot with
black screen except for single underline cursor in upper left corner.  I
don't know why it showed as being uninstalled before, the other
Xorg.0.log must have been overwritten when the driver was uninstalled.
To be sure that didn't happen this time, I am copy/pasting while the
machine is still up with a hung console.

Regarding Alf's comment: after these logs were pasted, I verified the
power button (not reset) does indeed shut the system down if held in
while the system is in this state.

htop reports 136% CPU and 0.1% MEM on PID 1465 owned by root:

 /usr/bin/X :0 -br -verbose -auth /var/run/gdm/auth-for-gdm-
sLHaIA/database -nolisten tcp

sudo ls -l /usr/lib/xorg/extra-modules/modules/drivers/
total 9120
-rw-r--r-- 1 root root 9337664 2010-03-30 23:28 fglrx_drv.so

more /var/log/Xorg.0.log

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux Lochley 2.6.32-19-generic #28-Ubuntu SMP Thu Apr 1 10:39:41 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-19-generic root=UUID=8734a3a4-ed2c-4b1d-9a7f-9ece9ddc3e26 ro quiet
Build Date: 30 March 2010  10:29:28PM
xorg-server 2:1.7.6-2ubuntu1 (Timo Aaltonen <tjaalton@xxxxxxxxxx>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr  8 19:51:40 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7ca300
(II) Loader magic: 0x7ca300
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 8

(--) PCI:*(0:4:0:0) 1002:689c:1002:2542 ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xfb8c0000/131072, I/O @ 0x00008000/256, BIOS @ 0x????????/131072
(--) PCI: (0:5:0:0) 1002:689c:1002:2042 ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xfb9e0000/131072, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.10
	Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.7.1, module version = 8.72.10
(II) ATI Proprietary Linux Driver Version Identifier:8.72.10
(II) ATI Proprietary Linux Driver Release Identifier: 8.72.1                               
(II) ATI Proprietary Linux Driver Build Date: Mar 10 2010 23:41:33
(II) Primary Device is: PCI 04@00:00:0
(WW) Falling back to old probe method for fglrx
(II) PCS database file /etc/ati/amdpcsdb not found
(II)   Creating PCS database from initial defaults instead
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:0) found
(--) Chipset Supported AMD Graphics Processor (0x689C) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@4:0:1) found
(**) ChipID override: 0x689C
(**) Chipset Supported AMD Graphics Processor (0x689C) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0xfd1520
(II) pEnt->device->identifier=(nil)
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:4:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:4:0:0
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:5:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 12, (OK)
ukiOpenByBusid: ukiOpenMinor returns 12
ukiOpenByBusid: ukiGetBusid reports PCI:4:0:0
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is 12, (OK)
ukiOpenByBusid: ukiOpenMinor returns 12
ukiOpenByBusid: ukiGetBusid reports PCI:5:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 5900 Series" (Chipset = 0x689c)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2542)
(==) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xfb8c0000
(--) fglrx(0): I/O port at 0x00008000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 12.13
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: CYPRESS
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(--) fglrx(0): Chipset: "ATI Radeon HD 5900 Series" (Chipset = 0x689c)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2042)
(==) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfb9e0000
(--) fglrx(0): I/O port at 0x00009000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)

=================
more /etc/X11/xorg.conf

Section "Screen"
	Identifier	"Default Screen"
	DefaultDepth	24
EndSection

Section "Module"
	Load	"glx"
EndSection

Section "Device"
	Identifier	"Default Device"
	Driver	"fglrx"
EndSection

==============
more /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
# GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
# GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""

# Uncomment to disable graphical terminal (grub-pc only)
GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=1920x1200

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"

# Uncomment to get a beep at grub start
GRUB_INIT_TUNE="480 440 1"

=========================================

-- 
Lucid Lynx 64 bit nightly build hangs on boot
https://bugs.launchpad.net/bugs/552644
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to fglrx-installer in ubuntu.
  Thread Previous • Date Previous • • Thread Next