ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #70961
[Bug 577508] Re: gui crashes after screensaver changed (lucid)
I'll give it a try. I just (I believe) successfully sent a ubuntu-bug report about this problem so it may be redundant. This bug appears to have some of the same characteristics as Bug #541492 & #528467. But I'm new to all of this and not positive.
dmesg:
0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7fa000 (usable)
[ 0.000000] BIOS-e820: 000000003f7fa000 - 000000003f7fd000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7fd000 - 000000003f7fe000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7fe000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3f7fa max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FE0000000 write-back
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0F0000000 mask FF8000000 write-combining
[ 0.000000] 4 base 0E8000000 mask FF8000000 write-combining
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7fa000 (usable)
[ 0.000000] modified: 000000003f7fa000 - 000000003f7fd000 (ACPI data)
[ 0.000000] modified: 000000003f7fd000 - 000000003f7fe000 (ACPI NVS)
[ 0.000000] modified: 000000003f7fe000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 2f2a2000 - 2fa3b752
[ 0.000000] ACPI: RSDP 000f5c30 00014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 3f7fa000 00030 (v01 ASUS P4G533LA 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 3f7fa0b2 00074 (v01 ASUS P4G533LA 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 3f7fa126 02250 (v01 ASUS P4G533LA 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 3f7fd000 00040
[ 0.000000] ACPI: BOOT 3f7fa030 00028 (v01 ASUS P4G533LA 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 3f7fa058 0005A (v01 ASUS P4G533LA 42302E31 MSFT 31313031)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [002f2a2000 - 002fa3b752] RAMDISK ==> [002f2a2000 - 002fa3b752]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd138] BRK ==> [00008da000 - 00008dd138]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f7fa
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7fa
[ 0.000000] On node 0 totalpages: 259989
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32508 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf400000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257957
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=75252eea-e8d9-4bb0-93b5-306901835c39 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5201800 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7fa)
[ 0.000000] Memory: 1009576k/1040360k available (4673k kernel code, 29948k reserved, 2121k data, 656k init, 131056k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2490.690 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4981.38 BogoMIPS (lpj=9962760)
[ 0.004049] Security Framework initialized
[ 0.004095] AppArmor: AppArmor initialized
[ 0.004119] Mount-cache hash table entries: 512
[ 0.004390] Initializing cgroup subsys ns
[ 0.004404] Initializing cgroup subsys cpuacct
[ 0.004411] Initializing cgroup subsys memory
[ 0.004430] Initializing cgroup subsys devices
[ 0.004436] Initializing cgroup subsys freezer
[ 0.004440] Initializing cgroup subsys net_cls
[ 0.004489] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004497] CPU: L2 cache: 128K
[ 0.004501] CPU: Hyper-Threading is disabled
[ 0.004508] mce: CPU supports 4 MCE banks
[ 0.004524] CPU0: Thermal monitoring enabled (TM1)
[ 0.004548] Performance Events: no PMU driver, software events only.
[ 0.004562] Checking 'hlt' instruction... OK.
[ 0.021169] SMP alternatives: switching to UP code
[ 0.034040] Freeing SMP alternatives: 19k freed
[ 0.034082] ACPI: Core revision 20090903
[ 0.039281] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.039294] ftrace: allocating 21771 entries in 43 pages
[ 0.040190] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040379] alloc irq_desc for 22 on node 0
[ 0.040383] alloc kstat_irqs on node 0
[ 0.040521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081195] CPU0: Intel(R) Celeron(R) CPU 2.50GHz stepping 09
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (4981.38 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] devtmpfs: initialized
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 17:59:41 Date: 05/09/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084021] PCI: PCI BIOS revision 2.10 entry at 0xf1490, last bus=1
[ 0.084026] PCI: Using configuration type 1 for base access
[ 0.085949] bio: create slab <bio-0> at 0
[ 0.086762] ACPI: EC: Look up EC in DSDT
[ 0.090811] ACPI: Interpreter enabled
[ 0.090829] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.090877] ACPI: Using IOAPIC for interrupt routing
[ 0.108585] ACPI: No dock devices found.
[ 0.108810] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.108914] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.109012] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.109021] pci 0000:00:02.0: reg 14 32bit mmio: [0xe7800000-0xe787ffff]
[ 0.109153] pci 0000:00:1d.0: reg 20 io port: [0xd800-0xd81f]
[ 0.109218] pci 0000:00:1d.1: reg 20 io port: [0xd400-0xd41f]
[ 0.109280] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
[ 0.109352] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe7000000-0xe70003ff]
[ 0.109418] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.109427] pci 0000:00:1d.7: PME# disabled
[ 0.109498] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.109501] * this clock source is slow. If you are sure your timer does not have
[ 0.109502] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.109552] pci 0000:00:1f.0: Enabled i801 SMBus device
[ 0.109561] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[ 0.109566] pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
[ 0.109597] pci 0000:00:1f.1: reg 10 io port: [0xa800-0xa807]
[ 0.109605] pci 0000:00:1f.1: reg 14 io port: [0xa400-0xa403]
[ 0.109613] pci 0000:00:1f.1: reg 18 io port: [0xa000-0xa007]
[ 0.109622] pci 0000:00:1f.1: reg 1c io port: [0x9800-0x9803]
[ 0.109630] pci 0000:00:1f.1: reg 20 io port: [0x9400-0x940f]
[ 0.109638] pci 0000:00:1f.1: reg 24 32bit mmio: [0xe5800000-0xe58003ff]
[ 0.109700] pci 0000:00:1f.3: reg 20 io port: [0xe800-0xe81f]
[ 0.109754] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
[ 0.109762] pci 0000:00:1f.5: reg 14 io port: [0xe100-0xe13f]
[ 0.109770] pci 0000:00:1f.5: reg 18 32bit mmio: [0x000000-0x0001ff]
[ 0.109778] pci 0000:00:1f.5: reg 1c 32bit mmio: [0x000000-0x0000ff]
[ 0.109814] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.109820] pci 0000:00:1f.5: PME# disabled
[ 0.109886] pci 0000:01:0b.0: reg 10 32bit mmio: [0xe6800000-0xe68000ff]
[ 0.109896] pci 0000:01:0b.0: reg 14 io port: [0xb800-0xb807]
[ 0.109904] pci 0000:01:0b.0: reg 18 io port: [0xb400-0xb4ff]
[ 0.109946] pci 0000:01:0b.0: supports D2
[ 0.109948] pci 0000:01:0b.0: PME# supported from D2 D3hot D3cold
[ 0.109954] pci 0000:01:0b.0: PME# disabled
[ 0.109996] pci 0000:01:0d.0: reg 10 io port: [0xb000-0xb0ff]
[ 0.110005] pci 0000:01:0d.0: reg 14 32bit mmio: [0xe6000000-0xe60000ff]
[ 0.110050] pci 0000:01:0d.0: supports D1 D2
[ 0.110054] pci 0000:01:0d.0: PME# supported from D1 D2 D3hot D3cold
[ 0.110059] pci 0000:01:0d.0: PME# disabled
[ 0.110090] pci 0000:00:1e.0: transparent bridge
[ 0.110096] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.110102] pci 0000:00:1e.0: bridge 32bit mmio: [0xe6000000-0xe6ffffff]
[ 0.110116] pci_bus 0000:00: on NUMA node 0
[ 0.110129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.110284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.216738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.216941] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.217139] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.217338] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.217518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.217700] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.217879] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.218061] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.218317] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.218333] vgaarb: loaded
[ 0.218623] SCSI subsystem initialized
[ 0.218842] libata version 3.00 loaded.
[ 0.219098] usbcore: registered new interface driver usbfs
[ 0.219131] usbcore: registered new interface driver hub
[ 0.219245] usbcore: registered new device driver usb
[ 0.219682] ACPI: WMI: Mapper loaded
[ 0.219689] PCI: Using ACPI for IRQ routing
[ 0.219973] NetLabel: Initializing
[ 0.219980] NetLabel: domain hash size = 128
[ 0.219982] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.220042] NetLabel: unlabeled traffic allowed by default
[ 0.220158] Switching to clocksource tsc
[ 0.223280] AppArmor: AppArmor Filesystem Enabled
[ 0.223325] pnp: PnP ACPI init
[ 0.223365] ACPI: bus type pnp registered
[ 0.228672] pnp: PnP ACPI: found 14 devices
[ 0.228680] ACPI: ACPI bus type pnp unregistered
[ 0.228688] PnPBIOS: Disabled by ACPI PNP
[ 0.228714] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.228721] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.228726] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.228741] system 00:02: ioport range 0xe400-0xe47f has been reserved
[ 0.228748] system 00:02: ioport range 0xe800-0xe81f has been reserved
[ 0.228754] system 00:02: ioport range 0xec00-0xec3f has been reserved
[ 0.228758] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.228764] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.228768] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.228773] system 00:02: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.228786] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.228803] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.228820] system 00:0d: ioport range 0x3f0-0x3f1 has been reserved
[ 0.263892] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.263899] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.263906] pci 0000:00:1e.0: MEM window: 0xe6000000-0xe6ffffff
[ 0.263911] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.263933] pci 0000:00:1e.0: setting latency timer to 64
[ 0.263940] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.263944] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.263947] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.263951] pci_bus 0000:01: resource 1 mem: [0xe6000000-0xe6ffffff]
[ 0.263954] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.263957] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.264022] NET: Registered protocol family 2
[ 0.264186] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.264854] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.266615] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.267524] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.267530] TCP reno registered
[ 0.267820] NET: Registered protocol family 1
[ 0.267866] pci 0000:00:02.0: Boot video device
[ 0.268104] Simple Boot Flag at 0x3a set to 0x1
[ 0.268283] cpufreq-nforce2: No nForce2 chipset.
[ 0.268353] Scanning for low memory corruption every 60 seconds
[ 0.268633] audit: initializing netlink socket (disabled)
[ 0.268662] type=2000 audit(1273427981.267:1): initialized
[ 0.281847] Trying to unpack rootfs image as initramfs...
[ 0.296382] highmem bounce pool size: 64 pages
[ 0.296397] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.302588] VFS: Disk quotas dquot_6.5.2
[ 0.302735] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.304225] fuse init (API version 7.13)
[ 0.304501] msgmni has been set to 1716
[ 0.307996] alg: No test for stdrng (krng)
[ 0.308205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.308214] io scheduler noop registered
[ 0.308217] io scheduler anticipatory registered
[ 0.308219] io scheduler deadline registered
[ 0.308329] io scheduler cfq registered (default)
[ 0.308530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.308584] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.308763] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.308771] ACPI: Power Button [PWRB]
[ 0.308880] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.308888] ACPI: Power Button [PWRF]
[ 0.309120] ACPI: Invalid PBLK length [5]
[ 0.309211] processor LNXCPU:00: registered as cooling_device0
[ 0.335813] isapnp: Scanning for PnP cards...
[ 0.348428] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.348581] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349417] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.399782] brd: module loaded
[ 0.401104] loop: module loaded
[ 0.401362] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.401593] ata_piix 0000:00:1f.1: version 2.13
[ 0.401626] alloc irq_desc for 18 on node -1
[ 0.401630] alloc kstat_irqs on node -1
[ 0.401641] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.401717] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.403999] scsi0 : ata_piix
[ 0.404322] scsi1 : ata_piix
[ 0.405349] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x9400 irq 14
[ 0.405358] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x9408 irq 15
[ 0.406136] Fixed MDIO Bus: probed
[ 0.406216] PPP generic driver version 2.4.2
[ 0.406372] tun: Universal TUN/TAP device driver, 1.6
[ 0.406377] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.406638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.406688] ehci_hcd 0000:00:1d.7: enabling device (0004 -> 0006)
[ 0.406707] alloc irq_desc for 23 on node -1
[ 0.406711] alloc kstat_irqs on node -1
[ 0.406724] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.406757] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.406763] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.406877] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.406930] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.410838] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.416574] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe7000000
[ 0.439783] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.440046] usb usb1: configuration #1 chosen from 1 choice
[ 0.440123] hub 1-0:1.0: USB hub found
[ 0.440152] hub 1-0:1.0: 6 ports detected
[ 0.440283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.440320] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.440418] alloc irq_desc for 16 on node -1
[ 0.440423] alloc kstat_irqs on node -1
[ 0.440437] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440455] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.440462] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.440594] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.440652] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 0.440899] usb usb2: configuration #1 chosen from 1 choice
[ 0.440970] hub 2-0:1.0: USB hub found
[ 0.440999] hub 2-0:1.0: 2 ports detected
[ 0.441114] alloc irq_desc for 19 on node -1
[ 0.441120] alloc kstat_irqs on node -1
[ 0.441133] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.441149] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.441155] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.441285] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.441339] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
[ 0.441564] usb usb3: configuration #1 chosen from 1 choice
[ 0.441635] hub 3-0:1.0: USB hub found
[ 0.441661] hub 3-0:1.0: 2 ports detected
[ 0.441770] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.441791] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.441796] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.441927] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.441985] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 0.442235] usb usb4: configuration #1 chosen from 1 choice
[ 0.442310] hub 4-0:1.0: USB hub found
[ 0.442337] hub 4-0:1.0: 2 ports detected
[ 0.442534] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.442540] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.443507] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.448275] mice: PS/2 mouse device common for all mice
[ 0.448654] rtc_cmos 00:05: RTC can wake from S4
[ 0.448803] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.448845] rtc0: alarms up to one month, 242 bytes nvram
[ 0.449132] device-mapper: uevent: version 1.0.3
[ 0.449506] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.451930] device-mapper: multipath: version 1.1.0 loaded
[ 0.451939] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.454288] EISA: Probing bus 0 at eisa.0
[ 0.454333] EISA: Detected 0 cards.
[ 0.455975] cpuidle: using governor ladder
[ 0.455983] cpuidle: using governor menu
[ 0.456721] TCP cubic registered
[ 0.457065] NET: Registered protocol family 10
[ 0.457881] lo: Disabled Privacy Extensions
[ 0.458347] NET: Registered protocol family 17
[ 0.458484] Using IPI No-Shortcut mode
[ 0.458742] PM: Resume from disk failed.
[ 0.458775] registered taskstats version 1
[ 0.459047] Magic number: 10:913:996
[ 0.459165] rtc_cmos 00:05: setting system clock to 2010-05-09 17:59:42 UTC (1273427982)
[ 0.459171] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.459173] EDD information not available.
[ 0.515081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.612120] ata2.00: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0C, max UDMA/66
[ 0.612172] ata2.01: ATAPI: SONY CD-RW CRX215E5, 5.0E, max UDMA/33
[ 0.612209] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 0.628501] ata2.00: configured for UDMA/33
[ 0.644092] ata2.01: configured for UDMA/33
[ 0.800741] ata1.00: ATA-6: ST380012A, 4.06, max UDMA/100
[ 0.800748] ata1.00: 156301488 sectors, multi 16: LBA48
[ 0.801069] ata1.01: ATA-5: IC35L040AVVA07-0, VA2OA51A, max UDMA/100
[ 0.801074] ata1.01: 78165360 sectors, multi 16: LBA
[ 0.816414] ata1.00: configured for UDMA/100
[ 0.881266] ata1.01: configured for UDMA/100
[ 1.039691] isapnp: No Plug & Play device found
[ 1.040075] scsi 0:0:0:0: Direct-Access ATA ST380012A 4.06 PQ: 0 ANSI: 5
[ 1.040422] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.040805] scsi 0:0:1:0: Direct-Access ATA IC35L040AVVA07-0 VA2O PQ: 0 ANSI: 5
[ 1.041269] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.041737] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.042178] sd 0:0:0:0: [sda] Write Protect is off
[ 1.042186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.042306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.042481] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S BS0C PQ: 0 ANSI: 5
[ 1.043576] sda:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.048423] Uniform CD-ROM driver Revision: 3.20
[ 1.048702] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.048873] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 1.049182] sda1 sda2
[ 1.049745] sd 0:0:1:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.050390] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.050397] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.050648] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.050876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.051503] sdb:
[ 1.052034] scsi 1:0:1:0: CD-ROM SONY CD-RW CRX215E5 5.0E PQ: 0 ANSI: 5
[ 1.058585] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.058867] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.059033] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 1.066689] Freeing initrd memory: 7781k freed
[ 1.082818] sdb1 sdb2 < sdb5 >
[ 1.113455] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.113493] Freeing unused kernel memory: 656k freed
[ 1.114777] Write protecting the kernel text: 4676k
[ 1.114819] Write protecting the kernel read-only data: 1840k
[ 1.152131] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.170163] udev: starting version 151
[ 1.327541] usb 3-2: configuration #1 chosen from 1 choice
[ 1.431869] usbcore: registered new interface driver hiddev
[ 1.446481] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 1.447489] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 1.447590] usbcore: registered new interface driver usbhid
[ 1.448435] usbhid: v2.6:USB HID core driver
[ 1.568114] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.619083] Floppy drive(s): fd0 is 1.44M
[ 1.711195] FDC 0 is a post-1991 82077
[ 1.742094] usb 4-1: configuration #1 chosen from 1 choice
[ 1.787225] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.787273] 8139cp 0000:01:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.829598] 8139too Fast Ethernet driver 0.9.28
[ 1.829680] alloc irq_desc for 17 on node -1
[ 1.829686] alloc kstat_irqs on node -1
[ 1.829698] 8139too 0000:01:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.831038] eth0: RealTek RTL8139 at 0xb000, 00:0c:6e:5f:67:81, IRQ 17
[ 1.874918] Initializing USB Mass Storage driver...
[ 1.875222] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1.875796] usbcore: registered new interface driver usb-storage
[ 1.875804] USB Mass Storage support registered.
[ 1.877285] usb-storage: device found at 2
[ 1.877291] usb-storage: waiting for device to settle before scanning
[ 2.366307] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 6.877286] usb-storage: device scan complete
[ 6.880245] scsi 2:0:0:0: Direct-Access USB Reader 1.00 PQ: 0 ANSI: 0
[ 6.883229] scsi 2:0:0:1: Direct-Access USB Reader 1.01 PQ: 0 ANSI: 0
[ 6.886250] scsi 2:0:0:2: Direct-Access USB Reader 1.02 PQ: 0 ANSI: 0
[ 6.889238] scsi 2:0:0:3: Direct-Access USB Reader 1.03 PQ: 0 ANSI: 0
[ 6.890894] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 6.891367] sd 2:0:0:1: Attached scsi generic sg5 type 0
[ 6.891849] sd 2:0:0:2: Attached scsi generic sg6 type 0
[ 6.892390] sd 2:0:0:3: Attached scsi generic sg7 type 0
[ 7.074198] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 7.079191] sd 2:0:0:1: [sdd] Attached SCSI removable disk
[ 7.084215] sd 2:0:0:2: [sde] Attached SCSI removable disk
[ 7.089190] sd 2:0:0:3: [sdf] Attached SCSI removable disk
[ 11.001856] Adding 1648632k swap on /dev/sdb5. Priority:-1 extents:1 across:1648632k
[ 11.002837] udev: starting version 151
[ 11.128131] lp: driver loaded but no devices found
[ 11.521252] Linux agpgart interface v0.103
[ 11.578918] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.603278] intel_rng: FWH not detected
[ 11.641854] parport_pc 00:0a: reported by Plug and Play ACPI
[ 11.641949] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 11.660921] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 11.661143] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 11.663573] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 11.743377] lp0: using parport0 (interrupt-driven).
[ 12.558873] [drm] Initialized drm 1.1.0 20060810
[ 12.574546] ppdev: user-space parallel port driver
[ 12.814901] [drm] i915 disabling kernel modesetting for known bad device.
[ 12.814950] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.814958] pci 0000:00:02.0: setting latency timer to 64
[ 12.845961] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.859514] vga16fb: initializing
[ 12.859527] vga16fb: mapped to 0xc00a0000
[ 12.860108] fb0: VGA16 VGA frame buffer device
[ 13.105851] type=1505 audit(1273442395.144:2): operation="profile_load" pid=593 name="/sbin/dhclient3"
[ 13.106565] type=1505 audit(1273442395.144:3): operation="profile_load" pid=593 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.106939] type=1505 audit(1273442395.144:4): operation="profile_load" pid=593 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.609044] Console: switching to colour frame buffer device 80x30
[ 13.633941] Intel ICH 0000:00:1f.5: enabling device (0005 -> 0007)
[ 13.633958] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 13.634018] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 13.964072] intel8x0_measure_ac97_clock: measured 53064 usecs (2557 samples)
[ 13.964079] intel8x0: clocking to 48000
[ 14.119973] type=1505 audit(1273442396.156:5): operation="profile_load" pid=707 name="/usr/share/gdm/guest-session/Xsession"
[ 14.151511] type=1505 audit(1273442396.188:6): operation="profile_replace" pid=708 name="/sbin/dhclient3"
[ 14.200571] type=1505 audit(1273442396.240:7): operation="profile_replace" pid=708 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.200989] type=1505 audit(1273442396.240:8): operation="profile_replace" pid=708 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.208217] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 14.243463] type=1505 audit(1273442396.280:9): operation="profile_load" pid=715 name="/usr/bin/evince"
[ 14.324769] type=1505 audit(1273442396.364:10): operation="profile_load" pid=715 name="/usr/bin/evince-previewer"
[ 14.354434] type=1505 audit(1273442396.392:11): operation="profile_load" pid=715 name="/usr/bin/evince-thumbnailer"
xorg.0.log
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux petes-pavilion 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=75252eea-e8d9-4bb0-93b5-306901835c39 ro quiet splash
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <bryce@xxxxxxxxxx>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 9 17:59:57 2010
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2562:1043:8093 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xe8000000/134217728, 0xe7800000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xE7800000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers/sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers/ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers/ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers/tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers/ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: HWP Model: 2584 Serial#: 1496791094
(II) intel(0): Year: 2003 Week: 20
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) intel(0): Gamma: 2.88
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.324 greenX: 0.273 greenY: 0.607
(II) intel(0): blueX: 0.145 blueY: 0.060 whiteX: 0.284 whiteY: 0.297
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) intel(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 94.5 MHz Image Size: 312 x 234 mm
(II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) intel(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) intel(0): Ranges: V min: 50 V max: 140 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) intel(0): Monitor name: hp m703
(II) intel(0): Unknown vendor-specific block d
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0022f0842536383759
(II) intel(0): 140d0103682018bceac21ca353469b25
(II) intel(0): 0f484ca4420031594559615981800101
(II) intel(0): 010101010101ea240060410028303060
(II) intel(0): 130038ea1000001e000000fd00328c1e
(II) intel(0): 460b000a202020202020000000fc0068
(II) intel(0): 70206d3730330a20202020200000000d
(II) intel(0): 000202c4065c076f15a400e903170098
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (320, 240) mm
(**) intel(0): DPI set to (81, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 233472 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 933884 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x07ffefff: DRI memory manager (123008 kB)
(II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x0000000034eb7000 physical
)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007df000: start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x00c00000-0x00c04fff: HW cursors (20 kB)
(II) intel(0): 0x07fff000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
(**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event4"
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Found scroll wheel(s)
(II) Logitech USB Optical Mouse: Found relative axes
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(II) Logitech USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HWP", prod id 9604
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "HWP", prod id 9604
Thank you for taking the time to help me out.
--
gui crashes after screensaver changed (lucid)
https://bugs.launchpad.net/bugs/577508
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-server in ubuntu.
