ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #86189
[Bug 599337] Re: system freezed (keyboard mute) after a very short time navigating
Thank you for your care.
I'm still with Karmic and... random freezing!
I looked to https://wiki.ubuntu.com/X/Troubleshooting/Freeze
I installed openssh
After system freezed I succeed to login as root
I went to /sys/kernel/debug/dri/0 but all files remained empty in this repertory...
I only could execute dmesg
Here is its output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-22-generic (buildd@vernadsky) (gcc version 4.4.1 (Ubuntu 4.4.1-4
ubuntu8) ) #60-Ubuntu SMP Thu May 27 00:22:23 UTC 2010 (Ubuntu 2.6.31-22.60-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3f7f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000003f800000 - 00000000feda0000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f7f0000 (usable)
[ 0.000000] modified: 000000003f7f0000 - 000000003f800000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37866000 - 37fef252
[ 0.000000] Allocated new RAMDISK: 008b5000 - 0103e252
[ 0.000000] Move RAMDISK from 0000000037866000 - 0000000037fef251 to 008b5000 - 0103e251
[ 0.000000] ACPI: RSDP 000eaa10 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 000e6a40 00078 (v01 COMPAQ CPQ0050 20020528 00000000)
[ 0.000000] ACPI: FACP 000e6af8 00074 (v01 COMPAQ BROOKDG 00000001 00000000)
[ 0.000000] ACPI: DSDT 000e6bc6 00C29 (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000e6a00 00040
[ 0.000000] ACPI: SSDT 000e77ef 0059A (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e7d89 00545 (v01 COMPAQ CORE_PNP 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e82ce 0019B (v01 COMPAQ CORE_UTL 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e8469 00308 (v01 COMPAQ VILLTBL1 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e8771 00554 (v01 COMPAQ LGCYLITE 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e8cc5 00167 (v01 COMPAQ UART2 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e8e2c 0014E (v01 COMPAQ FLOPPY 00000001 MSFT 0100000E)
[ 0.000000] ACPI: APIC 000e6b6c 0005A (v01 COMPAQ BROOKDG 00000001 00000000)
[ 0.000000] ACPI: SSDT 000ea715 000AB (v01 COMPAQ APIC 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e92fe 00424 (v01 COMPAQ PNP_PRSS 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e9722 0016D (v01 COMPAQ UR2_PRSS 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e988f 00119 (v01 COMPAQ FPY_PRSS 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e9a40 00135 (v01 COMPAQ S3 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e9b75 0013B (v01 COMPAQ CORE_S3 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e9cb0 0019A (v01 COMPAQ PIDETM 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e9fe9 0012D (v01 COMPAQ GTF0 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000e9e4a 0019F (v01 COMPAQ SIDETM 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000ea248 00132 (v01 COMPAQ GTF2 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000ea4ac 000F6 (v01 COMPAQ L08 00000001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 000ea8a9 00053 (v01 COMPAQ FINIS 00000001 MSFT 0100000E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008b0160] TEXT DATA BSS ==> [0000100000 - 00008b0160]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008b1000 - 00008b40d8] BRK ==> [00008b1000 - 00008b40d8]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008b5000 - 000103e252] NEW RAMDISK ==> [00008b5000 - 000103e252]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f9bf0] f9bf0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f7f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7f0
[ 0.000000] On node 0 totalpages: 259979
[ 0.000000] free_area_init_node: node 0, pgdat c078ad40, node_mem_map c103f000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32498 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf400000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1833000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257947
[ 0.000000] Kernel command line: root=UUID=83063e19-311f-4076-a88c-585960e75fd9 ro quiet splash l
ocale=fr_FR
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5201600 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7f0)
[ 0.000000] Memory: 1009920k/1040320k available (4583k kernel code, 29712k reserved, 2150k data,
544k init, 131016k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0794000 - 0xc081c000 ( 544 kB)
[ 0.000000] .data : 0xc0579e48 - 0xc0793848 (2150 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0579e48 (4583 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.048 MHz processor.
[ 0.001699] Console: colour VGA+ 80x25
[ 0.001706] console [tty0] enabled
[ 0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.09 Bo
goMIPS (lpj=7976192)
[ 0.004058] Security Framework initialized
[ 0.004111] AppArmor: AppArmor initialized
[ 0.004126] Mount-cache hash table entries: 512
[ 0.004394] Initializing cgroup subsys ns
[ 0.004405] Initializing cgroup subsys cpuacct
[ 0.004413] Initializing cgroup subsys memory
[ 0.004431] Initializing cgroup subsys devices
[ 0.004436] Initializing cgroup subsys freezer
[ 0.004440] Initializing cgroup subsys net_cls
[ 0.004473] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004479] CPU: L2 cache: 512K
[ 0.004483] CPU: Hyper-Threading is disabled
[ 0.004491] mce: CPU supports 4 MCE banks
[ 0.004509] CPU0: Thermal monitoring enabled (TM1)
[ 0.004530] Performance Counters: no PMU driver, software counters only.
[ 0.004541] Checking 'hlt' instruction... OK.
[ 0.021301] SMP alternatives: switching to UP code
[ 0.032038] Freeing SMP alternatives: 20k freed
[ 0.032079] ACPI: Core revision 20090521
[ 0.039777] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079469] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (3988.09 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] Booting paravirtualized kernel on bare hardware
[ 0.080001] regulator: core version 0.5
[ 0.080001] Time: 22:26:10 Date: 08/27/10
[ 0.080001] NET: Registered protocol family 16
[ 0.080001] EISA bus registered
[ 0.080001] ACPI: bus type pci registered
[ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xeca78, last bus=5
[ 0.080001] PCI: Using configuration type 1 for base access
[ 0.080001] bio: create slab <bio-0> at 0
[ 0.080267] ACPI: EC: Look up EC in DSDT
[ 0.082884] ACPI: Interpreter enabled
[ 0.082895] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.082932] ACPI: Using IOAPIC for interrupt routing
[ 0.087561] ACPI: No dock devices found.
[ 0.087717] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.087789] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.087892] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.087903] pci 0000:00:02.0: reg 14 32bit mmio: [0xfc400000-0xfc47ffff]
[ 0.088062] pci 0000:00:1d.0: reg 20 io port: [0x2440-0x245f]
[ 0.088133] pci 0000:00:1d.1: reg 20 io port: [0x2460-0x247f]
[ 0.088213] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc480000-0xfc4803ff]
[ 0.088285] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.088292] pci 0000:00:1d.7: PME# disabled
[ 0.088362] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.088364] * this clock source is slow. If you are sure your timer does not have
[ 0.088366] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.088420] pci 0000:00:1f.0: Enabled i801 SMBus device
[ 0.088430] pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
[ 0.088436] pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH4 GPIO
[ 0.088471] pci 0000:00:1f.1: reg 10 io port: [0x24b0-0x24b7]
[ 0.088482] pci 0000:00:1f.1: reg 14 io port: [0x24c0-0x24c3]
[ 0.088491] pci 0000:00:1f.1: reg 18 io port: [0x24b8-0x24bf]
[ 0.088501] pci 0000:00:1f.1: reg 1c io port: [0x24c4-0x24c7]
[ 0.088511] pci 0000:00:1f.1: reg 20 io port: [0x24a0-0x24af]
[ 0.088520] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.088589] pci 0000:00:1f.3: reg 20 io port: [0xfc00-0xfc1f]
[ 0.088648] pci 0000:00:1f.5: reg 10 io port: [0x2000-0x20ff]
[ 0.088658] pci 0000:00:1f.5: reg 14 io port: [0x2400-0x243f]
[ 0.088668] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfc480400-0xfc4805ff]
[ 0.088677] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfc480600-0xfc4806ff]
[ 0.088716] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.088723] pci 0000:00:1f.5: PME# disabled
[ 0.088788] pci 0000:05:08.0: reg 10 32bit mmio: [0xfc500000-0xfc500fff]
[ 0.088798] pci 0000:05:08.0: reg 14 io port: [0x1000-0x103f]
[ 0.088847] pci 0000:05:08.0: supports D1 D2
[ 0.088851] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088857] pci 0000:05:08.0: PME# disabled
[ 0.088898] pci 0000:00:1e.0: transparent bridge
[ 0.088905] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[ 0.088911] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc500000-0xfc7fffff]
[ 0.088927] pci_bus 0000:00: on NUMA node 0
[ 0.088934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.089114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.093940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.094057] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.094177] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.094291] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.094404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.094517] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.094631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.094745] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.095062] SCSI subsystem initialized
[ 0.095185] libata version 3.00 loaded.
[ 0.095316] usbcore: registered new interface driver usbfs
[ 0.095338] usbcore: registered new interface driver hub
[ 0.095380] usbcore: registered new device driver usb
[ 0.095620] ACPI: WMI: Mapper loaded
[ 0.095624] PCI: Using ACPI for IRQ routing
[ 0.096010] Bluetooth: Core ver 2.15
[ 0.096065] NET: Registered protocol family 31
[ 0.096069] Bluetooth: HCI device and connection manager initialized
[ 0.096073] Bluetooth: HCI socket layer initialized
[ 0.096077] NetLabel: Initializing
[ 0.096080] NetLabel: domain hash size = 128
[ 0.096082] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.096105] NetLabel: unlabeled traffic allowed by default
[ 0.099260] pnp: PnP ACPI init
[ 0.099304] ACPI: bus type pnp registered
[ 0.102470] pnp 00:0d: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f),
disabling
[ 0.102478] pnp 00:0d: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f),
disabling
[ 0.102484] pnp 00:0d: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f),
disabling
[ 0.102490] pnp 00:0d: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f),
disabling
[ 0.103725] pnp: PnP ACPI: found 15 devices
[ 0.103729] ACPI: ACPI bus type pnp unregistered
[ 0.103736] PnPBIOS: Disabled by ACPI PNP
[ 0.103762] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 0.103771] system 00:0d: ioport range 0x400-0x41f has been reserved
[ 0.103777] system 00:0d: ioport range 0x420-0x43f has been reserved
[ 0.103782] system 00:0d: ioport range 0x440-0x45f has been reserved
[ 0.103787] system 00:0d: ioport range 0x460-0x47f has been reserved
[ 0.103792] system 00:0d: ioport range 0xfa00-0xfa3f has been reserved
[ 0.103798] system 00:0d: ioport range 0xfc00-0xfc7f could not be reserved
[ 0.103803] system 00:0d: ioport range 0xfc80-0xfcff has been reserved
[ 0.103808] system 00:0d: ioport range 0xfe00-0xfe7f has been reserved
[ 0.103813] system 00:0d: ioport range 0xfe80-0xfeff has been reserved
[ 0.103825] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.103831] system 00:0e: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.103836] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.103842] system 00:0e: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.103847] system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.103853] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.103858] system 00:0e: iomem range 0xcc400-0xcffff has been reserved
[ 0.103863] system 00:0e: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.138728] AppArmor: AppArmor Filesystem Enabled
[ 0.138765] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.138771] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 0.138780] pci 0000:00:1e.0: MEM window: 0xfc500000-0xfc7fffff
[ 0.138786] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.138807] pci 0000:00:1e.0: setting latency timer to 64
[ 0.138816] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.138822] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.138827] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
[ 0.138831] pci_bus 0000:05: resource 1 mem: [0xfc500000-0xfc7fffff]
[ 0.138835] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.138839] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.138905] NET: Registered protocol family 2
[ 0.139064] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.139706] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.141225] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.142121] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.142129] TCP reno registered
[ 0.142363] NET: Registered protocol family 1
[ 0.142497] Trying to unpack rootfs image as initramfs...
[ 0.482128] Freeing initrd memory: 7716k freed
[ 0.497398] cpufreq-nforce2: No nForce2 chipset.
[ 0.497451] Scanning for low memory corruption every 60 seconds
[ 0.497652] audit: initializing netlink socket (disabled)
[ 0.497686] type=2000 audit(1282947970.496:1): initialized
[ 0.509237] highmem bounce pool size: 64 pages
[ 0.509248] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.511578] VFS: Disk quotas dquot_6.5.2
[ 0.511679] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.512671] fuse init (API version 7.12)
[ 0.512816] msgmni has been set to 1732
[ 0.513143] alg: No test for stdrng (krng)
[ 0.513165] io scheduler noop registered
[ 0.513169] io scheduler anticipatory registered
[ 0.513172] io scheduler deadline registered
[ 0.513253] io scheduler cfq registered (default)
[ 0.513278] pci 0000:00:02.0: Boot video device
[ 0.513369] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.513491] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.513531] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.513721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.513728] ACPI: Power Button [PWRF]
[ 0.513826] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.513836] ACPI: Power Button [PBTN]
[ 0.514079] processor LNXCPU:00: registered as cooling_device0
[ 0.514085] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.516106] isapnp: Scanning for PnP cards...
[ 0.640045] Switched to high resolution mode on CPU 0
[ 0.870119] isapnp: No Plug & Play device found
[ 0.872043] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.872187] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.872300] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.872761] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.872926] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.874636] brd: module loaded
[ 0.875393] loop: module loaded
[ 0.875547] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.875722] ata_piix 0000:00:1f.1: version 2.13
[ 0.875746] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.875762] alloc irq_desc for 18 on node -1
[ 0.875766] alloc kstat_irqs on node -1
[ 0.875782] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.875873] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.876076] scsi0 : ata_piix
[ 0.876246] scsi1 : ata_piix
[ 0.876530] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24a0 irq 14
[ 0.876535] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24a8 irq 15
[ 0.877846] Fixed MDIO Bus: probed
[ 0.877910] PPP generic driver version 2.4.2
[ 0.878089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.878128] alloc irq_desc for 23 on node -1
[ 0.878133] alloc kstat_irqs on node -1
[ 0.878144] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.878168] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.878174] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.878232] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.882151] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.882162] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.882514] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000
[ 0.896012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.896167] usb usb1: configuration #1 chosen from 1 choice
[ 0.896218] hub 1-0:1.0: USB hub found
[ 0.896234] hub 1-0:1.0: 6 ports detected
[ 0.896327] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.896359] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.896435] alloc irq_desc for 16 on node -1
[ 0.896440] alloc kstat_irqs on node -1
[ 0.896450] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.896462] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.896468] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.896532] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.896574] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440
[ 0.896703] usb usb2: configuration #1 chosen from 1 choice
[ 0.896750] hub 2-0:1.0: USB hub found
[ 0.896774] hub 2-0:1.0: 2 ports detected
[ 0.896842] alloc irq_desc for 19 on node -1
[ 0.896847] alloc kstat_irqs on node -1
[ 0.896854] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.896864] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.896869] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.896931] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.896969] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460
[ 0.897095] usb usb3: configuration #1 chosen from 1 choice
[ 0.897138] hub 3-0:1.0: USB hub found
[ 0.897151] hub 3-0:1.0: 2 ports detected
[ 0.897320] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.900056] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.900067] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.900176] mice: PS/2 mouse device common for all mice
[ 0.900325] rtc_cmos 00:03: RTC can wake from S4
[ 0.900385] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.900413] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.900612] device-mapper: uevent: version 1.0.3
[ 0.900781] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.900908] device-mapper: multipath: version 1.1.0 loaded
[ 0.900913] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.901122] EISA: Probing bus 0 at eisa.0
[ 0.901133] Cannot allocate resource for EISA slot 1
[ 0.901137] Cannot allocate resource for EISA slot 2
[ 0.901165] EISA: Detected 0 cards.
[ 0.901243] cpuidle: using governor ladder
[ 0.901247] cpuidle: using governor menu
[ 0.902121] TCP cubic registered
[ 0.902345] NET: Registered protocol family 10
[ 0.903009] lo: Disabled Privacy Extensions
[ 0.903506] NET: Registered protocol family 17
[ 0.903539] Bluetooth: L2CAP ver 2.13
[ 0.903543] Bluetooth: L2CAP socket layer initialized
[ 0.903547] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.903550] Bluetooth: SCO socket layer initialized
[ 0.903621] Bluetooth: RFCOMM TTY layer initialized
[ 0.903626] Bluetooth: RFCOMM socket layer initialized
[ 0.903629] Bluetooth: RFCOMM ver 1.11
[ 0.903688] Using IPI No-Shortcut mode
[ 0.903821] PM: Resume from disk failed.
[ 0.903851] registered taskstats version 1
[ 0.904040] Magic number: 6:750:452
[ 0.904150] rtc_cmos 00:03: setting system clock to 2010-08-27 22:26:11 UTC (1282947971)
[ 0.904155] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.904159] EDD information not available.
[ 1.044615] ata2.00: ATAPI: Compaq CD-ROM SC-148E, B902, max MWDMA2
[ 1.044954] ata1.00: ATA-6: WDC WD400BB-23JHC0, 06.01C06, max UDMA/100
[ 1.044960] ata1.00: 78156288 sectors, multi 16: LBA
[ 1.060392] ata2.00: configured for MWDMA2
[ 1.060653] ata1.00: configured for UDMA/100
[ 1.060846] scsi 0:0:0:0: Direct-Access ATA WDC WD400BB-23JH 06.0 PQ: 0 ANSI: 5
[ 1.061064] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.061146] sd 0:0:0:0: [sda] 78156288 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.061225] sd 0:0:0:0: [sda] Write Protect is off
[ 1.061231] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.061270] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or F
UA
[ 1.061484] sda:
[ 1.061965] scsi 1:0:0:0: CD-ROM Compaq CD-ROM SC-148E B902 PQ: 0 ANSI: 5
[ 1.067717] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 1.067724] Uniform CD-ROM driver Revision: 3.20
[ 1.067872] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.067968] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.068558] sda1 sda2 < sda5 >
[ 1.091222] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.091250] Freeing unused kernel memory: 544k freed
[ 1.092273] Write protecting the kernel text: 4584k
[ 1.092325] Write protecting the kernel read-only data: 1844k
[ 1.439633] Linux agpgart interface v0.103
[ 1.461180] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.478477] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 1.478729] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 1.481227] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 1.485051] Floppy drive(s): fd0 is 1.44M
[ 1.583236] FDC 0 is a post-1991 82077
[ 1.669662] [drm] Initialized drm 1.1.0 20060810
[ 1.695431] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.695443] i915 0000:00:02.0: setting latency timer to 64
[ 1.707059] usb 3-1: configuration #1 chosen from 1 choice
[ 1.716502] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.716508] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.716588] alloc irq_desc for 20 on node -1
[ 1.716592] alloc kstat_irqs on node -1
[ 1.716605] e100 0000:05:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.806757] e100 0000:05:08.0: PME# disabled
[ 1.829630] usbcore: registered new interface driver hiddev
[ 1.949007] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/
usb3/3-1/3-1:1.0/input/input3
[ 1.949141] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Techno
logy USB Multimedia Keyboard] on usb-0000:00:1d.1-1/input0
[ 1.949179] usbcore: registered new interface driver usbhid
[ 1.949184] usbhid: v2.6:USB HID core driver
[ 1.966612] e100: eth0: e100_probe: addr 0xfc500000, irq 20, MAC addr 00:08:02:a9:77:db
[ 1.986393] [drm] fb0: inteldrmfb frame buffer device
[ 1.986412] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.092468] [drm] DAC-5: set mode 1280x1024 17
[ 2.100457] Console: switching to colour frame buffer device 160x64
[ 2.124049] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.320229] usb 3-2: configuration #1 chosen from 1 choice
[ 2.340645] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/
input4
[ 2.340819] generic-usb 0003:046D:C00C.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Mou
se] on usb-0000:00:1d.1-2/input0
[ 2.456847] xor: automatically using best checksumming function: pIII_sse
[ 2.476009] pIII_sse : 2533.000 MB/sec
[ 2.476014] xor: using function: pIII_sse (2533.000 MB/sec)
[ 2.482040] device-mapper: dm-raid45: initialized v0.2594b
[ 2.743284] PM: Starting manual resume from disk
[ 2.743293] PM: Resume from partition 8:5
[ 2.743296] PM: Checking hibernation image.
[ 2.743552] PM: Resume from disk failed.
[ 2.772853] kjournald starting. Commit interval 5 seconds
[ 2.772878] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.844225] type=1505 audit(1282947974.439:2): operation="profile_load" pid=362 name=/usr/share/g
dm/guest-session/Xsession
[ 3.868057] type=1505 audit(1282947974.463:3): operation="profile_load" pid=363 name=/sbin/dhclie
nt3
[ 3.868889] type=1505 audit(1282947974.463:4): operation="profile_load" pid=363 name=/usr/lib/Net
workManager/nm-dhcp-client.action
[ 3.869344] type=1505 audit(1282947974.463:5): operation="profile_load" pid=363 name=/usr/lib/con
nman/scripts/dhclient-script
[ 3.907895] type=1505 audit(1282947974.499:6): operation="profile_load" pid=364 name=/usr/bin/evi
nce
[ 3.922412] type=1505 audit(1282947974.515:7): operation="profile_load" pid=364 name=/usr/bin/evi
nce-previewer
[ 3.930960] type=1505 audit(1282947974.523:8): operation="profile_load" pid=364 name=/usr/bin/evi
nce-thumbnailer
[ 3.991107] type=1505 audit(1282947974.583:9): operation="profile_load" pid=366 name=/usr/lib/cup
s/backend/cups-pdf
[ 3.992119] type=1505 audit(1282947974.587:10): operation="profile_load" pid=366 name=/usr/sbin/c
upsd
[ 5.787538] Adding 861800k swap on /dev/sda5. Priority:-1 extents:1 across:861800k
[ 6.519491] EXT3 FS on sda1, internal journal
[ 7.761790] udev: starting version 147
[ 10.548312] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.643465] intel_rng: Firmware space is locked read-only. If you can't or
[ 10.643469] intel_rng: don't want to disable this in firmware setup, and if
[ 10.643471] intel_rng: you are certain that your system has a functional
[ 10.643473] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 10.668391] parport_pc 00:07: reported by Plug and Play ACPI
[ 10.668453] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.686829] ppdev: user-space parallel port driver
[ 10.697741] lp: driver loaded but no devices found
[ 10.711796] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.760961] lp0: using parport0 (interrupt-driven).
[ 12.707566] alloc irq_desc for 17 on node -1
[ 12.707572] alloc kstat_irqs on node -1
[ 12.707585] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.707651] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 13.128032] intel8x0_measure_ac97_clock: measured 54796 usecs (2640 samples)
[ 13.128039] intel8x0: clocking to 48000
[ 13.989887] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.816153] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 15.816454] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.876292] __ratelimit: 3 callbacks suppressed
[ 19.876298] type=1505 audit(1282947990.471:12): operation="profile_replace" pid=970 name=/usr/sha
re/gdm/guest-session/Xsession
[ 10.760961] lp0: using parport0 (interrupt-driven).
[ 12.707566] alloc irq_desc for 17 on node -1
[ 12.707572] alloc kstat_irqs on node -1
[ 12.707585] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.707651] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 13.128032] intel8x0_measure_ac97_clock: measured 54796 usecs (2640 samples)
[ 13.128039] intel8x0: clocking to 48000
[ 13.989887] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.816153] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 15.816454] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.876292] __ratelimit: 3 callbacks suppressed
[ 19.876298] type=1505 audit(1282947990.471:12): operation="profile_replace" pid=970 name=/usr/sha
re/gdm/guest-session/Xsession
[ 19.893124] type=1505 audit(1282947990.487:13): operation="profile_replace" pid=972 name=/sbin/dh
client3
[ 19.893964] type=1505 audit(1282947990.487:14): operation="profile_replace" pid=972 name=/usr/lib
/NetworkManager/nm-dhcp-client.action
[ 19.894419] type=1505 audit(1282947990.487:15): operation="profile_replace" pid=972 name=/usr/lib
/connman/scripts/dhclient-script
[ 19.911324] type=1505 audit(1282947990.503:16): operation="profile_replace" pid=977 name=/usr/bin
/evince
[ 19.929354] type=1505 audit(1282947990.523:17): operation="profile_replace" pid=977 name=/usr/bin
/evince-previewer
[ 19.943740] type=1505 audit(1282947990.535:18): operation="profile_replace" pid=977 name=/usr/bin
/evince-thumbnailer
[ 19.989289] type=1505 audit(1282947990.583:19): operation="profile_replace" pid=988 name=/usr/lib
/cups/backend/cups-pdf
[ 19.990545] type=1505 audit(1282947990.583:20): operation="profile_replace" pid=988 name=/usr/sbi
n/cupsd
[ 19.999192] type=1505 audit(1282947990.591:21): operation="profile_replace" pid=989 name=/usr/sbi
n/tcpdump
[ 25.687366] render error detected, EIR: 0x00000010
[ 25.687377] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 25.687392] render error detected, EIR: 0x00000010
[ 26.296014] eth0: no IPv6 routers present
--
system freezed (keyboard mute) after a very short time navigating
https://bugs.launchpad.net/bugs/599337
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-evdev in ubuntu.
