ubuntu-x-swat team mailing list archive

[Manuel Sanchez <manuel.antonio.sanchez@xxxxxxxxx>]

As by my previous post, I don't think this is a duplicate of Bug#552644,
since the latest update didn't fix it. It may be related, though.

** Description changed:

  After installing fglrx 2:8.721.0ubuntu10 on Lucid Lynx beta 1 and
  running 'aticonfig --initial', X (1.7.5) only displays a blank screen
  (system is running, can be ssh'ed in). This is the same effect
  experienced on a prior Karmic Koala installation with an older version
  of the driver. On the other hand, xorg's radeon driver runs properly
  (albeit without GL acceleration).
  
  When running 'aticonfig --query-monitor', I get the following output:
  Default Adapter - ATI Radeon HD 5400 Series
  #  Connected monitors: none
-   Enabled monitors: none
+   Enabled monitors: none
  
  If I run xrandr when using xorg's radeon driver, the display is detected:
  Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680
  HDMI-0 disconnected (normal left inverted right x axis y axis)
  DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 434mm x 270mm
-    1680x1050      59.9*+
-    1280x1024      75.0     60.0  
-    1152x864       75.0  
-    1024x768       75.0     60.0  
-    800x600        75.0     60.3  
-    640x480        75.0     59.9  
-    720x400        70.1  
+    1680x1050      59.9*+
+    1280x1024      75.0     60.0
+    1152x864       75.0
+    1024x768       75.0     60.0
+    800x600        75.0     60.3
+    640x480        75.0     59.9
+    720x400        70.1
  VGA-0 disconnected (normal left inverted right x axis y axis)
  
  The card is a Saphire Radeon HD 5450 (512 DDR3 model) with 3 outputs:
  DVI, HDMI and VGA. The DVI output is connected to a DELL 2005 FPW
  monitor, with 1680x1050 native resolution.
  
  Please advice if any other information is necessary.
  
  Regards
  
  Manuel
  
  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: fglrx 2:8.721-0ubuntu10
  ProcVersionSignature: Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1
  Uname: Linux 2.6.32-19-generic i686
  NonfreeKernelModules: fglrx
  Architecture: i386
  CheckboxSubmission: 33a6ff8ffd30f8bd1df95c0b208fcb87
  CheckboxSystem: 6ce041aeed0a2c17b3343b66d157175d
  Date: Sun Apr 11 10:13:51 2010
  DkmsStatus: fglrx, 8.721, 2.6.32-19-generic, i686: installed
  InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release Candidate i386 (20091020.3)
  MachineType: HP-Pavilion RR498AA-ABU s7720.uk
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-19-generic root=UUID=31fcdf37-c8d7-4b82-be95-905814e9201d ro quiet splash
  ProcEnviron:
-  LANG=en_GB.utf8
-  SHELL=/bin/bash
+  LANG=en_GB.utf8
+  SHELL=/bin/bash
  SourcePackage: fglrx-installer
  dmi.bios.date: 12/18/2006
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 5.03
  dmi.board.name: Hematite
  dmi.board.vendor: ASUSTek Computer INC.
  dmi.board.version: 1.00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: 1111
  dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr5.03:bd12/18/2006:svnHP-Pavilion:pnRR498AA-ABUs7720.uk:pvr:rvnASUSTekComputerINC.:rnHematite:rvr1.00:cvnHewlett-Packard:ct3:cvr1111:
  dmi.product.name: RR498AA-ABU s7720.uk
  dmi.sys.vendor: HP-Pavilion
  glxinfo: Error: command ['glxinfo'] failed with exit code -11:
  system:
-  distro:             Ubuntu
-  codename:           lucid
-  architecture:       i686
-  kernel:             2.6.32-19-generic
+  distro:             Ubuntu
+  codename:           lucid
+  architecture:       i686
+  kernel:             2.6.32-19-generic

** This bug is no longer a duplicate of bug 552644
   Lucid Lynx 64 bit nightly build hangs on boot

-- 
fglrx fails to identify attached monitor, displays blank screen
https://bugs.launchpad.net/bugs/560570
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to fglrx-installer in ubuntu.