ubuntuforums-unanswered team mailing list archive

[Adam-Struck <question77481@xxxxxxxxxxxxxxxxxxxxx>]

Question #77481 on Ubuntu changed:
https://answers.launchpad.net/ubuntu/+question/77481

    Status: Needs information => Open

Adam-Struck gave more information on the question:
[    0.825060] pci 0000:00:1e.0:   MEM window: 0x40000000-0x403fffff
[    0.825067] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000057ffffff
[    0.825092] pci 0000:00:1e.0: setting latency timer to 64
[    0.825613] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11
[    0.825618] PCI: setting IRQ 11 as level-triggered
[    0.825624] pci 0000:02:06.0: PCI INT A -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
[    0.825640] pci 0000:02:06.1: PCI INT A -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
[    0.825648] bus: 00 index 0 io port: [0x00-0xffff]
[    0.825652] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.825657] bus: 01 index 0 io port: [0x3000-0x3fff]
[    0.825661] bus: 01 index 1 mmio: [0x40400000-0x404fffff]
[    0.825665] bus: 01 index 2 mmio: [0x48000000-0x4fffffff]
[    0.825668] bus: 01 index 3 mmio: [0x0-0x0]
[    0.825671] bus: 02 index 0 io port: [0x2000-0x2fff]
[    0.825675] bus: 02 index 1 mmio: [0x40000000-0x403fffff]
[    0.825678] bus: 02 index 2 mmio: [0x50000000-0x57ffffff]
[    0.825682] bus: 02 index 3 io port: [0x00-0xffff]
[    0.825685] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[    0.825689] bus: 03 index 0 io port: [0x2800-0x28ff]
[    0.825692] bus: 03 index 1 io port: [0x2c00-0x2cff]
[    0.825695] bus: 03 index 2 mmio: [0x50000000-0x53ffffff]
[    0.825699] bus: 03 index 3 mmio: [0x5c000000-0x5fffffff]
[    0.825703] bus: 04 index 0 io port: [0x1400-0x14ff]
[    0.825706] bus: 04 index 1 io port: [0x1800-0x18ff]
[    0.825709] bus: 04 index 2 mmio: [0x54000000-0x57ffffff]
[    0.825713] bus: 04 index 3 mmio: [0x70000000-0x73ffffff]
[    0.825729] NET: Registered protocol family 2
[    0.825951] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.826510] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.827990] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.828969] TCP: Hash tables configured (established 131072 bind 65536)
[    0.828979] TCP reno registered
[    0.829240] NET: Registered protocol family 1
[    0.829485] checking if image is initramfs... it is
[    1.328073] Switched to high resolution mode on CPU 0
[    1.860993] Freeing initrd memory: 7380k freed
[    1.861282] cpufreq: No nForce2 chipset.
[    1.861502] audit: initializing netlink socket (disabled)
[    1.861537] type=2000 audit(1247988632.860:1): initialized
[    1.872415] highmem bounce pool size: 64 pages
[    1.872429] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.874529] VFS: Disk quotas dquot_6.5.1
[    1.874633] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.875710] fuse init (API version 7.10)
[    1.875851] msgmni has been set to 1724
[    1.876217] alg: No test for stdrng (krng)
[    1.876239] io scheduler noop registered
[    1.876243] io scheduler anticipatory registered
[    1.876246] io scheduler deadline registered
[    1.876281] io scheduler cfq registered (default)
[    1.876314] pci 0000:01:00.0: Boot video device
[    1.876361] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    1.888760] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.888779] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.889163] ACPI: AC Adapter [C19A] (on-line)
[    2.017976] ACPI: Battery Slot [C198] (battery present)
[    2.018158] ACPI: Battery Slot [C199] (battery absent)
[    2.018279] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.018283] ACPI: Power Button (FF) [PWRF]
[    2.018386] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    2.018396] ACPI: Sleep Button (CM) [C19B]
[    2.018474] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    2.018600] ACPI: Lid Switch [C19C]
[    2.018928] fan PNP0C0B:00: registered as cooling_device0
[    2.018938] ACPI: Fan [C1EE] (off)
[    2.019212] fan PNP0C0B:01: registered as cooling_device1
[    2.019222] ACPI: Fan [C1EF] (off)
[    2.019493] fan PNP0C0B:02: registered as cooling_device2
[    2.019502] ACPI: Fan [C1F0] (off)
[    2.019837] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.019875] processor ACPI_CPU:00: registered as cooling_device3
[    2.019881] ACPI: Processor [C000] (supports 8 throttling states)
[    2.034430] thermal LNXTHERM:01: registered as thermal_zone0
[    2.038076] ACPI: Thermal Zone [TZ1] (16 C)
[    2.039023] thermal LNXTHERM:02: registered as thermal_zone1
[    2.039792] ACPI: Thermal Zone [C1EA] (45 C)
[    2.039872] isapnp: Scanning for PnP cards...
[    2.393124] isapnp: No Plug & Play device found
[    2.395942] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.396085] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.396238] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    2.396546] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.398072] brd: module loaded
[    2.398636] loop: module loaded
[    2.398779] Fixed MDIO Bus: probed
[    2.398790] PPP generic driver version 2.4.2
[    2.398904] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    2.398960] Driver 'sd' needs updating - please use bus_type methods
[    2.398978] Driver 'sr' needs updating - please use bus_type methods
[    2.399098] ata_piix 0000:00:1f.1: version 2.12
[    2.399116] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    2.399691] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[    2.399697] PCI: setting IRQ 10 as level-triggered
[    2.399704] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    2.399788] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.399975] scsi0 : ata_piix
[    2.400192] scsi1 : ata_piix
[    2.401441] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4440 irq 14
[    2.401446] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4448 irq 15
[    2.564576] ata1.00: ATA-5: IC25N040ATCS05-0, CS4OA61A, max UDMA/100
[    2.564581] ata1.00: 78140160 sectors, multi 16: LBA 
[    2.580530] ata1.00: configured for UDMA/100
[    2.744361] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, 0109, max MWDMA2
[    2.872338] ata2.00: configured for MWDMA2
[    2.873366] scsi 0:0:0:0: Direct-Access     ATA      IC25N040ATCS05-0 CS4O PQ: 0 ANSI: 5
[    2.873543] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[    2.873571] sd 0:0:0:0: [sda] Write Protect is off
[    2.873576] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.873619] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.873732] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[    2.873756] sd 0:0:0:0: [sda] Write Protect is off
[    2.873761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.873803] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.873809]  sda: sda1 sda2 < sda5 >
[    2.916772] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.916869] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.921102] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4240N 0109 PQ: 0 ANSI: 5
[    3.043434] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    3.043439] Uniform CD-ROM driver Revision: 3.20
[    3.043617] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.043696] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.044749] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.045348] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
[    3.045356] ehci_hcd 0000:02:0e.2: PCI INT C -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    3.045394] ehci_hcd 0000:02:0e.2: EHCI Host Controller
[    3.045514] ehci_hcd 0000:02:0e.2: new USB bus registered, assigned bus number 1
[    3.068066] ehci_hcd 0000:02:0e.2: irq 10, io mem 0x40300000
[    3.080032] ehci_hcd 0000:02:0e.2: USB 2.0 started, EHCI 0.95
[    3.080150] usb usb1: configuration #1 chosen from 1 choice
[    3.080198] hub 1-0:1.0: USB hub found
[    3.080215] hub 1-0:1.0: 5 ports detected
[    3.080401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.080443] ohci_hcd 0000:02:0e.0: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    3.080465] ohci_hcd 0000:02:0e.0: OHCI Host Controller
[    3.080551] ohci_hcd 0000:02:0e.0: new USB bus registered, assigned bus number 2
[    3.080571] ohci_hcd 0000:02:0e.0: irq 10, io mem 0x40180000
[    3.642143] usb usb2: configuration #1 chosen from 1 choice
[    3.642188] hub 2-0:1.0: USB hub found
[    3.642207] hub 2-0:1.0: 3 ports detected
[    3.642353] ohci_hcd 0000:02:0e.1: PCI INT B -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    3.642372] ohci_hcd 0000:02:0e.1: OHCI Host Controller
[    3.642449] ohci_hcd 0000:02:0e.1: new USB bus registered, assigned bus number 3
[    3.642471] ohci_hcd 0000:02:0e.1: irq 10, io mem 0x40200000
[    4.202149] usb usb3: configuration #1 chosen from 1 choice
[    4.202200] hub 3-0:1.0: USB hub found
[    4.202215] hub 3-0:1.0: 2 ports detected
[    4.202352] uhci_hcd: USB Universal Host Controller Interface driver
[    4.202519] PNP: PS/2 Controller [PNP0303:C17E,PNP0f13:C17F] at 0x60,0x64 irq 1,12
[    4.204100] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.204876] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.204885] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.204890] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.204894] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.204898] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.205177] mice: PS/2 mouse device common for all mice
[    4.205454] rtc_cmos 00:09: RTC can wake from S4
[    4.205520] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    4.205544] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    4.205661] device-mapper: uevent: version 1.0.3
[    4.205851] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    4.205929] device-mapper: multipath: version 1.0.5 loaded
[    4.205935] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.206077] EISA: Probing bus 0 at eisa.0
[    4.206088] Cannot allocate resource for EISA slot 1
[    4.206092] Cannot allocate resource for EISA slot 2
[    4.206096] Cannot allocate resource for EISA slot 3
[    4.206099] Cannot allocate resource for EISA slot 4
[    4.206114] EISA: Detected 0 cards.
[    4.206235] cpuidle: using governor ladder
[    4.206332] cpuidle: using governor menu
[    4.207217] TCP cubic registered
[    4.207363] NET: Registered protocol family 10
[    4.208073] lo: Disabled Privacy Extensions
[    4.208617] NET: Registered protocol family 17
[    4.208649] Bluetooth: L2CAP ver 2.11
[    4.208652] Bluetooth: L2CAP socket layer initialized
[    4.208657] Bluetooth: SCO (Voice Link) ver 0.6
[    4.208660] Bluetooth: SCO socket layer initialized
[    4.208721] Bluetooth: RFCOMM socket layer initialized
[    4.208735] Bluetooth: RFCOMM TTY layer initialized
[    4.208738] Bluetooth: RFCOMM ver 1.10
[    4.208802] IO APIC resources could be not be allocated.
[    4.208845] Using IPI No-Shortcut mode
[    4.209004] registered taskstats version 1
[    4.209174]   Magic number: 1:651:521
[    4.209248] power LNXPOWER:05: hash matches
[    4.209313] rtc_cmos 00:09: setting system clock to 2009-07-19 07:30:35 UTC (1247988635)
[    4.209319] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.209322] EDD information not available.
[    4.210244] Freeing unused kernel memory: 532k freed
[    4.210425] Write protecting the kernel text: 4112k
[    4.210487] Write protecting the kernel read-only data: 1524k
[    4.247981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    5.071025] Floppy drive(s): fd0 is 1.44M
[    5.089126] FDC 0 is a post-1991 82077
[    5.328757] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[    5.328763] e100: Copyright(c) 1999-2006 Intel Corporation
[    5.328840] e100 0000:02:08.0: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    5.419891] e100 0000:02:08.0: PME# disabled
[    5.502568] e100: eth0: e100_probe: addr 0x40100000, irq 10, MAC addr 00:02:a5:b9:28:b1
[    7.160571] Marking TSC unstable due to TSC halts in idle
[    7.192075] PM: Starting manual resume from disk
[    7.192082] PM: Resume from partition 8:5
[    7.192085] PM: Checking hibernation image.
[    7.192311] PM: Resume from disk failed.
[    7.197074] EXT3-fs: INFO: recovery required on readonly filesystem.
[    7.197081] EXT3-fs: write access will be enabled during recovery.
[    7.836346] kjournald starting.  Commit interval 5 seconds
[    7.836377] EXT3-fs: recovery complete.
[    7.837223] EXT3-fs: mounted filesystem with ordered data mode.
[   16.043181] udev: starting version 141
[   16.230406] Linux agpgart interface v0.103
[   16.271532] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[   16.297640] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x60000000
[   16.375872] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
[   16.402449] parport_pc 00:05: reported by Plug and Play ACPI
[   16.402508] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   16.404226] ACPI: Video Device [C0CE] (multi-head: yes  rom: no  post: no)
[   16.414797] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.418342] intel_rng: FWH not detected
[   16.684569] yenta_cardbus 0000:02:06.0: CardBus bridge found [0e11:00b7]
[   16.684593] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[   16.684601] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI
[   16.684605] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   16.684612] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01001002, devctl 0x64
[   16.785636] iTCO_vendor_support: vendor-support=0
[   16.788860] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   16.789062] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[   16.789246] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.821050] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   16.917083] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0038, PCI irq 11
[   16.917090] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   16.917101] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   16.917107] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[   16.917557] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x403fffff
[   16.917563] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
[   16.932479] yenta_cardbus 0000:02:06.1: CardBus bridge found [0e11:00b7]
[   16.932504] yenta_cardbus 0000:02:06.1: Using CSCINT to route CSC interrupts to PCI
[   16.932508] yenta_cardbus 0000:02:06.1: Routing CardBus interrupts to PCI
[   16.932515] yenta_cardbus 0000:02:06.1: TI: mfunc 0x01001002, devctl 0x64
[   17.165140] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0038, PCI irq 11
[   17.165148] yenta_cardbus 0000:02:06.1: Socket status: 30000006
[   17.165155] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[   17.165168] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   17.165175] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x2000-0x2fff: clean.
[   17.165552] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x403fffff
[   17.165558] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
[   17.265208] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   17.465148] ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 11
[   17.465158] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C1] -> GSI 11 (level, low) -> IRQ 11
[   17.465185] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   17.596851] ppdev: user-space parallel port driver
[   17.745411] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[   17.746671] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[   17.747217] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[   17.747703] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[   17.748507] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[   18.136058] intel8x0_measure_ac97_clock: measured 54558 usecs
[   18.136063] intel8x0: clocking to 48000
[   18.214110] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[   18.215376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   18.215932] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   18.216484] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   18.217208] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   18.324055] Clocksource tsc unstable (delta = -275902835 ns)
[   18.367027] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9b48b1, caps: 0x884793/0x0
[   18.367037] serio: Synaptics pass-through port at isa0060/serio4/input0
[   18.430591] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[   18.451267] lp0: using parport0 (interrupt-driven).
[   18.647830] Adding 1646620k swap on /dev/sda5.  Priority:-1 extents:1 across:1646620k
[   19.243228] EXT3 FS on sda1, internal journal
[   20.018882] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   20.640941] type=1505 audit(1247988651.930:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1947
[   20.728706] type=1505 audit(1247988652.018:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1951
[   20.729047] type=1505 audit(1247988652.018:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1951
[   20.729157] type=1505 audit(1247988652.018:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1951
[   20.729250] type=1505 audit(1247988652.018:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1951
[   20.981479] type=1505 audit(1247988652.270:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1956
[   20.981924] type=1505 audit(1247988652.270:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1956
[   21.036850] type=1505 audit(1247988652.326:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1961
[   22.089062] psmouse serio5: ID: 10 00 64<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.258737] Bluetooth: BNEP filters: protocol multicast
[   26.281875] Bridge firewalling registered
[   26.925529] IBM TrackPoint firmware: 0x0b, buttons: 2/3
[   27.238170] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input8
[   28.436181] ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
[   28.436190] pci 0000:01:00.0: PCI INT A -> Link[C0C0] -> GSI 11 (level, low) -> IRQ 11
[   28.769931] [drm] Initialized drm 1.1.0 20060810
[   28.848978] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   29.405889] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   29.405916] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   29.405937] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[   29.702908] [drm] Setting GART location based on new memory map
[   29.702922] [drm] Loading R100 Microcode
[   29.702981] [drm] writeback test succeeded in 1 usecs
[   32.725996] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  551.312161] usb 1-1: new high speed USB device using ehci_hcd and address 2
[  551.447435] usb 1-1: string descriptor 0 read error: -61
[  551.450059] usb 1-1: string descriptor 0 read error: -61
[  551.452437] usb 1-1: string descriptor 0 read error: -61
[  551.452629] usb 1-1: configuration #1 chosen from 1 choice
[  551.592589] Initializing USB Mass Storage driver...
[  551.595256] scsi2 : SCSI emulation for USB Mass Storage devices
[  551.595840] usbcore: registered new interface driver usb-storage
[  551.595851] USB Mass Storage support registered.
[  551.649642] usb-storage: device found at 2
[  551.649651] usb-storage: waiting for device to settle before scanning
[  556.649305] usb-storage: device scan complete
[  556.655134] scsi 2:0:0:0: Direct-Access     Seagate  External Drive        PQ: 0 ANSI: 0
[  556.659734] sd 2:0:0:0: [sdb] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[  556.660870] sd 2:0:0:0: [sdb] Write Protect is off
[  556.660881] sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00
[  556.660888] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  556.709225] sd 2:0:0:0: [sdb] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[  556.710235] sd 2:0:0:0: [sdb] Write Protect is off
[  556.710245] sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00
[  556.710252] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  556.710267]  sdb: sdb1
[  556.728946] sd 2:0:0:0: [sdb] Attached SCSI disk
[  556.729117] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6062.701500] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[ 6062.701506] PM: Marking nosave pages: 0000000000007000 - 0000000000010000
[ 6062.701510] PM: Marking nosave pages: 0000000000092000 - 0000000000100000
[ 6062.701517] PM: Basic memory bitmaps created
[ 6062.701520] PM: Syncing filesystems ... done.
[ 6062.973883] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 6062.976622] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 6062.976761] PM: Shrinking memory... done (96794 pages freed)
[ 6064.489375] PM: Freed 387176 kbytes in 1.51 seconds (256.40 MB/s)
[ 6064.489396] Suspending console(s) (use no_console_suspend to debug)
[ 6064.489952] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6064.490276] ACPI handle has no context!
[ 6064.495053] parport_pc 00:05: disabled
[ 6064.499140] serial 00:02: disabled
[ 6064.512110] ehci_hcd 0000:02:0e.2: PCI INT C disabled
[ 6064.512164] ohci_hcd 0000:02:0e.1: PCI INT B disabled
[ 6064.512215] ohci_hcd 0000:02:0e.0: PCI INT A disabled
[ 6064.512258] e100 0000:02:08.0: PCI INT A disabled
[ 6064.528538] Intel ICH 0000:00:1f.5: PCI INT B disabled
[ 6064.528774] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 6064.537644] ACPI: Preparing to enter system sleep state S4
[ 6064.537977] Disabling non-boot CPUs ...
[ 6064.538114] PM: Creating hibernation image: 
[ 6064.540017] PM: Need to copy 120925 pages
[ 6064.540017] PM: Normal pages needed: 113218 + 1024 + 26, available pages: 133335
[ 6064.540686] ACPI: Waking up from system sleep state S4
[ 6064.704362] pm_op(): pci_pm_restore+0x0/0x70 returns -16
[ 6064.704368] PM: Device 0000:00:00.0 failed to restore: error -16
[ 6064.704415] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20040200, writing 0x20070200)
[ 6064.704438] pci 0000:00:1e.0: setting latency timer to 64
[ 6064.704502] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800003, writing 0x2800007)
[ 6064.704519] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 6064.704526] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 6064.711296] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 6064.711311] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C1] -> GSI 11 (level, low) -> IRQ 11
[ 6064.711320] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 6064.868750] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 6064.868755] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 6064.868758] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 6064.868762] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
[ 6064.868845] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 6064.868849] ata2.00: ACPI cmd ef/03:22:00:00:00:a0 filtered out
[ 6064.869086] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 6064.884594] ata2.00: configured for MWDMA2
[ 6064.892725] ata1.00: configured for UDMA/100
[ 6064.916703] ata1.00: configured for UDMA/100
[ 6064.916708] ata1: EH complete
[ 6064.916805] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 6064.916834] sd 0:0:0:0: [sda] Write Protect is off
[ 6064.916838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6064.916882] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6064.916929] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 6064.916954] sd 0:0:0:0: [sda] Write Protect is off
[ 6064.916957] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6064.916998] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6065.065965] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00083, writing 0x2b00087)
[ 6065.065990] pci 0000:01:00.0: PCI INT A -> Link[C0C0] -> GSI 11 (level, low) -> IRQ 11
[ 6065.066047] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x3c4010b, writing 0x5c0010b)
[ 6065.066072] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x824208, writing 0x82a820)
[ 6065.204148] yenta_cardbus 0000:02:06.1: restoring config space at offset 0xf (was 0x3c401ff, writing 0x5c001ff)
[ 6065.204173] yenta_cardbus 0000:02:06.1: restoring config space at offset 0x3 (was 0x824208, writing 0x82a820)
[ 6065.360141] e100 0000:02:08.0: restoring config space at offset 0xf (was 0x38080100, writing 0x3808010a)
[ 6065.360163] e100 0000:02:08.0: restoring config space at offset 0x5 (was 0x1, writing 0x2401)
[ 6065.360170] e100 0000:02:08.0: restoring config space at offset 0x4 (was 0x0, writing 0x40100000)
[ 6065.360176] e100 0000:02:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x4208)
[ 6065.360185] e100 0000:02:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[ 6065.360209] ohci_hcd 0000:02:0e.0: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[ 6065.384140] ohci_hcd 0000:02:0e.1: PCI INT B -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[ 6065.408141] ehci_hcd 0000:02:0e.2: PCI INT C -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[ 6065.415584] serial 00:02: activated
[ 6065.429034] parport_pc 00:05: activated
[ 6065.429331] sd 0:0:0:0: [sda] Starting disk
[ 6065.489500] pm_op(): usb_dev_restore+0x0/0x10 returns -19
[ 6065.489505] PM: Device 1-1 failed to restore: error -19
[ 6065.489878] PM: Image restored successfully.
[ 6065.554613] Restarting tasks ... <6>usb 1-1: USB disconnect, address 2
[ 6065.623612] done.
[ 6065.623640] PM: Basic memory bitmaps freed
[ 6065.644689] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 6068.742125] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6069.220080] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 6069.486916] usb 2-2: configuration #2 chosen from 2 choices
[ 6070.110681] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 6070.110717] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 6070.110746] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 6070.110821] [drm] Loading R100 Microcode
[ 6070.508822] eth1: register 'cdc_ether' at usb-0000:02:0e.0-2, CDC Ethernet Device, 00:15:05:52:5a:c2
[ 6070.508999] usbcore: registered new interface driver cdc_ether
[ 6085.108059] eth1: no IPv6 routers present
[11313.768073] usb 1-1: new high speed USB device using ehci_hcd and address 3
[11313.948590] usb 1-1: configuration #1 chosen from 1 choice
adam@adam-laptop:~$

-- 
You received this question notification because you are a member of UF
Unanswered Posts Team, which is an answer contact for Ubuntu.